Materials Transactions Online

Materials Transactions, Vol.55 No.3 (2014)

395-395 :
PREFACE
Somei Ohnuki, Naoyuki Hashimoto, Erwan Oliviero, Jonathan Hinks and Hattar Khalid
396-402 :
In-Situ Observation of Radiation Damage Using a Combined Facility of Electron Microscope and Heavy-Ion Accelerator(s) —History and Future Prospectives—
Shiori Ishino
403-409 :
Development of TEM Holder Generating In-Plane Magnetic Field Used for In-Situ TEM Observation
Masashi Arita, Ryohei Tokuda, Kouichi Hamada and Yasuo Takahashi
410-412 :
A Triple Beam In-Situ Facility at Xiamen University
Bing Tang, Jian Zhang, Ruigang Ma, Yingjun Ma, Qinghua Huang, Lihua Chen, Baoqun Cui, Yazhao Wu, Ning Li and Weisheng Jiang
413-417 :
Simulation of Transmission Electron Microscope Images of Dislocations Pinned by Obstacles
Yuhki Satoh, Takahiro Hatano, Nobuyasu Nita, Kimihiro Nogiwa and Hideki Matsui
418-422 :
In Situ TEM Concurrent and Successive Au Self-Ion Irradiation and He Implantation
Claire Chisholm, Khalid Hattar and Andrew M. Minor
423-427 :
New Approach to In Situ Observation Experiments under Irradiation in High Voltage Electron Microscopes
Hiroaki Abe, Takahiro Ishizaki, Feng Li, Sho Kano, Yanfen Li, Yuhki Satoh, Takeshi Nagase and Hidehiro Yasuda
428-433 :
Microstructural Evolution of an Ion Irradiated Ni-Mo-Cr-Fe Alloy at Elevated Temperatures
Massey de los Reyes, Lyndon Edwards, Marquis A. Kirk, Dhriti Bhattacharyya, Kim T. Lu and Gregory R. Lumpkin
434-437 :
Comparison between In-Situ and Post-Irradiation Cyclic Deformation Structures in Ni by 150 MeV Proton Irradiation
Toshimasa Yoshiie, Koichi Sato, Qiu Xu, Yoshihiro Ishi, Tomonori Uesugi, Yasutosi Kuriyama and Yoshiharu Mori
438-442 :
Effect of Additional Minor Elements on Accumulation Behavior of Point Defects under Electron Irradiation in Austenitic Stainless Steels
Yoshihiro Sekio, Shinichiro Yamashita, Norihito Sakaguchi and Heishichiro Takahashi
443-446 :
Effect of Oxide Particles and Pre-Implanted Helium on Defect Evolution during Electron Irradiation
Siwei Chen, Kohei Tadaki, Yongming Wang, Naoyuki Hashimoto and Somei Ohnuki
447-450 :
Kink Band Formation in Graphite under Ion Irradiation at 100 and 298 K
Jonathan A. Hinks, G. Greaves, Sarah J. Haigh, Cheng-Ta Pan and Stephen E. Donnelly
451-457 :
In Situ TEM Observation of Structural Changes in Rapidly Solidified bcc Solid-Solution Phase in Ti-Cr Alloy Focusing on Spontaneous Vitrification (SV)
Takeshi Nagase, Satoshi Anada, Keita Kobayashi, Hidehiro Yasuda and Hirotaro Mori
458-460 :
In-Situ Observations of Microstructure Evolution in Electron-Irradiated Multi-Wall Carbon Nanotubes
N. Hashimoto, S. Oie, H. Homma and S. Ohnuki
461-465 :
In Situ Observation of Gold Chloride Decomposition in a Confined Nanospace by Transmission Electron Microscopy
Keita Kobayashi, Ryo Kitaura, Katsuhiro Sasaki, Kotaro Kuroda, Takeshi Saito and Hisanori Shinohara
466-472 :
Volume and Enthalpy Relaxation in Pd42.5Cu30Ni7.5P20 Bulk Metallic Glass
O. Haruyama, T. Mottate, K. Morita, N. Yamamoto, H. Kato and T. Egami
473-476 :
Magnetic Behavior of FePt/AlN Layered Structure
Cong Zhang, Ryūtarō Tajima, Takumi Sannomiya, Shinji Muraishi, Yoshio Nakamura and Ji Shi
477-481 :
Structural and Magnetic Properties of Magnetic Shape Memory Alloy Ni46Mn41In13 under Magnetic Fields
Kenichi Abematsu, Rie Y. Umetsu, Ryosuke Kainuma, Takeshi Kanomata, Kazuo Watanabe and Keiichi Koyama
482-488 :
Effect of Pre-Aging Treatment on the Microstructure and Magnetic Properties of Sm(Co,Fe,Cu,Zr)7.8 Sintered Magnets
Yosuke Horiuchi, Masaya Hagiwara, Keiko Okamoto, Tsuyoshi Kobayashi, Masaki Endo, Tadahiko Kobayashi, Naoyuki Sanada and Shinya Sakurada
489-492 :
Quantitative Evaluation of Phase Field Microstructure Based on the Variational Principle
Kenji Iseya and Tetsuo Mohri
493-500 :
Formation Mechanisms of Beachrocks in Okinawa and Ishikawa, Japan, with a Focus on Cements
Takashi Danjo and Satoru Kawasaki
501-505 :
Twinning Induced Plasticity and Work Hardening Behavior of Aged Cu-Ni-Si Alloy
Akiyoshi Araki, Warren J. Poole, Equo Kobayashi and Tatsuo Sato
506-510 :
Effects of Hydrogen Water Chemistry on Stress Corrosion Cracking Behavior of Cold-Worked 304L Stainless Steel in High-Temperature Water Environments
Wen-Feng Lu, Chien-Lin Lai and Jiunn-Yuan Huang
511-516 :
Effects of Cryo-Treatment on Corrosion Behavior and Mechanical Properties of Laser-Welded Commercial Pure Titanium
Yanping Zhu, Changyi Li and Lianyun Zhang
517-521 :
Synthesis of Fine Iron-Cobalt Alloy Particles by the Co-Reduction of Precursors with Solvated Electrons in Sodium-Ammonia Solution
Osamu Terakado, Yuichiro Uno and Masahiro Hirasawa
522-527 :
Microstructural and Electrical Properties of Copper-Titanium Alloy Dispersed with Carbon Nanotubes via Powder Metallurgy Process
Hisashi Imai, Katsuyoshi Kondoh, Shufeng Li, Junko Umeda, Bunshi Fugetsu and Makoto Takahashi
528-533 :
Microstructure and Mechanical Properties of Cu-40%Zn-0.5%Cr Alloy by Powder Metallurgy
Hisashi Imai, Shufeng Li, Katsuyoshi Kondoh, Yoshiharu Kosaka, Takuya Okada, Koji Yamamoto, Motoi Takahashi and Junko Umeda
534-538 :
Fabrication and Catalytic Decoloration Capacity of Nanodendritic Metals
Masataka Hakamada, Takayuki Matsuzawa and Mamoru Mabuchi
539-542 :
Surficial Chemical States of Li3N Synthesized on Lithium Target for Boron Neutron Capture Therapy
Shintaro Ishiyama, Yuji Baba, Ryo Fujii, Masaru Nakamura and Yoshio Imahori
543-548 :
Effect of Microstructure on the Mechanical Properties of Magnesium Composites Containing Dispersed Alumina Particles Prepared Using an MM/SPS Process
Hiroshi Fujiwara, Suguru Hamanaka, Shigehiro Kawamori and Hiroyuki Miyamoto
549-555 :
Relation of n-Value to Critical Current for Local Sections and Overall Sample in a SmBCO Coated Conductor Pulled in Tension
Shojiro Ochiai, Hiroshi Okuda, Shinji Nagano, Michinaka Sugano, Sang-Song Oh, Hong-Soo Ha and Kozo Osamura
556-560 :
Effect of Annealing on Magnetostrictive Properties of Fe-Co Alloy Thin Films
Takashi Nakajima, Teruaki Takeuchi, Isamu Yuito, Kunio Kato, Mikiko Saito, Katsuhiro Abe, Toshio Sasaki, Tetsushi Sekiguchi and Shin-ichi Yamaura
561-565 :
High Adhesive Force between Laminated Sheets of Copper and Polyurethane Improved by Homogeneous Low Energy Electron Beam Irradiation (HLEBI) Prior to Hot-Press
Masato Uyama, Naoki Fujiyama, Takumi Okada, Masae Kanda and Yoshitake Nishi
566-571 :
Creation of Adhesive Force between Laminated Sheets of Polytetrafluoroethylene (PTFE) and Polyethylene (PE) by Homogeneous Low Energy Electron Beam Irradiation Prior to Hot-Press for Bio-Adaptable Application
Masato Uyama, Masae Kanda and Yoshitake Nishi
572-576 :
Preparation and Properties of Ball-Milled MgH2/Al Nanocomposites for Hydrogen Storage
Hayao Imamura, Yoshiyuki Hashimoto, Takanori Aoki, Tomoki Ushijima and Yoshihisa Sakata
577-585 :
Control of Electrical and Thermal Properties by 8 vol% Al2O3 Distribution States in Zn-50Sn for AC-Low Voltage Fuses
Kazuhiro Matsugi, Hiromu Matsumoto, Yong-Bum Choi, Gen Sasaki, Ken-ichiro Suetsugu and Koji Fujii
586-590 :
Lead Trace Removal from Waste Electronic Scraps by Organic Acids
Doyun Shin, Jinki Jeong, Byung-su Kim, Sadia Ilyas and Jae-chun Lee
591-598 :
Production of Titanium Dioxide Directly from Titanium Ore through Selective Chlorination Using Titanium Tetrachloride
Jungshin Kang and Toru H. Okabe
599-604 :
Effect of Sintering Profile and Composition of Ni/Al2O3 Functional Gradient Materials Coating Layers via Pulsed DC Electrophoretic Deposition
Hyungsub Kim, Seungkyu Yang and Caroline Sunyong Lee
605-609 :
Indium Tin Oxide Films with Low Resistivity at Room Temperature Using DC Magnetron Sputtering with Grid Electrode
Ho-Nyun Lee, Jin-Young Hur, Hyun Jong Kim, Min Hyung Lee and Hong Kee Lee
610-615 :
Carbon Solubility in Liquid Iron Containing V, Mo and Ni
Do-Hyeong Kim, Min-Kyu Paek, Tae-Jung Kim, Seung-Yeon Won and Jong-Jin Pak
616-621 :
Reclaim of Rare Earth Metals from Bond Magnets by Means of Thermally Activated Semiconductors (TASC)
Y. Tsukada, H. Takahashi, M. Kaneko and J. Mizuguchi
622-628 :
Effect of Powder Preheating Temperature on the Properties of Titanium Coating Layers Manufactured by Kinetic Spraying
Kee-Ahn Lee, Myeong-Ju Lee, Ji-Sang Yu and Hyung-Jun Kim
629-632 :
Impact Damping in NiMnGa/Polymer Composites
Jorge Feuchtwanger, Jon Aurrekoetxea, Javier Zurbitu, Jose L. Vilas, Luis M. León, Jose M. Barandiaran, Hideki Hosoda and Volodymyr A. Chernenko
633-636 :
Influence of Cold Rolling on Diffusion Bondability of SUS316L Stainless Steel Sheets
Takashi Harumoto, Yuya Yamashita, Osamu Ohashi and Takashi Ishiguro

[JIM HOME] [JOURNAL ARCHIVES]

© 2014 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp