Materials Transactions Online

Materials Transactions, Vol.54 No.4 (2013)

419-419 :
PREFACE
420-424 :
Microstructures and Deuterium-Retention Behavior of Tungsten Exposed to D+(He and/or Be) Mixture Plasmas
Mitsutaka Miyamoto, Daisuke Nishijima, Matthew J. Baldwin, Russell P. Doerner, Yoshio Ueda, Akio Sagara and Hiroaki Kurishita
425-429 :
Clarification of Tritium Behavior in Pb-Li Blanket System
S. Fukada, T. Terai, S. Konishi, K. Katayama, T. Chikada, Y. Edao, T. Muroga, M. Shimada, B. Merrill and D. K. Sze
430-436 :
Behaviors of Deuterium Retention and Microstructure Change of Tungsten Simultaneously Implanted with Carbon and/or Helium Ions
Yasuhisa Oya, Makoto Kobayashi, Tetsuo Fujishima, Kiyotaka Kawasaki, Yuto Miyahara, Naoaki Yoshida, Yuji Hatano, Naoko Ashikawa, Akio Sagara and Kenji Okuno
437-441 :
Retention of Hydrogen Isotopes in Neutron Irradiated Tungsten
Yuji Hatano, Masashi Shimada, Yasuhisa Oya, Guoping Cao, Makoto Kobayashi, Masanori Hara, Brad J. Merrill, Kenji Okuno, Mikhail A. Sokolov and Yutai Katoh
442-445 :
Irradiation Effect on Tensile Property of F82H IEA and Its Joint in TITAN Project
Naoyuki Hashimoto, Hiroshi Oka, Takeo Muroga, Takuya Nagasaka, Akihiko Kimura, Shigeharu Ukai, Takuya Yamamoto and Michail A. Sokolov
446-450 :
Ion-Irradiation Hardening of Brazed Joints of Tungsten and Oxide Dispersion Strengthened (ODS) Ferritic Steel
Y. Himei, K. Yabuuchi, R. Kasada, S. Noh, H. Noto, T. Nagasaka, S. Nogami and A. Kimura
451-455 :
Evaluation of Feasibility of Tungsten/Oxide Dispersion Strengthened Steel Bonding with Vanadium Insert
Hiroyuki Noto, Akihiko Kimura, Hiroaki Kurishita, Satoru Matsuo and Shuhei Nogami
456-465 :
Development of Nanostructured Tungsten Based Materials Resistant to Recrystallization and/or Radiation Induced Embrittlement
H. Kurishita, H. Arakawa, S. Matsuo, T. Sakamoto, S. Kobayashi, K. Nakai, G. Pintsuk, J. Linke, S. Tsurekawa, V. Yardley, K. Tokunaga, T. Takida, M. Katoh, A. Ikegaya, Y. Ueda, M. Kawai and N. Yoshida
466-471 :
Neutron Irradiation Behavior of Tungsten
Akira Hasegawa, Makoto Fukuda, Takashi Tanno and Shuhei Nogami
472-476 :
Silicon Carbide and Silicon Carbide Composites for Fusion Reactor Application
Tatsuya Hinoki, Yutai Katoh, Lance L. Snead, Hun-Chae Jung, Kazumi Ozawa, Hirokazu Katsui, Zhi-Hong Zhong, Sosuke Kondo, Yi-Hyun Park, Chunghao Shih, Chad M. Parish, Roberta A. Meisner and Akira Hasegawa
477-483 :
Integrated Material System Modeling of Fusion Blanket
A. Sagara, R. Nygren, M. Miyamoto, D. Nishijima, R. Doerner, S. Fukada, Y. Oya, T. Oda, Y. Watanabe, K. Morishita, F. Gao and T. Norimatsu
484-492 :
Enthalpies of Solution in Ti-X (X = Mo, Nb, V and W) Alloys from First-Principles Calculations
Tokuteru Uesugi, Syo Miyamae and Kenji Higashi
493-497 :
Arrangements of Transition-Metal Atoms in Three Types of Al-Co-Ni Decagonal Quasicrystals Studied by Cs-Corrected HAADF-STEM
K. Hiraga and A. Yasuhara
498-504 :
Annealing Effects on Structures and Morphologies of Fe/Si Core-Shell Clusters
Kenji Sumiyama, Satoshi Kadowaki, Yuichiro Kurokawa, Naokage Tanaka, Ryoji Katoh and Takehiko Hihara
505-511 :
Effects of Friction Stir Process and Stabilizing Heat Treatment on the Tensile and Punch-Shear Properties of Mg-9Li-2Al-1Zn Magnesium Alloy
Hsiang-Ching Chen, Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Jiun-Wei Huang
512-519 :
High Temperature Deformation and Dynamic Recrystallization Behavior of Alloy718
Takanori Matsui
520-527 :
Formation of Titanium Hydride in Dilute Cu-Ti Alloy by Aging in Hydrogen Atmosphere and Its Effects on Electrical and Mechanical Properties
Satoshi Semboshi, Satoshi Yamauchi and Hiroshi Numakura
528-531 :
Effect of ARB Processing on Fatigue Crack Closure in Commercially Pure Titanium
Hiromoto Kitahara, Sho Matsushita, Masayuki Tsushida and Shinji Ando
532-539 :
Cluster Analysis of Acoustic Emissions Measured during Deformation of Duplex Stainless Steels
R. Takeda, Y. Kaneko, D. L. Merson and A. Vinogradov
540-543 :
Effect of High Pressure Heat Treatment on Microstructure and Thermal Expansion Coefficients of Cu-Al Alloy
Ma Yu-quan
544-552 :
Phase Relationship for the CaO-SiO2-FeO-5 mass%P2O5 System with Oxygen Partial Pressure of 10−8 atm at 1673 and 1623 K
Xu Gao, Hiroyuki Matsuura, Il Sohn, Wanlin Wang, Dong Joon Min and Fumitaka Tsukihashi
553-560 :
Pitting Corrosion Behavior of Silver-Containing 2205 Duplex Stainless Steel as Secondary Austenitic Phase Existed
Wei-Ping Huang, Chun-Hung Chen, Yong-Chih Chou, Dong-Yih Lin and Sheng-Min Yang
561-565 :
Electrochemical Behavior of Annealed Soft-Magnetic Fe-Si-B-P-Cu Alloy
Zhenhua Dan, Yasunobu Yamada, Yan Zhang, Masahiko Nishijima, Nobuyoshi Hara, Hiroyuki Matsumoto and Akihiro Makino
566-573 :
Comparison of Bond Order, Metal d Orbital Energy Level, Mechanical and Shape Memory Properties of Ti-Cr-Sn and Ti-Ag-Sn Alloys
Abdul Wadood, Tomonari Inamura, Yoko Yamabe-Mitarai and Hideki Hosoda
574-581 :
Development of High Modulus Ti-Fe-Cu Alloys for Biomedical Applications
Ken Cho, Mitsuo Niinomi, Masaaki Nakai, Junko Hieda and Yuuki Kawasaki
582-587 :
Methanol Oxidation Activity and Chemical State of Platinum Oxide Thin Film Treated by Electrochemical Reduction
Masami Taguchi, Hiroki Takahashi and Syunsuke Nakajima
588-594 :
High Temperature Mechanical Properties of Al-Si-Mg-(Cu) Alloys for Automotive Cylinder Heads
Chang-Yeol Jeong
595-598 :
Development of Intermetallic Compounds Reinforced Al Alloy Composites Using Reaction of Porous Nickel and Aluminum
Y. B. Choi, K. Matsugi and G. Sasaki
599-602 :
Synthesis of Conductive Nano Ink Using 1-Octanethiol Coated Copper Nano Powders in 1-Octanol for Low Temperature Sintering Process
Jaehak Her, Danee Cho and Caroline Sunyong Lee
603-608 :
The Surface Properties of Plastic Mold Steel Subjected to Nitriding Treatment
Chun-Ming Lin, Lee-Long Han and Yih-Shiun Shih
609-617 :
Effects of β-Mg2Si Precipitates on Semi-Solid Microstructures of Wrought Al-Mg-Si Based Alloys Produced by Deformation-Semi-Solid-Forming Process
C. Phongphisutthinan, H. Tezuka, E. Kobayashi and T. Sato
618-625 :
Thermoelectric Characteristics of n-Type Bi2Te3 and p-Type Sb2Te3 Thin Films Prepared by Co-Evaporation and Annealing for Thermopile Sensor Applications
Jae-Hwan Kim, Jung-Yeol Choi, Jae-Man Bae, Min-Young Kim and Tae-Sung Oh
626-629 :
Integration of Temperature, Stress State, and Strain Rate for the Ductility of Ductile Metals
Hai Qiu
630-630 :
Editor’s Announcement

[JIM HOME] [JOURNAL ARCHIVES]

© 2013 The Japan Institute of Metals and Materials
Comments to us : editjt@jim.or.jp