Materials Transactions Online

Materials Transactions, Vol.56 No.3 (2015)

277-280 :
Formation of MgAl2O4 at Al/MgO Interface
Lin Yang, Mingxu Xia, Nadendla Hari Babu and Jianguo Li
281-287 :
On the Periodicity of 〈001〉 Symmetrical Tilt Grain Boundaries
Kazutoshi Inoue, Mitsuhiro Saito, Zhongchang Wang, Motoko Kotani and Yuichi Ikuhara
288-291 :
Improvement of Magnetic and Dielectric Properties of BaFeO3−δ Thin Films by Sn Substitution
Ryoichi Shinoda, Akihiro Iwase and Toshiyuki Matsui
292-296 :
Electric and Magnetic Evolutions in Composite Assemblies of Fe and Si Nano-Particles
Kenji Sumiyama, Minoru Yamazaki, Yuichiro Kurokawa, Nobuyuki Shinohara and Takehiko Hihara
297-302 :
Precipitation Behavior and Properties of Cu-Ti Alloys with Added Nitrogen
Jun Ikeda, Satoshi Semboshi, Akihiro Iwase, Weilin Gao and Akira Sugawara
303-312 :
Texture Evolution in Aluminum Sheet Subjected to Friction Roll Surface Processing and Subsequent Annealing
Yoshimasa Takayama, Ryuichi Hamano, Takuya Arakawa, Kenta Nonaka, Hideo Watanabe and Hirofumi Inoue
313-316 :
Preparation and Characterization of MoSi2/WSi2 Composites from MASHSed Powder
Jianguang Xu, Yuchen Wang, Baicheng Weng and Fang Chen
317-326 :
Differences in Wear Behaviors at Sliding Contacts for β-Type and (α + β)-Type Titanium Alloys in Ringer’s Solution and Air
Yoon-Seok Lee, Mitsuo Niinomi, Masaaki Nakai, Kengo Narita and Ken Cho
327-332 :
Estimation of Stress Corrosion Cracking Initiation and Propagation in High-Pressure, High-Temperature Water Environment Utilizing Acoustic Emission
Takuma Matsuo, Keita Sano, Yohei Sakakibara and Gen Nakayama
333-339 :
Carbide Spray Coating Influence on Wear Behavior of Carburized Steel against Two Counter-Rollers
Liu-Ho Chiu, Shu-Hung Yeh, Bo-Rong Chen and Heng Chang
340-347 :
Separation of Nickel and Cobalt Utilizing Selective Reduction of Nickel in Acidic Aqueous Solution
Sakae Shirayama and Tetsuya Uda
348-352 :
Fabrication of Three-Dimensional Titania Building Blocks on Glass Substrate from Mono-Dispersed Titanium Glycolate Spheres and Their Photocatalystic Properties
Duck-hyun Song and Tetsuji Hirato
353-360 :
H2 Oxidation Activity and Tolerance to CO Poisoning of the Electrochemically Reduced Pt Oxide Catalyst
Masami Taguchi, Yoshihide Kametani and Hiroki Takahashi
361-366 :
Sliding Wear Properties of Ti/TiC Surface Composite Layer Formed by Laser Alloying
Takuto Yamaguchi, Hideki Hagino, Yasuhiro Michiyama and Atsushi Nakahira
367-371 :
Formation of Inter-Diffusion Layer between NiCrAlY Coating and Nb Substrate during Vacuum Heat-Treatment
Shigeru Saito, Toshiyuki Takashima, Katsumi Miyama, Toshio Narita and Linruo Zhao
372-376 :
Production of Nanocrystalline (Fe, Co)-Si-B-P-Cu Alloy with Excellent Soft Magnetic Properties for Commercial Applications
Kana Takenaka, Albertus D. Setyawan, Yan Zhang, Parmanand Sharma, Nobuyuki Nishiyama and Akihiro Makino
377-380 :
Photoassisted Electrodeposition of a Copper(I) Oxide Film
Seunghun Kim, Yongkuk Kim, Jaegoo Jung and Won-Seok Chae
381-388 :
Effects of Heterogeneous Cracking of Superconducting Layer on Voltage-Current Curve, Critical Current, and n-Value in High-Temperature Superconducting Layer-Coated Conductor Tape
Shojiro Ochiai, Hiroshi Okuda, Noriyuki Fujii and Kozo Osamura
389-397 :
Effect of Hybrid Surface Treatments on Fretting Fatigue Strength of Stainless Steel
Toshihiro Omori, Tatsuro Morita, Kohei Okada and Hideaki Maeda
398-403 :
Evaluation of Corrosion Critical Variables of 304 Stainless Steel by Delay Time of Acoustic Emission
Kaige Wu, Woo-Sang Jung and Jai-Won Byeon
404-409 :
Effect of Annealing Temperature on Microstructure and Superelastic Properties of Ti-Au-Cr-Zr Alloy
Yuri Shinohara, Masaki Tahara, Tomonari Inamura, Shuichi Miyazaki and Hideki Hosoda
410-414 :
Ammonia Synthesis via Non-Equilibrium Reaction of Lithium Nitride in Hydrogen Flow Condition
Kiyotaka Goshome, Hiroki Miyaoka, Hikaru Yamamoto, Tomoyuki Ichikawa, Takayuki Ichikawa and Yoshitsugu Kojima
415-423 :
Site Preference and Stabilization of Antiferromagnetism in M-Substituted Mn2−xMxSb (M = Ti, Cr, Co, or Cu)
Junya Goto, Takatoshi Kakimoto, Shinpei Fujii and Keiichi Koyama
424-428 :
Application of Diffraction-Amalgamated Grain Boundary Tracking to Fatigue Crack Propagation Behavior in High Strength Aluminum Alloy
Hui Li, Hiroyuki Toda, Kentaro Uesugi, Akihisa Takeuchi, Yoshio Suzuki and Masakazu Kobayashi
429-434 :
Effect of Nb Addition on Martensitic Transformation Behavior of AuTi-15Co Based Biomedical Shape Memory Alloys
Hyunbo Shim, Masaki Tahara, Tomonari Inamua, Kenji Goto, Yoko Yamabe-Mitarai and Hideki Hosoda
435-440 :
Flotation Behavior of Arsenopyrite and Pyrite, and Their Selective Separation
Kyuhyeong Park, Junhyun Choi, Allan Gomez-Flores and Hyunjung Kim
441-444 :
Microstructure, Mechanical and High-Temperature Electrical Properties of Cyanide-Free Au-Coated Ag Wire (ACA)
Yi-Wei Tseng, Fei-Yi Hung and Truan-Sheng Lui
445-449 :
Feasibility Application of Cu-Contaminated Soil on the Removal of H2S from Hot Coal Gas
Lan-Chien Huang and Tzu-Hsing Ko
450-453 :
Effects of Titanium and Boron Additions with Mechanical Stirring on Mechanical Properties in Al-Si Alloys
JaeHwang Kim, KyungMoon Lee, HooDam Lee, TaeGyu Lee, HoonMo Park and HyunDal Park
454-456 :
Removal of Impurity Fe from Mg-3 mass% Al Alloy Melt by CO2 Injection
Taiki Morishige, Kazuchika Kurino and Toshihide Takenaka
457-457 :
Erratum

[JIM HOME] [JOURNAL ARCHIVES]

© 2015 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp