Materials Transactions Online

Materials Transactions, Vol.52 No.11 (2011)

2011-2015 :
Formation of Icosahedral Quasicrystals and 1/1 Crystal Approximants in Al-Pd-RE (RE: Rare Earth Metals) Systems
Yeong-Gi So, Takuro Yoshikawa, Fukuaki Saruhashi, Keiichi Edagawa and Ryuji Tamura
2016-2021 :
Morphology and Crystallography of Martensite Plate with Long Period Stacking Structure in Ti-Pd Shape Memory Alloy
Mitsuhiro Matsuda, Shoichiro Yano and Minoru Nishida
2022-2026 :
Formation of Nanotwins in Cold-Rolled Cu-Zn Alloy by Electric Current Pulses
Wenbin Dai, Xinli Wang, Lin Zhao and Jingkun Yu
2027-2031 :
A Bainite-Ferrite Multi-Phase Steel Strengthened by Ti-Microalloying
Jianfeng Wang, Guangqiang Li and Aida Xiao
2032-2039 :
Thermodynamic Assessment of the Bi-Mn System
Katsunari Oikawa, Yoshifuru Mitsui, Keiichi Koyama and Koichi Anzai
2040-2044 :
Elastic and Damping Properties of AZ31 Magnesium Alloy Sheet Processed by High-Temperature Rolling
Kazutaka Suzuki, Yasumasa Chino, Xinsheng Huang and Mamoru Mabuchi
2045-2051 :
Effect of Eutectic Si Particle Morphology on ECAP Formability and Mechanical Properties of AC4CH Aluminum Casting Alloys
Yoshihiro Nakayama and Tetsuya Miyazaki
2052-2060 :
Application of High-Frequency Induction Heating Apparatus to Heat Treatment of 6061 Aluminum Alloy
Fang-ni Shang, Eiji Sekiya and Yoshihiro Nakayama
2061-2066 :
Electrochemical Polishing of Metallic Titanium in Ionic Liquid
Tetsuya Uda, Kazuaki Tsuchimoto, Hidekazu Nakagawa, Kuniaki Murase, Yoshitaro Nose and Yasuhiro Awakura
2067-2070 :
Chemical Dissolution of Iridium Powder Using Alkali Fusion Followed by High-Temperature Leaching
Jaeryeong Lee and Youngjin Kim
2071-2076 :
Separation of Pt(IV) and Rh(III) from Chloride Solution by Solvent Extraction with Amine and Neutral Extractants
P. P. Sun, J. Y. Lee and M. S. Lee
2077-2082 :
Effect of Organic Additives on the Hardness of Ni Electrodeposited from Sulfamate and Watt's Solutions
Hiroaki Nakano, Hideaki Tsuji, Satoshi Oue, Hisaaki Fukushima, Feng Yang and Wenhuai Tian
2083-2090 :
Influence of Colour Filter on Reaction Products from Mo and W Heated to 2000°C by Concentrated Solar Beam in N2 Gas Environment in a Solar Furnace at PROMES-CNRS
Gilles Peraudeau, Fernando Almeida Costa Oliveira, Luís Guerra Rosa, Bernard Granier, Jorge Cruz Fernandes, Teresa Magalhães and Nobumitsu Shohoji
2091-2097 :
Application of Microwaves for Nondestructive and High-Efficiency Detection of Wall Thinning Locations in a Long-Distance Metal Pipe
Linsheng Liu, Yang Ju, Mingji Chen and Daining Fang
2098-2105 :
Mechanism for Densification of Yttria-Stabilized Tetragonal Zirconia Powder by Electric Current-Activated/Assisted Sintering
Tatsuo Kumagai
2106-2110 :
The Effect of Fillers in Nonconductive Adhesive on the Reliability of Chip-on-Glass Bonding with Sn/Cu Bumps
Byeung Gee Kim, Sun-Chul Kim, Wen-Guo Dong and Young-Ho Kim
2111-2118 :
The Role of Eutectic Phase and Acicular Primary Crystallized Zn Phase on Electrification-Fusion Induced Fracture of Sn-xZn Solder Alloys
Gong-An Lan, Truan-Sheng Lui and Li-Hui Chen
2119-2125 :
Hydrothermal Synthesis of Sodium and Potassium Niobates Fine Particles and Their Application to Lead-Free Piezoelectric Material
Kiyoshi Kanie, Yoshiki Numamoto, Shintaro Tsukamoto, Hirofumi Takahashi, Hideto Mizutani, Atsuki Terabe, Masafumi Nakaya, Junji Tani and Atsushi Muramatsu
2126-2130 :
A Phase Field Model of Surface-Energy-Driven Abnormal Grain Growth in Thin Films
Jie Deng and Srujan Rokkam
2131-2136 :
Investigation of Mechanical Properties and Elongated Ni Grain Growth in an Al2O3-Ni Composite during Low-Energy Ball Milling
Dong-guk Cho, Seung-Kyu Yang, Jai-Sung Lee and Caroline Sunyong Lee


© 2011 The Japan Institute of Metals
Comments to us :