Materials Transactions Online

Materials Transactions, Vol.58 No.5 (2017)

705-710 :
Performance of Alkali-Resistant Glass Fibers Modified with Refused Coal Ore
Ji-Sun Lee, MiJai Lee, Tae-Young Lim, Youngjin Lee, Dae-Woo Jeon, Soong-Keun Hyun and Jin-Ho Kim
711-715 :
Microstructure and Mechanical Properties of Friction-Welded A6063 and A2017 Alloys
Eun Hye Kim, Kazuhiro Nakata and Kuk Hyun Song
716-719 :
Temperature Dependence of the Magnetic Hysteresis Curves in Magnetic Multilayers
M. Yoneda, S. Obata, M. Niwa and M. Motohashi
720-723 :
Enhancement of the Phase Formation Rate during In-Field Solid-Phase Reactive Sintering of Mn-Bi
Daiki Miyazaki, Yoshifuru Mitsui, Rie Y. Umetsu, Kohki Takahashi, Satoshi Uda and Keiichi Koyama
724-727 :
Enhanced Hydrogen Generation Properties of Al-Ga-In-Sn Alloy in Reaction with Water by Trace Amount of AlTi5B Additives
Zhixiong Xie, Shijie Dong, Ping Luo and Huihu Wang
728-733 :
Improvement of Strength-Elongation Balance of Al-Mg-Si Sheet Alloy by Utilising Mg-Si Cluster and Its Proposed Mechanism
Ken Takata, Kohsaku Ushioda, Ryutaro Akiyoshi, Ken-ichi Ikeda, Jun Takahashi, Satoshi Hata and Kenji Kaneko
734-738 :
Effect of TiB2 on Microstructure of 7075 Al Alloy Semi-Solid Slurry at Different Solid Fraction
Guisheng Gan, Chunhong Zhang, Donghua Yang, Mingbo Yang, Xin Jiang and Yun-long Shi
739-748 :
Ion Species/Energy Dependence of Irradiation-Induced Lattice Structure Transformation and Surface Hardness of Ni3Nb and Ni3Ta Intermetallic Compounds
H. Kojima, Y. Kaneno, M. Ochi, S. Semboshi, F. Hori, Y. Saitoh, N. Ishikawa, Y. Okamoto and A. Iwase
749-756 :
Evaluation of Ion-Irradiation Hardening of Tungsten Single Crystals by Nanoindentation Technique Considering Material Pile-Up Effect
Eva Hasenhuetl, Ryuta Kasada, Zhexian Zhang, Kiyohiro Yabuuchi, Yen-Jui Huang and Akihiko Kimura
757-760 :
Effect of Shot Peening on Mechanical Behavior of Zr-Based Bulk Metallic Glasses under Monotonic and Cyclic Loading Mode
Ran Wei, Liangbin Chen, Juan Tao, Shuai Guo, Zhenhua Han and Fushan Li
761-767 :
Electrolysis Oxidation of Chalcopyrite and Molybdenite for Selective Flotation
Hajime Miki, Hidekazu Matsuoka, Tsuyoshi Hirajima, Gde Pandhe Wisnu Suyantara and Keiko Sasaki
768-775 :
Mechanism of Intergranular Corrosion of Brazed Al-Mn-Cu Alloys with Various Si Content
Michihide Yoshino, Shohei Iwao, Masakazu Edo and Hajime Chiba
776-781 :
Hydrogenation of Propyne Verifying the Harmony in Surface and Bulk Compositions for Fe-Ni Alloy Nanoparticles
Takayuki Kojima, Shun Fujieda, Genichiro Kato, Satoshi Kameoka, Shigeru Suzuki and An-Pang Tsai
782-789 :
The Application of Etched Aluminum Wires as Catalyst Supports for Methanol Steam-Reforming
Hiromi Hiramatsu, Makoto Sakurai and Hideo Kameyama
790-794 :
Effect of Sodium Carbonate on Phase Transformation of High-Magnesium Laterite Ore
Shiwei Zhou, Jingcheng Dong, Chao Lu, Bo Li, Fan Li, Bing Zhang, Hua Wang and Yonggang Wei
795-798 :
Electrocapillary Deformation and Electric Voltage Induced Flow of Liquid Wood Alloy in NaOH Aqueous Solution
Qiaoli Lin and Guodi Zhang
799-805 :
Thermal and Mechanical Properties of Commercial-Purity Aluminum Fabricated Using Selective Laser Melting
Takahiro Kimura and Takayuki Nakamoto
806-812 :
Deposition of DLC Films onto Oxynitriding-Treated V4E High Vanadium Tool Steel through DC-Pulsed PECVD Process
Shih-Hsien Chang, Wei-Chen Wu, Kuo-Tsung Huang and Chung-Ming Liu
813-816 :
Effect of Bias Sputtering on Magnetostrictive Property of Sm-Fe Thin Film
Shota Sakano and Yoshihito Matsumura
817-824 :
Morphology Evolution of γ′ Precipitates during Isothermal Exposure in Wrought Ni-Based Superalloy Inconel X-750
Hiromu Hisazawa, Yoshihiro Terada and Masao Takeyama
825-828 :
Improvement of Coercivity of Nd-Fe-B Powder by Nd-Cu Sputtering
Ami Iijima, Masashi Matsuura, Nobuki Tezuka, Satoshi Sugimoto, Yasuhiro Une, Hirokazu Kubo and Masato Sagawa
829-833 :
Recovery of Silver from the Nitrate Leaching Solution of a Spent Ag/α-Al2O3 Catalyst by Solvent Extraction and Reduction
Pan-Pan Sun, Bong-Jo Rho and Sung-Yong Cho
834-837 :
Manufacturing of Carbon Nanotube Preform with High Porosity and Its Application in Metal Matrix Composites
Yongbum Choi, Zhefeng Zu, Kazuhiro Matsugi, Kenjiro Sugio and Gen Sasaki
838-841 :
EBSD Observation of Pure Iron with Near-Cube Orientation Fabricated by Cold Rolling and Annealing
Daisuke Okai, Masatoshi Yae, Atsushi Yamamoto and Toshiya Doi
842-844 :
Properties and Morphologies of Epoxy Resin Based Composites Reinforced by Polyurethane and Graphene Oxide
Bin Chen, Jijun Tang, Gaitong Zhang, Suqin Chen and Jing Zhang
845-845 :
Erratum

[JIM HOME] [JOURNAL ARCHIVES]

© 2017 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp