Materials Transactions Online

Materials Transactions, Vol.49 No.4 (2008)

693-697 :
Electrical Percolation during Codeposition of Fe and Si Clusters by a Dual Source PGCCD System
Nobuyuki Shinohara, Ryoji Katoh and Kenji Sumiyama
698-703 :
Microstructural Changes at the Ultra-Precision Raster Milled Surface of Zn-Al Based Alloy
S. To, Y. H. Zhu and W. B. Lee
704-709 :
Parallel Computer Simulation of Three-Dimensional Grain Growth Using the Multi-Phase-Field Model
Yoshihiro Suwa, Yoshiyuki Saito and Hidehiro Onodera
710-714 :
Analyses on Compression Twins in Magnesium
L. Meng, P. Yang, Q. Xie and W. Mao
715-722 :
Influence of Temperature Dependence of Solubility on Kinetics for Reactive Diffusion in a Hypothetical Binary System
Masanori Kajihara
723-727 :
Direct Evidence of Polycrystalline Silicon Thin Films Formation during Aluminum Induced Crystallization by In-Situ Heating TEM Observation
Seiichiro Ii, Takeshi Hirota, Kensuke Fujimoto, Youhei Sugimoto, Naoki Takata, Ken-ichi Ikeda, Hideharu Nakashima and Hiroshi Nakashima
728-732 :
Quantitative Analysis of Aluminum Dross by the Rietveld Method
A. Gómez, N. B. Lima and J. A. Tenório
733-736 :
A New Approach to Predict the Thermal Conductivity of Composites with Coated Spherical Fillers and Imperfect Interface
Yong Kuk Park, Jae-Kon Lee and Jin-Gon Kim
737-745 :
Tensile Properties of Forged Direct-Squeeze-Cast Al-(6.0∼8.0 mass%)Si-(0.3∼0.52 mass%)Mg Alloy
Teng-Shih Shih, Po-Chen Chen and Wei-Shian Tsai
746-753 :
Fusion Zone Microstructure Evolution of Al-Alloyed TRIP Steel in Diode Laser Welding
Mingsheng Xia, Zhiling Tian, Lin Zhao and Y. Norman. Zhou
754-759 :
Hydrogen Permeation of Thin Pd-25Ag Membranes Prepared by Cold Rolling and Microsystem Technology
Yi Zhang, Jian Lu, Ryutaro Maeda and Chikashi Nishimura
760-765 :
Disbonding in Joint of Carbon to Nickel
Tomoyuki Nishida
766-773 :
Numerical Study of Fluid Flow Behaviors in an Alkali-Free Glass Melting Furnace
Chien-Chih Yen and Weng-Sing Hwang
774-781 :
Reliability of Laser Welding Process for ZE41A-T5 Magnesium Alloy Sand Castings
Haider Al-Kazzaz, Xinjin Cao, Mohammad Jahazi and Mamoun Medraj
782-786 :
Quantitative Evaluation of Porosity in Aluminum Die Castings by Fractal Analysis of Perimeter
Yoshihiko Hangai and Soichiro Kitahara
787-791 :
Analysis of Uniaxial Alignment Behavior of Nonmagnetic Materials under Static Magnetic Field with Sample Rotation
Jun Akiyama, Hidefumi Asano, Kazuhiko Iwai and Shigeo Asai
792-799 :
Diffusion and γ' Phase Coarsening Kinetics in Ruthenium Containing Nickel Based Alloys
Efendi Mabruri, Shingo Sakurai, Yoshinori Murata, Toshiyuki Koyama and Masahiko Morinaga
800-804 :
Machinability of Experimental Ti-Cu Alloys
Masafumi Kikuchi, Masatoshi Takahashi and Osamu Okuno
805-811 :
Active Hydroxyl Groups on Surface Oxide Film of Titanium, 316L Stainless Steel, and Cobalt-Chromium-Molybdenum Alloy and Its Effect on the Immobilization of Poly(Ethylene Glycol)
Yuta Tanaka, Haruka Saito, Yusuke Tsutsumi, Hisashi Doi, Hachiro Imai and Takao Hanawa
812-816 :
AFM Observation of Microstructural Changes in Fe-Mn-Si-Al Shape Memory Alloy
Motomichi Koyama, Masato Murakami, Kazuyuki Ogawa, Takehiko Kikuchi and Takahiro Sawaguchi
817-823 :
Effects of Heat Treatment and Hot Forging on Microstructure and Mechanical Properties of Co-Cr-Mo Alloy for Surgical Implants
Yoshimitsu Okazaki
824-828 :
Synthesis of Spinel-Type Magnesium Cobalt Oxide and Its Electrical Conductivity
Natsumi Kamioka, Tetsu Ichitsubo, Tetsuya Uda, Susumu Imashuku, Yu-ki Taninouchi and Eiichiro Matsubara
829-834 :
Reduction of Functionally Graded Material Layers for Si3N4-Al2O3 System Using Three-Dimensional Finite Element Modeling
Jae Chul Lee, Jong Ha Park, Sae Hee Ryu, Hyun Jung Hong, Doh Hyung Riu, Sung Hoon Ahn and Caroline Sunyong Lee
835-844 :
Removal of Arsenate in Acid Mine Drainage by a Permeable Reactive Barrier Bearing Granulated Blast Furnace Slag: Column Study
Keiko Sasaki, Shunsuke Nukina, Wahyu Wilopo and Tsuyoshi Hirajima
845-849 :
Optimum pH for Oxidation of Mn(II) Ions in Model and Actual Manganese Drainages by a Mn-Oxidizing Fungus, Phoma sp. Strain KY-1
Keiko Sasaki, Hideki Tachibana, Yuuki Ogawa and Hidetaka Konno
850-853 :
Effects of Aging Treatment on the Bending Strength in AZ91D/Al18B4O33w Composite
W. G. Wang, W. L. Li, K. C. Chang, K. Matsugi and G. Sasaki
854-859 :
Thermodynamic Interactions of Nb and Mo on Ti in Liquid Iron
Tae-In Chung, Joong-Beom Lee, Jin-Goo Kang, Jong-Oh Jo, Bo-Ho Kim and Jong-Jin Pak
860-868 :
The Effect of Temperature on Microstructure, Magnetic Properties and Reaction Kinetics of Ni0.5Co0.5Fe2O4 Reduction in Hydrogen Atmosphere
M. Bahgat, Min-Kyu Paek and Jong-Jin Pak
869-873 :
Phase Transition of Shock-Loaded ZrTiCuNiBe Bulk Metallic Glass under Continuous Heating
Chao Yang, Weiping Chen, Zaiji Zhan, Mindan Chen, Junyi Yang, Liang Guo, Xinyu Zhang, Riping Liu and Wenkui Wang
874-878 :
Laser Raman Spectroscopic Study on Magnetite Formation in Magnetotactic Bacteria
Shingo Watanabe, Masaharu Yamanaka, Akira Sakai, Ken Sawada and Tatsuo Iwasa
879-884 :
Microstructural Control of the TiO2-SnO2 Binary System and Synthesis of SnO2 Nanowhiskers by Microwave Irradiation
Takuya Aoyagi, Yamato Hayashi and Hirotsugu Takizawa
885-888 :
Microstructures and Mechanical Properties of Double-Friction Stir Welded 2219 Al Alloy
Chang-Yong Lee, Don-Hyun Choi, Won-Bae Lee, Sun-Kyu Park, Yun-Mo Yeon and Seung-Boo Jung
889-891 :
Equal Channel Angular Extrued Bi0.5Sb1.5Te3 Thermoelectric Compound
CheolHo Lim, KyungTaek Kim, YongHwan Kim, ChangHun Lee and ChiHwan Lee


© 2008 The Japan Institute of Metals
Comments to us :