Materials Transactions Online

Materials Transactions, Vol.58 No.3 (2017)

305-305 :
PREFACE
Ryosuke O. Suzuki
306-312 :
Aspects of the Application of Electrochemistry to the Extraction of Titanium and Its Applications
Derek Fray and Carsten Schwandt
313-318 :
Design, Test and Theoretical Assessments for Reduction of Titanium Oxide to Produce Titanium in Molten Salt
K. Ono, T.H. Okabe and R.O. Suzuki
319-321 :
Titanium Sponge Production Method by Kroll Process at OTC
Kotaro Nakamura, Takahiro Iida, Nobuo Nakamura and Tadao Araike
322-325 :
Effect of the Changed Electrolytic Cell on the Current Efficiency in FFC Cambridge Process
Meilong Hu, Qu Zhengfeng, Bai Chenguang, Di Hu and George Z. Chen
326-330 :
Electrochemical Preparation of Porous Ti-13Zr-13Nb Alloy and It's Corrosion Behavior in Ringer's Solution
Tang Yu, Huayi Yin, Yi Zhou, Yining Wang, Hua Zhu and Dihua Wang
331-340 :
Direct Extraction of Titanium Alloys/Composites from Titanium Compounds Ores in Molten CaCl2
Xingli Zou, Shangshu Li, Xionggang Lu, Qian Xu, Chaoyi Chen, Shuqiang Guo and Zhongfu Zhou
341-349 :
Reduction of CaTiO3 in Molten CaCl2 - as Basic Understanding of Electrolysis
Ryosuke O. Suzuki, Hiromi Noguchi, Hiromasa Hada, Shungo Natsui and Tatsuya Kikuchi
350-354 :
Dissolution of Calcium Titanate in Calcium Chloride Melt and Its Application to Titanium Electrolysis
Toshihide Takenaka, Kakeru Shimokawa, Kazuyoshi Nishikawa, Haruka Okada and Taiki Morishige
355-360 :
Hydrogen Assisted Magnesiothermic Reduction (HAMR) of Commercial TiO2 to Produce Titanium Powder with Controlled Morphology and Particle Size
Yang Xia, Z. Zak Fang, Ying Zhang, Hyrum Lefler, Tuoyang Zhang, Pei Sun and Zhe Huang
361-366 :
Reduction of Titanium Dioxide to Metallic Titanium by Nitridization and Thermal Decomposition
Ichiro Seki and Shin-ichi Yamaura
367-370 :
Calcium Reduction of TiS2 in CaCl2 Melt
N. Suzuki, M. Tanaka, H. Noguchi, S. Natsui, T. Kikuchi and R. O. Suzuki
371-376 :
Electrolytic reduction of V3S4 in molten CaCl2
Takahiro Matsuzaki, Shungo Natsui, Tatsuya Kikuchi and Ryosuke O. Suzuki
377-382 :
Electrochemical and Chemical Behaviors of Titanium in AlCl3-BMIC Melt
Cunying Xu, Yawei Liu, Yixin Hua, Jian Li and Qibo Zhang
383-389 :
Molten Salt Synthesis of Different Ionic Radii Metallic Compounds Doped Lithium Titanate Used in Li-Ion Battery Anodes
Qingjun Guo, Qiang Wang, Gang Chen, Miao Shen and Bing Li
390-394 :
Electrodeposition of Titanium in a Water-Soluble KF-KCl Molten Salt
Yutaro Norikawa, Kouji Yasuda and Toshiyuki Nohira
395-399 :
The Effects of NdF2 on Current Efficiency of Nd Extraction from NdF3-LiF-Nd2O3 Melts
Xiaolong Liu, Chao Huang and Bing Li
400-405 :
Electrochemical Recovery of Rare Earth Elements from Magnets: Conversion of Rare Earth Based Metals into Rare Earth Fluorides in Molten Salts
Aida Abbasalizadeh, Annelies Malfliet, Seshadri Seetharaman, Jilt Sietsma and Yongxiang Yang
406-409 :
Electrochemical Behaviour of Dissolved Titanium Oxides during Aluminium Deposition from Molten Fluoride Electrolytes
Geir Martin Haarberg
410-419 :
Recovery of Platinum Group Metals from Spent Catalysts Using Electroless Nickel Plating and Magnetic Separation
Yu-ki Taninouchi, Tetsuo Watanabe and Toru H. Okabe
420-422 :
Effect of Cooling Rate on the Microstructure of Colloidal Glass
Yongzhe Wang, Lidan Qu, Hongge Li, Hao Zhang, Yilin Wang and Yunzhuo Lu
423-426 :
Plasticity Improvement of Zr-Based Bulk Metallic Glasses by Adjusting Oxygen Content and Cooling Rate
Z.J. Ma, S.B. Lei, Lugee T. Li Yeung, P. Wang, Y.C. Guo, Z. Yang, J.P. Li and P.H. Gao
427-432 :
A Theoretical Study on Atomic Motion during Twinning for Magnesium
Jiejun He and Lushu Wu
433-441 :
Surface Morphology Analysis Using Fractal Theory in Micro Electrical Discharge Machining
Wujun Feng, Xuyang Chu, Yongqiang Hong and Daxiang Deng
442-449 :
Deformation Microstructure and Fracture Behavior in Creep-Exposed Alloy 617
Shigeto Yamasaki, Masatoshi Mitsuhara and Hideharu Nakashima
450-452 :
Reassessment of Solid Solubilities and Thermodynamic Properties of Magnesium and Calcium in Silicon
Sakiko Kawanishi and Takeshi Yoshikawa
453-456 :
Conductive Atomic Force Microscopy Measurements of Localized over Dark Current along Pyramidal Ridge Lines of Intrinsic Hydrogenated Amorphous Silicon Layer on Textured Crystalline
Hiroyuki Miwa, Satoshi Nishida, Masato Kanematsu, Shizuma Kuribayashi, Htay Win, Norimitsu Yoshida and Shuichi Nonomura
457-464 :
Adhesive Force of Laminations of Titanium Untreated and Polycarbonate Homogeneously Irradiated by Low Potential Electron Beam Prior to Assembly and Hot-Press
Masataka Tomizawa, Michael C. Faudree, Chisato Kubo, Masae Kanda, Itaru Jimbo and Yoshitake Nishi
465-470 :
Effect of the Added Polyethylene Glycol Molecular Weight and Calcination Heating Rate on the Morphology of TiO2 Films Formed by Sol-Gel
Kumpon Leelaruedee, Patama Visuttipitukul and Niti Yongvanich
471-478 :
Effects of As Cast Holes on Cooling Patterns in Directional Solidification of Plate Castings
Ikuzo Goto and Setsuo Aso
479-484 :
Improvement of Calculation Stability for Slow Fluid Flow Analysis Using Particle Method
Naoya Hirata and Koichi Anzai
485-493 :
Outflow Liquid Falling Position Control Considering Lower Pouring Mouth Position with Collision Avoidance for Tilting-Type Automatic Pouring Machine
Atsushi Ito, Yoshiyuki Noda, Ryosuke Tasaki and Kazuhiko Terashima
494-498 :
Design and Fabrication of Wire Grid Polarizer by Nanoimprinting and Glancing Angle Deposition Processes
Hyungjun Jang, Ga-Young Shin, Ho-Young Jang, Jonghyun Ju, Jiseok Lim and Seok-min Kim
499-504 :
A “Mold Filling” Model from Viscosity Measurements in a Strengthened Injection-Molded Reduced Glass Fiber Length Polyester Bulk Molding Compound
Michael C. Faudree, Yoshitake Nishi, Takashi Asaka and Michael Gruskiewicz
505-508 :
The Synthesis, Characterization and Optical Properties of Nanocrystallined Cerium Dioxide by the Hydrothermal Method
I-Tsan Liu, Min-Hsiung Hon and Lay Gaik Teoh
509-512 :
Effects of Growth Conditions on AlN Layer Grown by Ga-Al Liquid Phase Epitaxy
Masayoshi Adachi, Ryuta Sekiya and Hiroyuki Fukuyama
513-519 :
Anisotropic Analysis of Nanocrystalline Bismuth Telluride Thin Films Treated by Homogeneous Electron Beam Irradiation
Shohei Kudo, Saburo Tanaka, Koji Miyazaki, Yoshitake Nishi and Masayuki Takashiri
520-523 :
Enhanced Wear Resistance of Zr-Based Bulk Metallic Glass by Thermal Oxidation Treatment
Kun Zhou, Shujie Pang, Chen Chen, Ying Liu, Wei Yang and Tao Zhang

[JIM HOME] [JOURNAL ARCHIVES]

© 2017 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp