Vol.52 No.10

Materials Transactions, Vol.52 No.10 (2011)

1849-1852 :: Using the Low-Cost Waste Materials for Heavy Metals Removal from the Mine Wastewater
Radmila Marković, Jasmina Stevanović, Zoran Stevanović, Mile Bugarin, Dragutin Nedeljković, Aleksandar Grujić and Jasna Stajić-Trošić
1853-1859 :: Effect of Aging Treatment on Ultra-Fine Grains and Si-Phase in Al-0.5%Si Alloy Fabricated by ARB Process
Keiyu Nakagawa, Teruto Kanadani, Nobuhiro Tsuji, Daisuke Terada, Toshiaki Masui and Yasuhiko Sato
1860-1867 :: The Structures of Precipitates in an Mg-0.5 at%Nd Age-Hardened Alloy Studied by HAADF-STEM Technique
Kaichi Saito and Kenji Hiraga
1868-1875 :: Microstructural Evolution of Nanoindented Ag/Si Thin-Film under Different Annealing Temperatures
Woei-Shyan Lee, Tao-Hsing Chen, Chi-Feng Lin and Cheng-Lun Wu
1876-1884 :: Behavior of Branch Cracking and the Microstructural Strengthening Mechanism of Polycrystalline Ni-Base Superalloy, IN100 under Creep Condition
Yoshiko Nagumo, A. Toshimitsu Yokobori, Jr., Ryuji Sugiura, Takashi Matsuzaki, Hiroaki Takeuchi and Yusuke Ito
1885-1889 :: Transient Creep in High-Purity Aluminum at Ultra-Low Strain Rate and Room Temperature by Constant Stress and Changing-Stress Experiments
Junjie Shen, Ken-ichi Ikeda, Satoshi Hata and Hideharu Nakashima
1890-1898 :: Creep Mechanisms in a Fine-Grained Al-5356 Alloy at Low Stress and High Temperature
J. J. Shen, K. Ikeda, S. Hata and H. Nakashima
1899-1904 :: Ruthenium Solubility and Dissolution Behavior in Molten Slag
Hiroshi Shuto, Toru H. Okabe and Kazuki Morita
1905-1911 :: Surface Hot Shortness of Copper Containing Steel in a Compact Strip Production Process
Akihiro Takemura, Yusuke Ugawa, Kazutoshi Kunishige, Yasuhiro Tanaka, Shunichi Hashimoto and Kazuya Ootsuka
1912-1919 :: Relationship between Foam Stabilization and Physical Properties of Particles on Aluminum Foam Production
Kota Kadoi and Hideo Nakae
1920-1925 :: Mechanical Properties of Electron Beam Welded Spheroidal Graphite Cast Iron and Mild Steel Welded Joints
Shinichi Sekiguchi and Fumio Shibata
1926-1930 :: Effect of B₄C Size on Tensile Property of (TiB+TiC) Particulate Reinforced Titanium Matrix Composites by Investment Casting
Bong-Jae Choi and Young-Jig Kim
1931-1938 :: Numerical Simulation of Shrinkage Formation of Pure Sn Casting Using Particle Method
Naoya Hirata and Koichi Anzai
1939-1942 :: Preparation and Photocatalytic Property of TiO₂ Columnar Nanostructure Films
Zhengcao Li, Liping Xing, Na Zhang, Ye Yang and Zhengjun Zhang
1943-1948 :: Effects of Electron Beam Irradiation on Peeling Resistance of Laminated Sheet of High Strength Polypropylene (PP) and Bio-Adaptable Polydimethylsiloxane (PDMS)
Yoshitake Nishi, Hidenori Kawazu, Hiroaki Takei, Keisuke Iwata, Hiroyuki Kudoh and Kohji Mitsubayashi
1949-1953 :: Investigation of Changes in Phases and Properties of a TTCP/DCPA/CSH Cement Immersed in Hanks' Solution
Jiin-Huey Chern Lin, Szu-Yao Yu, Chang-Keng Chen, Wei-Luen Chen, Jing-Wei Lee, Ruey-Mo Lin and Chien-Ping Ju
1954-1959 :: An Effective Computational Approach to the Parametric Study of the Cathode Catalyst Layer of PEM Fuel Cells
S. Ahadian, N. Khajeh-Hosseini-Dalasm, K. Fushinobu, K. Okazaki and Y. Kawazoe
1960-1965 :: Multi-Walled Carbon Nanotube-Aluminum Matrix Composites Prepared by Combination of Hetero-Agglomeration Method, Spark Plasma Sintering and Hot Extrusion
Hiroki Kurita, Hansang Kwon, Mehdi Estili and Akira Kawasaki
1966-1971 :: Improvement in the Frequency Response of Loudspeakers by Using Diamond-Like Carbon Film Coatings
Chii-Ruey Lin, Shin-Hwa Liu, Wang-Jeng Liou and Chien-Kuo Chang
1972-1976 :: CO₂ Sequestration via a Surface-Modified Ground Granulated Blast Furnace Slag Using NaOH Solution
Kwang-suk You, Seong-Ho Lee, Sun-Ho Hwang, Hyung-seok Kim and Ji-Whan Ahn
1977-1982 :: Preparation and Characterization of Anthocyanin Dye and Counter Electrode Thin Film with Carbon Nanotubes for Dye-Sensitized Solar Cells
Ho Chang, Kun-Ching Cho, Tien-Li Chen, Kung-Hui Chu and Lii-Jenq Jiang
1983-1988 :: Carbonation of Chrysotile under Subcritical Conditions
Kyoung Won Ryu, Soo Chun Chae and Young Nam Jang
1989-1997 :: Influence of Rhenium on the Grain Boundary Strength, Phase Evolution, and High Temperature Mechanical Properties of a Fine-Grain Nickel-Base Superalloy at 982°C
Jian-Hong Liao, Hui-Yun Bor, Chuen-Guang Chao and Tzeng-Feng Liu
1998-2003 :: Dynamic Filling Characteristics of a Capillary Driven Underfill Process in Flip-Chip Packaging
Seong Hyuk Lee, Hyung Jun Lee, Jong-Min Kim and Young Eui Shin
2004-2006 :: Evaluation of Nitrogen Conversion Ratio on Reaction between BN and Aluminum
Makoto Kobashi, Kenzo Saiki and Naoyuki Kanetake
2007-2010 :: Rapid Synthesis and Consolidation of Nanostructured Mg₂SiO₄-MgAl₂O₄ Composites
In-Jin Shon, Hyun-Su Kang, Jung-Mann Doh and Jin-Kook Yoon

[JIM HOME] [JOURNAL ARCHIVES]