Materials Transactions Online

Materials Transactions, Vol.59 No.5 (2018)

699-705 :
Preparation and Compressive Performance of an A356 Matrix Syntactic Foam
Ningzhen Wang, Xiang Chen, Yanxiang Li, Yuan Liu, Huawei Zhang and Xiong Wang
706-711 :
Molecular Dynamics Investigation of the Effect of Lanthanum on the Diffusivity of Niobium in Austenite
Haiyan Wang, Zhaofeng Yao, Xueyun Gao, Peng Cui and Huiping Ren
712-716 :
Martensitic Transformation of Retained Austenite in Ferrite Matrix for Low Alloy Steel
Takayuki Yamashita, Norimitsu Koga and Osamu Umezawa
717-723 :
Effect of Ag Addition to Zn22 mass%Al-2 mass%Cu Alloy on the Four-Phase Reaction η + ε → α + τ′
H.J. Dorantes-Rosales, V.M. López-Hirata, Felipe Hernández-Santiago, M.L. Saucedo-Muñoz and Ana María Paniagua-Mercado
724-729 :
Microstructures and Properties of Al-27%Si Composites: Influence of Rolling and Annealing
Jiaji Ma, Yilong Dai, Xiangchun Xu, Xuemei Xu, Hongjie Fang, Hui Liu, Yu Zhang and Kun Yu
730-733 :
Age Heat Treatment of the CoCrFeNiTi0.3 High-Entropy Alloy
Tao-Tsung Shun, Cheng-Ying Hsieh, Wei-Jhe Hung and Che-Fu Lee
734-740 :
Effect of Heat Treatment within Alpha/Beta Dual-Phase Field on the Structure and Tensile Properties of Binary Ti-Mo Alloys
Yu-Po Peng, Chien-Ping Ju and Jiin-Huey Chern Lin
741-746 :
New Mg-V-Cr BCC Alloys Synthesized by High-Pressure Torsion and Ball Milling
Keisuke Fujiwara, Ryoko Uehiro, Kaveh Edalati, Hai-Wen Li, Ricardo Floriano, Etsuo Akiba and Zenji Horita
747-753 :
Modeling of Complete Stress-Strain Curves and Time-Dependent Behaviors of Rocks under Uniaxial Tension
Kimihiro Hashiba, Katsunori Fukui and Minami Kataoka
754-759 :
Lifetime in Steel Cord Wire Drawing Dies of WC-Co Cemented Carbide Containing TaNbC or Cr3C2
Masayuki Takada, Hideaki Matsubara and Yoshihiro Kawagishi
760-763 :
Strength and Microstructure of Copper Tube in Cross-Roll Straightening
Hirokazu Tamagawa
764-770 :
Effects of Doping Nano-La2O3 on the Microstructure and Mechanical Properties of Mo-9Si-18B Alloys
Liangbin Chen, Ran Wei, Ke Tang, Guojun Zhang, Feng Jiang and Jun Sun
771-778 :
Deformation Microstructure Developed by Nanoindentation of a MAX Phase Ti2AlC
Yusuke Wada, Nobuaki Sekido, Takahito Ohmura and Kyosuke Yoshimi
779-786 :
Corrosion Behavior of Sn-Bearing Steel under Wet/Dry Cyclic Environments Containing Cl
Kiyonobu Sugae, Takayuki Kamimura, Hideaki Miyuki and Takeo Kudo
787-792 :
Selective Leaching and Surface Properties of Cu-Al-Ni Shape Memory Alloys
Shih-Hang Chang, Chin Kuo and Jin-Lin Han
793-798 :
Preparation of Copper-Based Superhydrophobic Surfaces by Jet-Electrodeposition
Chen Jinsong, Guo Jian, Qiu Mingbo, Yang Jianming, Huang Dazhi, Wang Xiaoli and Ding Yunfei
799-804 :
Evaluation of Wrinkling States Using In-Process Ultrasonic Examination during Sheet Metal Forming
Ryota Kakinoki, Yuji Segawa, Yasuo Marumo, Yasuhiro Imamura, Tomohiro Nonaka and Yutaka Sakata
805-810 :
Effect of Shape Memory Heat Treatment on Microstructures and Mechanical Properties of Powder Metallurgy TiNi Shape Memory Alloy
Ryoichi Soba, Yukiko Tanabe, Takayuki Yonezawa, Junko Umeda and Katsuyoshi Kondoh
811-815 :
Comparison of the Photocatalytic Efficience for Cu and N Co-Doped TiO2 by Sol-Gel and Xerogel-Hydrothermal Methods
Cuiping Liu, Zhifeng Liu and Yuwen Zhu
816-821 :
A Novel Directional Solidification of TiAl-Based Alloys by Electromagnetic Cold Crucible Zone Melting Technology with Y2O3 Moulds
Hailong Zhang, Hongsheng Ding, Ruirun Chen, Qiang Wang, Jingjie Guo and Hengzhi Fu
822-828 :
Grain Boundary Segregation and Precipitation during the Plastic Deformation of 30Cr2Ni4MoV Steel
Wen Long Zhao, Dong Po Wang, Hua Dong Wang, Shi Cheng Ma, Yu Yi Wang and Yue Qian Zhang
829-834 :
Fabrication and Mechanical Properties of Textured Ti3SiC2 Systems Using Commercial Powder
Yuichi Uchida, Koji Morita, Tohru S. Suzuki, Toshiyuki Nishimura, Kenjiro Fujimoto and Yoshio Sakka
835-842 :
Heat-Conduction-Type and Keyhole-Type Laser Welding of Ti-Ni Shape-Memory Alloys Processed by Spark-Plasma Sintering
Abdollah Bahador, Esah Hamzah, Katsuyoshi Kondoh, Seiichiro Tsutsumi, Junko Umeda, Tuty Asma Abu Bakar and Farazila Yusof
843-849 :
Scorodite Synthesis in As(V)-Containing Fe(II) Solution in the Presence of Hematite as a Fe(III) Source
Atsushi Iizuka, Kozo Shinoda and Etsuro Shibata
850-854 :
The Use of Methyl Ethyl Ketone in Nitric Acid Leaching Processes for Enhancement of Ag Recovery from Used X-ray Films
Hyeonji Jo, Kyoungkeun Yoo, Soo-kyung Kim and Richard Diaz Alorro
855-857 :
Hydrogen Desorption Isobar Properties of Ti1.1CrMn at High Temperatures and Pressures
Nobuhito Tsurui, Kiyotaka Goshome, Satoshi Hino, Naruki Endo, Tetsuhiko Maeda, Hiroki Miyaoka and Takayuki Ichikawa
858-860 :
Low Young’s Modulus Ti-Nb-O with High Strength and Good Plasticity
Qiang Li, Dong Ma, Junjie Li, Mitsuo Niinomi, Masaaki Nakai, Yuichiro Koizumi, Daixiu Wei, Tomoyuki Kakeshita, Takayoshi Nakano, Akihiko Chiba, Kai Zhou and Deng Pan

[JIM HOME] [JOURNAL ARCHIVES]

© 2018 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp