Materials Transactions Online

Materials Transactions, Vol.62 No.10 (2021)

1429-1438 :
Theoretical Approach for Long-Ranged Local Lattice Distortion in Al-Rich AlX (X = H∼Sn) Disordered Alloys by Kanzaki Model Combined with KKR Green’s Function Method
Mitsuhiro Asato, Chang Liu, Nobuhisa Fujima and Toshiharu Hoshino
1439-1447 :
Effects of B2O3 and CaO/Al2O3 on Structure of CaO-Al2O3-B2O3 System
Shou-lin Huang, Ting Wu, Jie Lei, Hui Kong, Hai-chuan Wang and Zheng-wei Yu
1448-1456 :
Soft X-ray XAFS Analysis of Cluster Formation Behavior during Natural Aging on an Al-Mg-Si Alloy
Serina Tanaka, Hiroki Adachi and Takehiro Nonomura
1457-1461 :
Immobilization of Silver Nanoparticles on the Surface of Cellulose Nanofibers Using High-Pressure Wet-Type Jet Mill
Mitsuaki Furutani, Eiji Fujii and Kota Ogura
1462-1470 :
Effect of Different Concentrations of Nano-Cubic Boron Nitride on the Preparation of TiO2/Ti/Fe Composite Materials by Thermal Sprayed and Micro-Arc Oxidation
Chang-Chiun Huang, Huang-Ming Li, Sheng-Yuan Lin and Dong-Han Li
1471-1478 :
Effect of Plastic Anisotropy on Ironing Formability of 3104 Aluminum Alloy Hard Sheets
Yuji Inoue and Masahiro Yamaguchi
1479-1488 :
Effects of Grain Boundary Geometry and Boron Addition on the Local Mechanical Behavior of Interstitial-Free (IF) Steels
Kazuki Endoh, Seiichiro Ii, Yuuji Kimura, Taisuke Sasaki, Sota Goto, Takeshi Yokota and Takahito Ohmura
1489-1494 :
Numerical Simulation of Tribocorrosion of CoCr Alloy and Ti with Galvanic Coupling in Simulated Body Fluid
Sayaka Miyabe, Norifumi Fujii and Shinji Fujimoto
1495-1501 :
Recovery of Palladium and Platinum Particles Suspended in the Al2O3-CaO-SiO2 Slag Using Copper-Based Extractants at 1723 K
Takashi Murata and Katsunori Yamaguchi
1502-1509 :
Combined Effect of Gas Blow Induction Heating Nitriding and Post-Treatment with Fine Particle Peening on Surface Properties and Wear Resistance of Titanium Alloy
Shogo Takesue, Shoichi Kikuchi, Yoshitaka Misaka, Tatsuro Morita and Jun Komotori
1510-1518 :
Development of a Powder Wettability Evaluation Technique by Analyzing the Increase in Internal Pressure due to Capillary Suction of Closed Powder Bed —Effect of Powder-Bed-Preparation Method and Powder Surface Area Estimation Method—
Takamasa Mori, Keita Ohno, Takumi Suzuki, Hiroshi Satone and JunIchiro Tsubaki
1519-1523 :
Negligible Temperature Dependence of Nitrogen Solubility in Molten Silicon-Chromium Alloys at Middle Composition Range
Sakiko Kawanishi, Shogo Hachinoda and Hiroyuki Shibata
1524-1532 :
Wettability of Pure Metals with Liquid Sodium and Liquid Tin
Jun-ichi Saito, Yohei Kobayashi and Hideo Shibutani
1533-1540 :
Reduction of Titanium Dioxide to Metallic Titanium by Thermal Decomposition via Titanium Disulfide
Ichiro Seki
1541-1548 :
Cobalt Alloying Effect on Improvement of Ni/YSZ Anode-Supported Solid Oxide Fuel Cell Operating with Dry Methane
Nicharee Wongsawatgul, Soamwadee Chaianansutcharit, Kazuhiro Yamamoto, Makoto Nanko and Kazunori Sato
1549-1555 :
Evaluation of Porosity in Gas-Atomized Powder by Synchrotron X-ray CT and Investigation of the Effect of Gas Species
Noriharu Yodoshi, Takahide Endo and Naoya Masahashi
1556-1561 :
Influence of Chunky Graphite on Fatigue Crack Propagation Characteristics in Heavy Section Spheroidal Graphite Cast Iron
Kohei Wakamatsu, Naoto Shiraki and Ryosuke Fujimoto
1562-1568 :
Interface Formation Mechanism of Cemented Carbide Dipped in Molten Cast Iron
Akihiro Shibata, Mamoru Takemura, Mitsuaki Matsumuro and Tadashi Kitsudo
1569-1575 :
Effects of Reduced Pressure and Casting Design on Mold Filling in Expendable Pattern Casting Process of Thin Wall Aluminum Alloy Castings
Sadatoshi Koroyasu
1576-1582 :
Spot Forge-Welding for Rapid Dissimilar Joining of Fe to Al to Produce an Intermetallic Compound-Free Interface
Hideki Yamagishi
1583-1588 :
Effect of Glass Composition on Sinterability of Copper Terminal Paste for Multilayer Ceramic Capacitors
Nobuo Nishioka, Yui Hosono, Sohei Sukenaga, Noritaka Saito and Kunihiko Nakashima
1589-1595 :
Advanced Electron Microscopy for Materials Science
Zentaro Akase, Mitsuaki Higo, Keiko Shimada, Takafumi Sato, Hideyuki Magara, Daisuke Shindo and Nobuhiko Ohno

[JIM HOME] [JOURNAL ARCHIVES]

© 2021 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp