Materials Transactions Online

Materials Transactions, Vol.59 No.1 (2018)

1-13 :
Recent Progress in Research and Development of Metallic Structural Biomaterials with Mainly Focusing on Mechanical Biocompatibility
Mitsuo Niinomi
14-18 :
Proton Conduction and Incorporation into La1−xBaxYb0.5In0.5O3−δ
Yuji Okuyama, Takuya Ymaguchi, Naoki Matsunaga and Go Sakai
19-22 :
Investigation of the Electrical Properties in Indium and Yttrium-Doped Barium Zirconate Based Proton Conducting Perovskites
Young-Sung Lee, Yasuhiro Takamura, Yi-Hsuan Lee, Kwati Leonard and Hiroshige Matsumoto
23-26 :
Anisotropy of Fracture Toughness of Stabilized Zirconia Investigated by Nano-Identation Method
Hideaki Ito, Kazuhisa Sato, Atsushi Unemoto, Shin-ichi Hashimoto, Koji Amezawa and Tatsuya Kawada
27-32 :
Influence of NiO Reduction on Residual Strain in NiO/Ni-YSZ
Fumitada Iguchi, Sarana Akrasevee and Yutaro Miyoshi
33-38 :
Magnesium Doping for the Promotion of Rutile Phase Formation in the Pulsed Laser Deposition of TiO2 Thin Films
Akihiro Ishii, Itaru Oikawa, Masaaki Imura, Toshimasa Kanai and Hitoshi Takamura
39-46 :
Experimental and Numerical Simulation Analysis of the Blocking Layer in an Electromagnetic Induction-Controlled Automated Steel Teeming System
Chunyang Shi and Jicheng He
47-52 :
Glass-Transition-Like Behavior of Grain Boundaries in Nanocrystalline Gold
Terigele Xi, Takahiro Sato, Ryoma Suzuki and Hisanori Tanimoto
53-60 :
Development of High Ductility and Adequate Strength in Pure Titanium Recycled from Chips by Multi-Pass Equal Channel Angular Pressing
Peng Luo
61-65 :
Tribological Property of α- Pure Titanium Strengthened by Nitrogen Solid-Solution
Yasuhiro Yamabe, Junko Umeda, Hisashi Imai and Katsuyoshi Kondoh
66-71 :
Effect of Eutectic Behavior on Yield Stress of Mg-La-Zr Alloys
Yosuke Tamura, Hiroshi Soda and Alexander McLean
72-81 :
Factors Affecting Sand Solidification Using MICP with Pararhodobacter sp.
G.G.N.N. Amarakoon and Satoru Kawasaki
82-87 :
Effects of the Sintering Conditions on the Mechanical Properties of Titanium-Carbide-Particle-Reinforced Magnesium Nanocomposites Fabricated by Mechanical Alloying/Mechanical Milling/Spark Plasma Sintering
Shigehiro Kawamori, Yoshihumi Kawashima, Hiroshi Fujiwara, Kiyoshi Kuroda and Yukio Kasuga
88-97 :
Effective Alloying Treatment for Platinum Using Iron Chloride Vapor
Yu-ki Taninouchi and Toru H. Okabe
98-103 :
Research on Reaction between SiC and Fe2O3
Yong Hou, Guo-Hua Zhang and Kuo-Chih Chou
104-109 :
Use of KBF4-Al Mixed Powder to Produce Boron-Bearing 6063 Aluminum Alloys
Yosuke Tamura and Soichiro Suematu
110-116 :
Influence of Cooling Rate on Primary Particle and Solute Distribution in High-Speed Twin-Roll Cast Al-Mn Based Alloy Strip
Ram Song, Yohei Harada and Shinji Kumai
117-122 :
Microstructures and Mechanical Properties of Shape Memory Alloy Using Pre-Mixed TiNi Powders with TiO2 Particles
Ryoichi Soba, Yukiko Tanabe, Takayuki Yonezawa, Junko Umeda and Katsuyoshi Kondoh
123-128 :
Comparison of Tensile Properties of Bulk Nanocrystalline Ni-W Alloys Electrodeposited by Direct, Pulsed, and Pulsed-Reverse Currents
Isao Matsui and Naoki Omura
129-135 :
An Improved H2-Gas Pressure Operated LaNi5 Powder-Dispersed Polyurethane/Titanium 2-Layer Actuator with Reversible Giant and Rapid Expansion by Hydrogenation
Yoshitake Nishi, Junya Ohkawa, Michael C. Faudree, Masae Kanda, Kaori Yuse, Daniel Guyomar and Haru-Hisa Uchida
136-145 :
Quantitative Evaluation of Microstructure in Mo-Si-B-TiC Alloy Produced by Melting and Tilt Casting Methods
Sojiro Uemura, Takateru Yamamuro, Joung Wook Kim, Yasuhiro Morizono, Sadahiro Tsurekawa and Kyosuke Yoshimi
146-149 :
In-Situ Observation for Formations of Gold Micrometer-Sized Particles in Liquid Phase Using Atmospheric Scanning Electron Microscopy (ASEM)
Yasunari Matsuno, Eri Okonogi, Akihiro Yoshimura, Mari Sato and Chikara Sato

[JIM HOME] [JOURNAL ARCHIVES]

© 2018 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp