Materials Transactions Online

Materials Transactions, Vol.53 No.3 (2012)

459-462 :
New Growth Mechanism of Cubic Rh Clusters Composed of 8-12 Atoms Found by the Method of Euclidean Designs
Makoto Tagami, Yunye Liang, Yoshiyuki Kawazoe and Motoko Kotani
463-468 :
Structure and Photocatalysis of TiO2/ZnO Double-Layer Film Prepared by Pulsed Laser Deposition
Lei Zhao, Maosheng Xia, Yuhua Liu, Biju Zheng, Qing Jiang and Jianshe Lian
469-476 :
Effects of Strain Rate and Temperature on Shear Properties and Fracture Characteristics of 316L Stainless Steel
Woei-Shyan Lee, Tao-Hsing Chen, Chi-Feng Lin and Zong-Yun Li
477-482 :
Use of Chlorine to Remove Magnesium from Molten Aluminum
Estéfano Aparecido Vieira, Jose Roberto de Oliveira, Gianni Ferreira Alves, Denise Crocce Romano Espinosa and Jorge Alberto Soares Tenório
483-488 :
Compression Behavior of Entrapped Gas in High Pressure Diecasting
Yasushi Iwata, Shuxin Dong, Yoshio Sugiyama and Hiroaki Iwahori
489-494 :
Metal Surface Modification with Vibration-Aided Micro-Forging
Yang Bai, Kenji Nishikawa and Ming Yang
495-499 :
Continuous Casting of Magnesium Alloy Sheet Using Semisolid Slurry
Futoshi Kido and Tetsuichi Motegi
500-503 :
Effect of Minor Sn Additions on the Formation and Properties of TiCuZrPd Bulk Glassy Alloy
Shengli Zhu, Guoqiang Xie, Fengxiang Qin, Xinmin Wang and Akihisa Inoue
504-507 :
Effects of High Pressure Heat Treatment on Microstructure and Micro-Mechanical Properties of Cu77.96Al22.04 Alloy
Lailei Wu, Lin Liu, Jianhua Liu and Ruijun Zhang
508-512 :
Formation of Amorphous TiO2 Film on Ti Using Anodizing in Concentrated H3PO4 Aqueous Solution and Its Osteoconductivity
Dai Yamamoto, Takanori Iida, Kensuke Kuroda, Ryoichi Ichino, Masazumi Okido and Azusa Seki
513-517 :
Hydrogenation Properties of Ternary Intermetallic Compounds Mg2−xPrxNi4
N. Terashita, K. Sakaki, S. Tsunokake, Y. Nakamura and E. Akiba
518-523 :
Pin-On-Disc Wear of Precipitation Hardened Titanium-Copper Alloys Fabricated by Powder Metallurgy
Tachai Luangvaranunt and Patchara Pripanapong
524-530 :
Preparation of Nanoporous Ruthenium Catalyst and Its CO Oxidation Characteristics
Masataka Hakamada, Junichi Motomura, Fumi Hirashima and Mamoru Mabuchi
531-536 :
Fabrication of Ultrafine-Grained Ti66Nb18Cu6.4Ni6.1Al3.5 Composites with High Strength and Distinct Plasticity by Spark Plasma Sintering and Crystallization of Amorphous Phase
Weiping Chen, Xuemei Wu, Chao Yang, Xiaoqiang Li, Mindan Chen and Yuanyuan Li
537-545 :
Crystal Grain Morphology Evolution over Ti, V, Nb and Ta Surface Heated in N2 Gas Environment to 2000°C by Filtered Concentrated Solar Beam in a Solar Furnace at PROMES-CNRS
Fernando Almeida Costa Oliveira, Luís Guerra Rosa, Gilles Peraudeau, Bernard Granier, Jorge Cruz Fernandes, Teresa Magalhães and Nobumitsu Shohoji
546-552 :
Influence of Dislocation Separation on Dynamic Strain Aging in a Fe-Mn-C Austenitic Steel
Motomichi Koyama, Takahiro Sawaguchi and Kaneaki Tsuzaki
553-558 :
Effects of Grafting Densities of Comb-Like Copolymer on the Dispersion Properties of Concentrated Cement Suspensions
Jiaping Liu, Qianping Ran, Changwen Miao and Min Qiao
559-564 :
Formation of Black Ceramic Layer on Aluminum Alloy by Plasma Electrolytic Oxidation in Electrolyte Containing Na2WO4
I. J. Hwang, K. R. Shin, J. S. Lee, Y. G. Ko and D. H. Shin
565-570 :
Bone Loss and Reduced Bone Quality of the Human Femur after Total Hip Arthroplasty under Stress-Shielding Effects by Titanium-Based Implant
Yoshihiro Noyama, Takuya Miura, Takuya Ishimoto, Takahiro Itaya, Mitsuo Niinomi and Takayoshi Nakano
571-574 :
Characteristics of Thin-Film-Transistors Based on Zn-In-Sn-O Thin Films Prepared by Co-Sputtering System
K. J. Chen, F. Y. Hung, T. S. Lui, S. J. Chang and T. Y. Liao
575-577 :
Diffusion of Tl Ions into Glass Treated by Molten Salt Ion Exchange and Hydrogen Reduction
Mikito Ueda, Hajime Matsunaga, Toshiaki Ohtsuka and Toshiharu Yamashita
578-581 :
Characteristics of Graphene-Filled Solderable Isotropically Conductive Adhesive (ICA)
Byung-Seung Yim, Seung-Hoon Oh, Jiwon Kim, Jooheon Kim and Jong-Min Kim


© 2012 The Japan Institute of Metals
Comments to us :