Materials Transactions Online

Materials Transactions, Vol.53 No.5 (2012)

773-785 :
Hydrogen Effects on Ultrafine-Grained Steels Processed by High-Pressure Torsion
Yoji Mine and Zenji Horita
786-786 :
PREFACE
Toshihiko Kuwabara and Takaaki Iguchi
787-795 :
New Developments of Hydroforming in China
Shijian Yuan, Zhubin He and Gang Liu
796-800 :
Investigation on Corner Filling Process in Hydroforming of Thin-Walled Aluminum Alloy Tubular Part with Polygonal Sections
Xiaosong Wang, Peng Song and Shijian Yuan
801-806 :
Development of Nut-Inlaying Technique in Hydroformed Component by Hydro-Burring
Masaaki Mizumura, Koichi Sato and Yukihisa Kuriyama
807-811 :
Evaluation of Facture Criteria Considering Complex Loading Paths in Cobalt Alloy Tube Hydroforming
R. S. Lee, H. Y. Chiu, Y. J. Chen, Y. C. Lo and C. C. Wang
812-819 :
Numerical Evaluation of Hydro-Formed DP-Steel Tubes on Crash-Performance with Welding Heat Effects
Junehyung Kim, Kyung-Hwan Chung, Wonoh Lee and Daeyong Kim
820-825 :
Less Loading Tube-Hydroforming Technology on Eccentric Shaft Part by Using Movable Die
Qi Zhang, Chundong Wu and Shengdun Zhao
826-832 :
Effect of Outflow Volume of Pressure Medium on Fluid-Lubrication Effect during Sheet Hydroforming
Takayuki Hama, Toru Kitajima, Yoshihiko Nishimura, Hitoshi Fujimoto and Hirohiko Takuda
833-837 :
Effect of Heat Treatment on Microstructure and Mechanical Properties of TRIP Seamless Steel Tube
Zicheng Zhang, Yanmei Li, Ken-ichi Manabe and Fuxian Zhu
838-846 :
Finite Element Simulation of Hot Stamping of Tubular Beam and Its Application to Die Channel Design
Heon Young Kim, Jong Kyu Park and Myoung-Gyu Lee
847-852 :
Mechanical Characteristics of Low-Carbon-Steel Pipe Bent by Local Induction Heating with Small Bending Radii
Youngseon Lee, Jeongsuk Lim and Younghoon Moon
853-861 :
Development of a Tube-Spinning Machine for Thin Tubes with a Large Diameter
Takashi Kuboki, Kazuhito Takahashi, Kazuhiko Sanda, Susumu Moriya and Keisuke Ishida
862-869 :
Real-Time Process Control System of Dieless Tube Drawing with an Image Processing Approach
Sugeng Supriadi, Tsuyoshi Furushima and Ken-ichi Manabe
870-874 :
Suppression of Flatness in Circular Tube-Draw Bending by Applying Side Compression
Kazuhito Takahashi
875-878 :
Increasing the Working Limit of Extruded Aluminum Tubes During Draw Bending by Introducing a Wiper Die
Yusuke Okude, Shuji Sakaki, Shoichiro Yoshihara and Bryan J. MacDonald
879-884 :
Relationship between the Reinforcement Size and Mechanical Properties of Zr-Based Glassy Matrix Composites
Zhenhua Chu, Hidemi Kato, Takeshi Wada, Guoqiang Xie, Guangyin Yuan and Wenjiang Ding
885-892 :
Caliber Rolling Process and Mechanical Properties of High Fe-Containing Al-Mg-Si Alloys
Chakkrist Phongphisutthinan, Hiroyasu Tezuka, Tatsuo Sato, Susumu Takamori and Yoshiaki Ohsawa
893-901 :
Morphological and Crystallographic Characteristics of Incoherent Octahedral FCC Co Precipitates in a Cu Matrix
Tomotaka Miyazawa, Yuta Ozawa, Yoji Miyajima, Toshiyuki Fujii, Susumu Onaka and Masaharu Kato
902-906 :
Transmission Electron Microscopy of Twins in 10M Martensite in Ni-Mn-Ga Ferromagnetic Shape Memory Alloy
Mitsuhiro Matsuda, Yoshihiro Yasumoto, Kimiaki Hashimoto, Toru Hara and Minoru Nishida
907-912 :
Effect of Dislocation Density on the Initiation of Plastic Deformation on Fe-C Steels
Kaoru Sekido, Takahito Ohmura, Toru Hara and Kaneaki Tsuzaki
913-919 :
Surface Characteristic of Pure Titanium Sandblasted with Irregular Zirconia Particles and Acid-Etched
Shaobing Li, Jia Ni, Xiangning Liu, Haibin Lu, Shiheng Yin, Mingdeng Rong, Zehong Guo and Lei Zhou
920-925 :
High Temperature Corrosion of CoNiCrAlY-Si Alloys in the Liquid Phase of Na2SO4-NaCl
Toto Sudiro, Shoji Kyo, Osamu Ishibashi, Masaharu Nakamori and Kazuya Kurokawa
926-931 :
Wettability of Sn-Zn, Sn-Ag-Cu and Sn-Bi-Cu Alloys on Copper Substrates
Xiaorui Zhang, Hiroyuki Matsuura, Fumitaka Tsukihashi and Zhangfu Yuan
932-935 :
Preparation and Ionic Conductivity of Al-Doped Mg0.5Ti2(PO4)3
Hiroo Takahashi and Hitoshi Takamura
936-939 :
Microstructure and Electrochemical Behavior of Pd-Cu-Ni-P Bulk Metallic Glass and Its Crystallized Alloys
F. X. Qin, T. Wada, G. Q. Xie, S. L. Zhu and A. Inoue
940-945 :
Electrical Conductivity Enhancement of PTFE (Teflon) Induced by Homogeneous Low Voltage Electron Beam Irradiation (HLEBI)
Yoshitake Nishi, Shota Iizuka, Michael C. Faudree and Ryuichiro Oyama
946-950 :
Reflection Characteristics of Displacement Deposited Sn for LED Lead Frame
Zengfeng Xu, Santosh Kumar, Jae Pil Jung and Kyoung Kook Kim
951-958 :
Microstructural Characterization of Intermediate Layer Produced at Aluminum/Metallic Glass Interface Fabricated by Magnetic Pulse Welding
Mitsuhiro Watanabe, Shinji Kumai and Hisamichi Kimura
959-962 :
Finite Element Analysis of Tensile Fatigue Behavior of Coronary Stent
Pang Hao, Manabu Enoki and Kumi Sakurai
963-967 :
Effect of Heat Treatment under Stress on Torque Sensing Using Magnetostrictive (Fe-Ga-Al)-Zr-C Alloy Ring
Syusuke Hori, Teiko Okazaki, Yasubumi Furuya, Munekatsu Simada, Masanori Yokoyama and Motoichi Nakamura
968-972 :
Characteristics of Indium-Tin-Oxide (ITO) Glass Re-Used from Old TFT-LCD Panel
Sung-Jei Hong, Min-Sun Kim, Jong-Woong Kim and Myeongsuk Shin
973-979 :
Properties of Electrical Conductivity in Y-Doped CaZrO3
Jinxiao Bao, Yuji Okuyama, Zhiming Shi, Norihiko Fukatsu and Noriaki Kurita
980-984 :
Analysis of Biological Apatite Crystal Orientation in Anterior Cortical Bone of Human Mandible Using Microbeam X-ray Diffractometry
Hidetaka Furuya, Satoru Matsunaga, Yuichi Tamatsu, Takayoshi Nakano, Masao Yoshinari, Yoshinobu Ide and Shinichi Abe
985-990 :
Behaviors of Lead and Zinc in Top Submerged Lance (TSL) Plant at Sukpo Zinc Refinery
Byung-Su Kim, Soo-Buck Jeong, Jae-chun Lee, Doyun Shin and Nam-Il Moon
991-994 :
Texture Modification by Addition of Ca in Mg-Zn-Y Alloy
Joon Seok Kyeong, Jeong Kyun Kim, Myung Jae Lee, Yong Bum Park, Won Tae Kim and Do Hyang Kim
995-1001 :
Microstructural Effects of Zn/Mg Ratio and Post Heat Treatment on Tensile Properties of Friction Stirred Process (FSP) Al-xZn-yMg Alloys
Ming-Hsiang Ku, Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Wen-Ting Chiang
1002-1006 :
Surface Layer Characteristics of S30432 Austenite Stainless Steel after Shot Peening
K. Zhan, C. H. Jiang, X. Y. Wu and Vincent Ji
1007-1010 :
Dynamic Phase Transformation during Hot-Forging Process of a Powder Metallurgy α+β Titanium Alloy
B. Liu, H. Matsumoto, Y. P. Li, Y. Koizumi, Y. Liu and A. Chiba
1011-1016 :
Enhanced Mechanical Properties and Formability of Cross-Roll Rolled Ni-10Cr Alloy
K. H. Song, H. J. Lee and W. Y. Kim
1017-1021 :
Formation of One Pass Fully-Penetrated Weld Bead of Titanium Plate by Fiber Laser and MIG Arc Hybrid Welding
Takahiro Murakami, Kazuhiro Nakata, Naotsugu Yamamoto and Jinsun Liao
1022-1025 :
Microstructures and Mechanical Properties of Friction Stir Welded 2.25Cr-1Mo Steel
Don-Hyun Choi, Byung-Wook Ahn, Yun-Mo Yeon and Seung-Boo Jung
1026-1028 :
Electrodeposited Nanocrystalline Nickel Dispersed with Nano-Size WO3 Particles
Hiroyuki Miyamoto, Shota Takehara, Toshiyuki Uenoya, Hiroshi Fujiwara and Takuya Goto

[JIM HOME] [JOURNAL ARCHIVES]

© 2012 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp