Materials Transactions Online

Materials Transactions, Vol.57 No.11 (2016)

1859-1867 :
Influence of Particle Shape on Microstructure and Magnetic Properties of Iron Powder Cores
Takuya Takashita, Naomichi Nakamura and Yukiko Ozaki
1868-1871 :
Stress-Induced α″ Martensitic Transformation Mechanism in Deformation Twinning of Metastable β-Type Ti-27Nb-0.5Ge Alloy under Tension
Byoung-Soo Lee, Yong-Deok Im, Hyung-Giun Kim, Kyung-Hoon Kim, Won-Yong Kim and Sung-Hwan Lim
1872-1879 :
Development of Small-Scale Impact Three-Point Bending Test Apparatus and Evaluation of Impact Fracture Properties of Mg-6%Al-1%Zn-2%Ca Alloy
Takayuki Hase, Tomoaki Kawa, Naoko Ikeo and Toshiji Mukai
1880-1886 :
Effects of Strain-Rate and Temperature on Mechanical Properties of Hot-Rolled Mg-14.3Li-0.8Zn β-Phase Alloy
S. K. Wu, C. Chien and C. S. Yang
1887-1896 :
Optimization of Microstructure and Mechanical Properties of Co-Cr-Mo Alloys by High-Pressure Torsion and Subsequent Short Annealing
Murat Isik, Mitsuo Niinomi, Huihong Liu, Ken Cho, Masaaki Nakai, Zenji Horita, Takayuki Narushima and Kyosuke Ueda
1897-1901 :
Deformation Behavior of Pure Cu and Cu-Ni-Si Alloy Evaluated by Micro-Tensile Testing
Sari Yanagida, Akiyoshi Araki, Tso-Fu Mark Chang, Chun-Yi Chen, Takashi Nagoshi, Equo Kobayashi, Hideki Hosoda, Tatsuo Sato and Masato Sone
1902-1907 :
Effect of Zr on Microstructure and Oxidation Behavior of α and α + α2 Ti-Al-Nb Alloys
Sae Matsunaga, Ai Serizawa and Yoko Yamabe-Mitarai
1908-1914 :
Electrodeposition Behavior of Zn-Ni Alloys Produced from Sulfate Solutions at High Current Densities
Satoru Ando
1915-1921 :
Improving Impact Value of Interlayered Glass Fiber Chopped Strand Mat Reinforced Thermoplastic Polypropylene Externally Irradiated by Homogeneous Low Potential Electron Beam
Ryo Nomura, Masae Kanda, Michael C. Faudree, Itaru Jimbo and Yoshitake Nishi
1922-1929 :
Optimization of the Electrochemical Acceleration for Actual Corrosion Behavior of Hot-Dip Aluminized Ferritic Stainless Steel in NaCl Solution
Seok-Ho Woo, Sol-Ji Song, Min-Jun Kim and Jung-Gu Kim
1930-1935 :
Development of Real-Time Weight Monitoring System for the Carbothermic Reduction Process of Silica
Rabie Benioub, Abderahmane Boucetta, Amina Chahtou, Sidi Mohammed Heddadj, Mohamed Adnane, Yasubumi Furuya and Kenji Itaka
1936-1944 :
Optimization of the Granulation Binders of High-Purity Carbothermic Reduction for Solar-Grade Silicon
Abderahmane Boucetta, Rabie Benioub, Amina Chahtou, Sidi Mohammed Heddadj, Takuya Ogasawara, Yasubumi Furuya, Saad Hamzaoui and Kenji Itaka
1945-1951 :
Effect of Nitrogen on the Microstructure and Hardness of High-Carbon High-Speed Tool Steel Type Alloys
Ryutaro Hara, Masahiro Yamamoto, Gen Ito, Kazunori Kamimiyada, Ichihito Narita and Hirofumi Miyahara
1952-1959 :
Densification Behavior of 316L Stainless Steel Parts Fabricated by Selective Laser Melting by Variation in Laser Energy Density
Joon-Phil Choi, Gi-Hun Shin, Mathieu Brochu, Yong-Jin Kim, Sang-Sun Yang, Kyung-Tae Kim, Dong-Yeol Yang, Chang-Woo Lee and Ji-Hun Yu
1960-1965 :
Effects of Grain Boundary Phase on Coercivity of Dysprosium-Free Rare Earth Magnet
Yasushi Enokido, Masashi Miwa, Syota Goto and Yoshinori Fujikawa
1966-1971 :
Effect of Corrosion on Mechanical Reliability of Sn-Ag Flip-Chip Solder Joint
Sang Su Ha, Hanbyul Kang, Gun Rae Kim, Sangwoo Pae and Haebum Lee
1972-1976 :
Electrochemical Dissolution of Platinum and Ruthenium from Membrane Electrode Assemblies of Polymer Electrolyte Fuel Cells
Shohei Kanamura and Motoshige Yagyu
1977-1977 :
Erratum

[JIM HOME] [JOURNAL ARCHIVES]

© 2016 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp