Materials Transactions Online

Materials Transactions, Vol.62 No.6 (2021)

691-702 :
Current Status and Challenges for Unified Understanding of Bonding Mechanism in Solid Particle Deposition Process
Yuji Ichikawa and Kentaro Shinoda
703-710 :
Quantitative Analysis of Factors Increasing Coercive Force of Iron Powder Cores-Influence of Porosity
Takuya Takashita and Yukiko Ozaki
711-718 :
Effect of Short-Range Ordering in High-Entropy Alloys
Taichi Abe
719-725 :
Classification of Microstructures of Al-Si Casting Alloy in Different Cooling Rates with Machine Learning Technique
Zixiang Qiu, Kenjiro Sugio and Gen Sasaki
726-730 :
Effect of Pulse Parameters on the Microstructural Evolution and Properties of Jet Electrodeposited Cu-Al2O3 Nanocomposite Coating
Yangpei Zhao and Hui Fan
731-737 :
Synthesis and Analysis of Highly Monodispersed Silver Copper Sulfide Nanoparticles
Kenshiro Sato, Toshihiro Kuzuya, Yasushi Hamanaka and Shinji Hirai
738-743 :
Lock-in Infrared Thermography for Fatigue Limit Estimation in Ti-6Al-4V Alloy
Tetsuya Matsunaga, Nobuo Nagashima and Shigeaki Sugimoto
744-747 :
Effect of Thermo-Mechanical Treatment on Ductility of Cu-0.29 mass%Zr Alloy Wires
Takahiro Kunimine, Kenta Miyamoto, Kao Nakashima, Chihiro Watanabe, Ryoichi Monzen, Naokuni Muramatsu and Shinya Ueno
748-755 :
Evaluation of Electric Current-Induced Improvement of Fracture Characteristics in SUS316
Sungmin Yoon, Yasuhiro Kimura, Yi Cui, Yuhki Toku and Yang Ju
756-762 :
Influence of Aging Temperature on Metallurgy, Impact Toughness and Pitting Behavior of Flux-Cored Arc Welded 2205 Duplex Stainless Steel Joint
Yingying Zhang, Zhengjun Liu and Dongming Li
763-769 :
Analysis for the Mechanism of Accelerated Corrosion on Low Alloy Steel in Air-Solution Alternating Condition
Kyohei Otani, Takashi Tsukada and Fumiyoshi Ueno
770-773 :
Forming of Self-Sustaining Ce0.9Gd0.1O1.95 Film by Aqueous Tape Casting Method
Masakuni Ozawa and Naoki Kato
774-780 :
A Study on Evaluation Index of Cathodic Protection Effect in Port Steel Structure Based on Test Piece Survey Result
Hiroto Tado, Toru Yamaji, Atsushi Kobayashi, Yoshiyuki Kawase, Michio Yoshida and Hidenori Hamada
781-787 :
Structure of Corrosion Product Formed on Carbon Steel Covered with NiSO4-Added Resin Coating under Sulfuric Acid Mist Environment Containing Chloride
Shota Hayashida, Masamitsu Takahashi, Hiroshi Deguchi, Hiroaki Tsuchiya, Koushu Hanaki, Masato Yamashita and Shinji Fujimoto
788-796 :
Development of Electrochemical Surface Treatment for Improvement of Localized Corrosion Resistance of Zirconium in Chloride Environment
Tomoyo Manaka, Yusuke Tsutsumi, Maki Ashida, Peng Chen, Hideki Katayama and Takao Hanawa
797-806 :
Time-Resolved Measurements of Dissolution Rates of Platinum and Palladium by a Solution Flow Cell Combined with ICP-MS
Azusa Ooi, Eiji Tada and Atsushi Nishikata
807-814 :
Effect of Organic Additives on Electrodeposition Behavior of Zn from Zincate Solution Containing Potassium Hydroxide and Its Micro Structure
Kenta Fukumoto, Satoshi Oue, Tsukasa Niwa, Yoshiharu Kikuchi, Shinya Akamatsu and Hiroaki Nakano
815-820 :
Synergistic Effects of Metal Cations and Sodium Gluconate on the Inhibition of Freshwater Corrosion of Mild Steel
Kyohei Otani and Masatoshi Sakairi
821-828 :
Composition-Oxygen Partial Pressure Diagram of the Cr-B-O Ternary System Based on the Standard Gibbs Energies of Formation of CrB4, CrB2, Cr3B4, Cr5B3 and CrBO3 Determined by Solid Electrolyte
Hiroaki Yamamoto, Yoshitsugu Taniguchi, Kazuto Nishiyama, Yoshitaka Wada, Kohei Shibata, Ai Nozaki and Masao Morishita
829-835 :
Hierarchical Clustering of Structural and Electronic Characteristics Obtained from Molecular Dynamics Simulation of Catalytic Reaction on Metal Nanoparticle
Monami Tsunawaki, Satoru Fukuhara and Yasushi Shibuta
836-845 :
Fabrication of Mushroom-Like Nanostructures on Stainless Steel Surface by Combination of Heat Treatment and Electrochemical Etching
Takayoshi Yano, Shin Ishikawa and Hiroki Habazaki
846-855 :
Numerical Analysis of Peen Forming for High-Strength Aluminum Alloy Plates
Takahiro Ohta and Yoshihiro Sato
856-863 :
Fabrication of the Casting Products in Cu-Zn-Mn-Ni Medium-Entropy Brasses
Takeshi Nagase, Akihiro Shibata, Mitsuaki Matsumuro, Mamoru Takemura and Satoshi Semboshi
864-870 :
Modified Cellular Automaton Simulation of Metal Additive Manufacturing
Jun Kubo, Yuichiro Koizumi, Takuya Ishimoto and Takayoshi Nakano
871-879 :
Thermal Oxidation Behavior of Magnesium Silicide with Added Alumina or Aluminum
Yoshinobu Nakada
880-886 :
Improved Hydrogen Generation Performance via Hydrolysis of MgH2 with Nb2O5 and CeO2 Doping
Lishuai Xie, Yeqing Ding, Jiahao Ren, Teng Xie, Yaqiu Qin, Xiaomin Wang and Fei Chen
887-891 :
Coercivities of Sm-Fe-M Sintered Magnets with ThMn12-Type Structure (M = Ti, V)
Kazuki Otsuka, Masayuki Kamata, Tadao Nomura, Hiroki Iida and Hajime Nakamura
892-898 :
Numerical Investigation of Density Segregation on a Shaking Table Using the Discrete Element Method
Yuki Tsunazawa and Yoshiaki Kon
899-904 :
Structural Properties of (Ti, Zr)(Mn, Cr)2M0.1 (M = None, Fe, Co, Ni, and Cu) Hydrogen Storage Alloys: Composition Distribution and Occupied Site of Doped Element
Tessui Nakagawa, Daichi Heshiki, Hiroki Higa, Junko Kawakami, Riki Kobayashi, Nobuko Hanada, Kazutaka Ikeda, Toshiya Otomo, Hironori Ofuchi and Masayoshi Ishida
905-913 :
Recent Studies on Titanium Refining: 2017-2020
Ryosuke O. Suzuki, Shungo Natsui and Tatsuya Kikuchi

[JIM HOME] [JOURNAL ARCHIVES]

© 2021 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp