Materials Transactions Online

Materials Transactions, Vol.53 No.11 (2012)

1831-1836 :
Establishment and Optimization of Angle Dispersive Neutron Diffraction Bulk Texture Measurement Environments
P. G. Xu, K. Akita, H. Suzuki, N. Metoki and A. Moriai
1837-1846 :
Application of Recrystallization Texture Evolution Model to Type 430 Stainless-Steel Strip Production
Toshiharu Morimoto, Fuyuki Yoshida, Yuji Kusumoto, Masahiko Oda and Jun Yanagimoto
1847-1851 :
Influence of Texture on Bendability of Cu-Ni-Si Alloys
Hiroshi Kaneko and Tatsuhiko Eguchi
1852-1857 :
Effect of Texture on 0°/180° Earing in Deep Drawing of Aluminum Alloy Sheets
Hiroki Tanaka and Shingo Ikawa
1858-1862 :
Misorientation Change of the Grain Boundary in Pure Copper Bicrystals Subjected to One-Pass Equal-Channel Angular Pressing
Yohei Wadamori, Kentoku Hirayama, Hiroshi Fujiwara, Toshiyuki Uenoya and Hiroyuki Miyamoto
1863-1869 :
Texture Evolution in Al-0.2 mass%Sc Alloy during ARB Process and Subsequent Annealing
Ehsan Borhani, Hamidreza Jafarian, Akinobu Shibata and Nobuhiro Tsuji
1870-1875 :
Texture Evolution in AZ80 Magnesium Alloy by the Plane Strain Compression Deformation at High Temperature
Jinuk Kim, Kazuto Okayasu and Hiroshi Fukutomi
1876-1880 :
Texture and Corrosion Behavior of Thin Nickel Sheet Formed by Pulse Plating and Cold Rolling
Yong Choi and Hirofumi Inoue
1881-1884 :
Formation and Evolution of Misoriented Grains in a-Plane Oriented Gallium Nitride Layers
Yuki Tokumoto, Hyun-Jae Lee, Yutaka Ohno, Takafumi Yao and Ichiro Yonenaga
1885-1891 :
Structural Changes and Stability Switching by Indentation Simulation in Amorphous Metals
Masaomi Nishimura, Yosuke Iwasaki and Masahiro Arai
1892-1895 :
Hydrothermal Synthesis of Different Zinc Oxide Nanostructures: Growth, Structure and Gas Sensing Properties
Ping Wang, Dong-yan Liu and Dong-sheng Li
1896-1904 :
Analysis for Kinetics of Ferrite Growth due to Isothermal Decarburization of Austenite in the Binary Fe-C System
Masanori Kajihara
1905-1909 :
Impact of Strain Rate on Thermomechanical Coupling Effects in TiNi SMA Subjected to Compression
Elzbieta A. Pieczyska, Hisaaki Tobushi, Karol Kulasinski and Kohei Takeda
1910-1914 :
Characterization of the Microstructure Evolution and Microsegregation in a Ni-Based Superalloy under Super-High Thermal Gradient Directional Solidification
Yongjun Zhang and Jianguo Li
1915-1921 :
Microstructural Evolution during Austenitization and Quenching of a 5% Cr Work Roll
Minwoo Kang, Minsu Jung, Hyongjik Lee and Young-Kook Lee
1922-1928 :
Microstructural Development and Coarsening Behavior of γ′ Precipitates in Co-Ni-Al-W-Base ODS Alloys
Lin Zhang, Xuanhui Qu, Mingli Qin, Rafi-ud-din, Xinbo He, Ye Liu and Dan Li
1929-1932 :
Electrical Resistivity and Morphology of Sn1−x/Six Core-Shell Cluster Network Prepared by a Plasma-Gas-Condensation Cluster Source
Yuichiro Kurokawa, Takehiko Hihara and Kenji Sumiyama
1933-1937 :
Mechanical Properties of TiB2-Al3Ti and TiB2-(Al,Ni)3Ti Composites
Masashi Yoshida and Takafumi Yumitate
1938-1945 :
Effects of Fine Particle Bombarding on Surface Characteristics and Fatigue Strength of Commercial Pure Titanium
Tatsuro Morita, Hidemasa Nakaguchi, Syo Noda and Chuji Kagaya
1946-1951 :
Electrodeposition Behavior of a Zn-Ni Alloy in an Alkaline Zincate Solution
Hiroaki Nakano, Shingo Arakawa, Yuya Takada, Satoshi Oue and Shigeo Kobayashi
1952-1955 :
Effects of Tool Geometry on Hardened Layer of Friction Stir Processed Cast Iron
Koichi Imagawa, Hidetoshi Fujii, Yoshiaki Morisada, Yasufumi Yamaguchi and Shoji Kiguchi
1956-1961 :
Surface Hydrophilicity and Osteoconductivity of Anodized Ti in Aqueous Solutions with Various Solute Ions
Dai Yamamoto, Takanori Iida, Kazushi Arii, Kensuke Kuroda, Ryoichi Ichino, Masazumi Okido and Azusa Seki
1962-1966 :
Correlation between Microstructure and Magnetic Properties in Sm2Fe17N3 Magnet Prepared by Pulsed Current Sintering
Hiroyuki Nakayama, Kenta Takagi, Kimihiro Ozaki and Keizo Kobayashi
1967-1971 :
Evaluation of the Microstructural Contribution to the Coercivity of Fine-Grained Nd-Fe-B Sintered Magnets
Togo Fukada, Masashi Matsuura, Ryota Goto, Nobuki Tezuka, Satoshi Sugimoto, Yasuhiro Une and Masato Sagawa
1972-1975 :
Electric Current-Induced Liquation Features of Cast Pure Tin
Gong-An Lan, Truan-Sheng Lui and Li-Hui Chen
1976-1980 :
Reduction in Lattice Thermal Conductivity of InSb by Formation of the ZnIn18GeSb20 Alloy
Donghun Kim, Ken Kurosaki, Yuji Ohishi, Hiroaki Muta and Shinsuke Yamanaka
1981-1985 :
Effect of Al Addition on Superelastic Properties of Aged Ti-Nb-Zr-Al Quaternary Alloys
Hiroyuki Tada, Tokujiro Yamamoto, Xinmin Wang and Hidemi Kato
1986-1991 :
Precipitation of Cerium Sulfate Converted from Cerium Oxide in Sulfuric Acid Solutions and the Conversion Kinetics
Namil Um and Tetsuji Hirato
1992-1996 :
Conversion Kinetics of Cerium Oxide into Sodium Cerium Sulfate in Na2SO4-H2SO4-H2O Solutions
Namil Um and Tetsuji Hirato
1997-2003 :
Quantitative Evaluation of the Abrasion Rate in Attrition Washing on Lead Contaminated Soil from Shooting Ranges
Chiharu Tokoro, Yutaro Yamaoka, Sei Yuki, Tomohiro Shiozawa and Shuji Owada
2004-2010 :
Structural Modification of Chalcopyrite Ore for Enhanced Copper Recovery
Sradhanjali Singh, Bansi Dar Nayak, Rama Chandra Mohanty, Swaranjit S. Cameotra, Lala Beheri Sukla and Dong-Jin Kim
2011-2018 :
Characteristics of Resistance Spot Welding for 1 GPa Grade Twin Induced Plasticity Steel
Jiyoung Yu, Junghyun Shim and Sehun Rhee
2019-2022 :
Investigation of Strain and Thin Film Relaxation in GexSi1−x/Si Strained-Layer Superlattice by Dark-Field Electron Holography
Zhifeng Wang, Yuan Yao, Xiaoqing He, Yang Yang, Lin Gu, Yanguo Wang and Xiaofeng Duan
2023-2027 :
Optimization of Laser Processing in the Fabrication of Stents
Cheng-Shun Chen, Sheng-Yao Lin, Nai-Kuan Chou, Yih-Sharng Chen and Sheau-Fan Ma
2028-2033 :
Creep Characterization in Advanced Heat-Resistant Steel Using Ultrasonic Nonlinearity Technique
Chung-Seok Kim
2034-2037 :
Recovery of Rhenium and Molybdenum from Molybdenite Roasting Dust Leaching Solution by Ion Exchange Resins
Sung-Ho Joo, Young-Uk Kim, Jin-Gu Kang, J. Rajesh Kumar, Ho-Sung Yoon, P. K. Parhi and Shun Myung Shin
2038-2042 :
Recovery of Molybdenum and Rhenium Using Selective Precipitation Method from Molybdenite Roasting Dust in Alkali Leaching Solution
Sung-Ho Joo, Young-Uk Kim, Jin-Gu Kang, Ho-Sung Yoon, Dong-Su Kim and Shun Myung Shin
2043-2048 :
Effect of Flame Spray Distance on the Adhesive Characteristics of Ni-20 mass%Cr Layers on SCM415 Substrates
Jae Bin Lee, Dong Hwan Shin, Joo Hyun Moon and Seong Hyuk Lee
2049-2055 :
The Effects of Crystallization on Mechanical Mechanism and Residual Stress of Sputtered Ag Thin Films
F. Y. Hung, T. S. Lui, Z. S. Hu, S. J. Chang, L. H. Chen and K. J. Chen
2056-2059 :
Synthesis and Characterization of Iron Oxide Nanoparticles Prepared by Electrical Explosion of Fe Wire in Ar-O2 Gas Mixtures
Kyungsun Song, Sujeong Lee, Chang-Yul Suh, Wonbaek Kim, Kyung-Seok Ko and Dongbok Shin
2060-2063 :
Strength Anisotropy of NITE-SiC/SiC Composite by Various Failure Modes
Y. B. Choi, T. Hinoki, K. Ozawa, Y. Katoh, K. Matsugi and T. Kelimu
2064-2066 :
Microstructure and Damping Capacity of Mg2Si/Mg-Al-Si-(Bi) Composites
Joong-Hwan Jun

[JIM HOME] [JOURNAL ARCHIVES]

© 2012 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp