Materials Transactions Online

Materials Transactions, Vol.54 No.6 (2013)

859-859 :
PREFACE
Y. Norman Zhou, Akio Hirose, Guisheng Zou, Michael Mayer, Mathieu Brochu, Jae-Pil Jung, Anming Hu and Tomokazu Sano
860-865 :
Bondability of Copper Joints Formed Using a Mixed Paste of Ag2O and CuO for Low-Temperature Sinter Bonding
Tomo Ogura, Tomohiro Yagishita, Shinya Takata, Tomoyuki Fujimoto and Akio Hirose
866-871 :
Effect of Polyethylene Glycols with Different Polymer Chain Lengths on the Bonding Process Involving In Situ Formation of Silver Nanoparticles from Ag2O
Tomohiro Yagishita, Tomo Ogura and Akio Hirose
872-878 :
Mechanism of Low Temperature Sintering-Bonding through In-Situ Formation of Silver Nanoparticles Using Silver Oxide Microparticles
Fengwen Mu, Zhenyu Zhao, Guisheng Zou, Hailin Bai, Aiping Wu, Lei Liu, Dongyue Zhang and Y. Norman Zhou
879-883 :
Metal-Metal Bonding Process Using Cu+Ag Mixed Nanoparticles
Jianfeng Yan, Guisheng Zou, Yingchuan Zhang, Jiaxin Li, Lei Liu, Aiping Wu and Y. Norman Zhou
884-889 :
Molecular Dynamics Simulation of Sintering and Surface Premelting of Silver Nanoparticles
H. A. Alarifi, M. Atis, C. Özdoğan, A. Hu, M. Yavuz and Y. Zhou
890-894 :
Interfacial Nanostructure and Electrical Properties of Ti3SiC2 Contact on p-Type Gallium Nitride
Aiman bin Mohd Halil, Masakatsu Maeda and Yasuo Takahashi
895-898 :
Effect of Argon Ion Irradiation on Ohmic Contact Formation on n-type Gallium Nitride
Kota Kimura, Masakatsu Maeda and Yasuo Takahashi
899-904 :
Surface Mounting Process Using Hybrid Resin Sheet Including Self-Organizable Solder Particles
Shinji Fukumoto, Shu Inoue, Ryoichi Wakimoto, Yuto Yamamoto, Michiya Matsushima and Kozo Fujimoto
905-910 :
Thermal and Mechanical Properties of Flip Chip Package with Au Stud Bump
Sang-Su Ha and Seung-Boo Jung
911-915 :
Evolution of Interfacial Shear Force during Ultrasonic Al Ribbon Bonding
Masaya Ando, Masakatsu Maeda and Yasuo Takahashi
916-921 :
Deformation Behavior of Thick Aluminum Wire during Ultrasonic Bonding
Masakatsu Maeda, Yasuhiro Yoneshima, Hideki Kitamura, Keita Yamane and Yasuo Takahashi
922-925 :
Investigation on Microwelding of Microchip by Laser without Solder
Jianwen Yuan, Jimin Chen, Furong Liu and Chao Huang
926-930 :
Femtosecond Laser Direct Joining of Copper with Polyethylene Terephthalate
Tomokazu Sano, Shogo Iwasaki, Yasuyuki Ozeki, Kazuyoshi Itoh and Akio Hirose
931-933 :
Diffusion Bonding of Cu-Cu with Al-Ni Nano Multilayers
Y. P. Zhang, Y. Q. Yang, J. L. Yi and H. C. Hu
934-939 :
Grain Refinement during Rapid Solidification of Aluminum-Zirconium Alloys Using Electrospark Deposition
Mathieu Brochu and Gilberto Portillo
940-946 :
The Formation of Molecular Junctions between Graphene Sheets
Xin Wu, Haiyan Zhao, Minlin Zhong, Hidekazu Murakawa and Masahiro Tsukamoto
947-952 :
Fabrication and Optical Spectral Characterization of Linked Plasmonic Nanostructures and Nanodevices
Tong Zhang, Xiao-Yang Zhang, Long-De Wang, Yuan-Jun Song, Meng-Na Lin, Lu-Ning Wang, Sheng-Qing Zhu and Ruo-Zhou Li
953-957 :
Effects of Transition Metal (TM: Co, Rh, Ni and Pd) Substitution for Ru on Thermoelectric Properties for Intermetallic Compound RuGa2
Y. Takagiwa, K. Kitahara and K. Kimura
958-963 :
Effects of Indenter Tilt on Nanoindentation Results of Fused Silica: an Investigation by Finite Element Analysis
Chengli Shi, Hongwei Zhao, Hu Huang, Lixia Xu, Luquan Ren, Meilin Bai, Jianping Li and Xiaoli Hu
964-968 :
A Numerical Method for Simulation of Nonlinear Eddy Current Testing Signals Based on Transient Ar Formulation
Shejuan Xie, Yunfei Li, Wenlu Cai, Hong-En Chen, Zhenmao Chen, Toshiyuki Takagi, Tetsuya Uchimoto and Yasuhiko Yoshida
969-973 :
Magnetic and Structural Properties of Mn1.8Co0.2Sb under High Magnetic Fields
Hiroki Orihashi, Masahiko Hiroi, Yoshifuru Mitsui, Kohki Takahashi, Kazuo Watanabe, Kazuyuki Matsubayashi, Yoshiya Uwatoko and Keiichi Koyama
974-976 :
Neutron Diffraction on LPSO Structure in Mg-Zn-Y Alloys
Wu Gong, Kazuya Aizawa, Stefanus Harjo, Jun Abe, Takaaki Iwahashi and Takashi Kamiyama
977-983 :
Microstructural and Mechanical Study of the Al-20Sn (mass%) Alloy Processed by Equal-Channel Angular Pressing by Route C
C. Hernández, I. A. Figueroa, C. Braham, O. Novelo-Peralta, G. A. Lara-Rodriguez and G. Gonzalez
984-989 :
Specimen Dimension and Grain Size Effects on Deformation Behavior in Micro Tensile of SUS304 Stainless Steel Foil
Jie Xu, Bin Guo, Debin Shan, Mingxing Li and Zhenlong Wang
990-993 :
Effects of 4 GPa Pressure Heat Treatment on Microstructure and Micro-Mechanical Properties of LC4 Aluminum Alloy
Yan Chen, Lin Liu, Jian-hua Liu and Rui-jun Zhang
994-1000 :
Fracture Toughness Evaluation of Thin Fe-Al Intermetallic Compound Layer at Reactive Interface between Dissimilar Metals
Nobuhiko Kyokuta, Masaki Koba, Toshio Araki, Shoichi Nambu, Junya Inoue and Toshihiko Koseki
1001-1005 :
Stress Corrosion Cracking Behavior of Zirconium in Boiling Nitric Acid Solutions at Oxide Formation Potentials
Yasuhiro Ishijima, Chiaki Kato, Takafumi Motooka, Masahiro Yamamoto, Yoichi Kano and Tetsunari Ebina
1006-1011 :
Molten Salt Pulse Electrodeposition of Silicon on Low Silicon Steel
Hai-li Yang, Lei Shang, Guo-zhang Tang, Yu-zhu Zhang and Yun-gang Li
1012-1017 :
Fabrication of an Al Foam/Dense Steel Composite by Friction Welding
Yoshihiko Hangai and Masaki Saito
1018-1024 :
Microstructure and Charge-Discharge Characteristics of Ag-AgCl Coated Natural Bamboo Carbon
Chih-Hsien Wang, Fei-Yi Hung, Truan-Sheng Lui and Li-Hui Chen
1025-1028 :
Formation of Anti-Reflection Coating by Hydrothermal Treatment of Aluminum Films and Their Stabilization by Dehydration
Aki Egashira, Takuji Ube, Yusuke Hosoki, Takashi Harumoto and Takashi Ishiguro
1029-1033 :
Preparation and Characterization of a Cylinder-Type Adsorbent for the Recovery of Lithium from Seawater
Taegong Ryu, Junho Shin, Jungho Ryu, Insu Park, Hyejin Hong, Byoung-Gyu Kim and Kang-Sup Chung
1034-1039 :
Improvement of Mechanical and Electrical Properties on the Sintered Ni-50 mass% Cr Alloys by HIP Treatment
Shih-Hsien Chang, Jing-Chi Chen, Kuo-Tsung Huang and Jhewn-Kuang Chen
1040-1044 :
Aging Effect on Adhesion Strength between Electroless Copper and Polyimide Films
Ho-Nyun Lee, Yoonsung Han, Jang-hun Lee, Jin-Young Hur and Hong Kee Lee
1045-1048 :
A Novel Process for Extracting Precious Metals from Spent Mobile Phone PCBs and Automobile Catalysts
Byung-Su Kim, Jae-Chun Lee, Jinki Jeong, Dong-Heo Yang, Doyun Shin and Kang-In Lee
1049-1052 :
Mechanochemical Synthesis and Rapid Consolidation of Nanocrystalline Al2O3-2.25Co Composite by High-Frequency Induction Heating and Its Mechanical Properties
Na-Ra Park and In-Jin Shon
1053-1056 :
Thermal Fatigue Behavior Evaluation of Shot-Peened JIS SKD61 Hot-Work Mold Steel
Shu-Hung Yeh, Liu-Ho Chiu, Tao-Liang Chuang and Cheng-Yen Wu
1057-1059 :
Effect of Die Material on Compressive Properties of Open-Cell Porous Aluminum Fabricated by Friction Powder Compaction Process
Yoshihiko Hangai, Hiroaki Yoshida, Osamu Kuwazuru and Nobuhiro Yoshikawa
1060-1062 :
Nanostructured CeO2-Al2O3 Catalytic Powders for m-Xylene and Toluene Combustion
Luu M. Dai, Dao Ng. Nhiem, Duong Th. Lim and Nguyen D. Van
1063-1065 :
Low-Temperature Bonding of Silver Derived from Silver-Oxide Particles to Nickel
Yusuke Yasuda, Eiichi Ide and Toshiaki Morita

[JIM HOME] [JOURNAL ARCHIVES]

© 2013 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp