Materials Transactions, Vol.52 No.06 (2011) pp.1334-1337
© 2011 The Japan Institute of Metals

Modeling of Densification during Hot Pressing of Fe-Cu-Co-Ni-W-Sn Powder Mixture

Kyong Jun An

The master sintering curve (MSC) is an effective method to predict densification during sintering or hot pressing. In MSC, the sintered density is a unique function of the integral of a temperature function over time, irrespective of the heating path. As a practical application of the MSC, the Fe-based powder mixture consisting of 6 different metallic materials was used since it is one of the most common soft metal-bonds of the diamond tool industry. The effective activation energy of sintering was found to be 200.2 kJ/mol. It suggests that the dominant densification mechanism for the present metallic powder was the diffusion of Cu since the effective activation energy was in good agreement with that of self diffusion in Cu from literature. Three data sets having different heating rates merged onto a single curve when the density was plotted as a logarithmic function of &Theta, the integral of temperature function over time. Thus, the density versus &Theta profile can be used to predict the final density of Fe-based metallic powder at a given pressure regardless of heating history. The study was also extended to a range of pressures from 9.7 MPa to 58.1 MPa to generate the pressure-assisted master sintering surface (PMSS).

(Received 2011/2/15; Accepted 2011/3/11; Published 2011/5/18)

Keywords: iron-based metallic powder, pressure-assisted master sintering surface, master sintering curve, self diffusion of Cu

PDF (member)

PDF (organization)

Order Document

Table of Contents

REFERENCES

1. R. L. Coble and J. S. Ellis: J. Am. Ceram. Soc. 46 (1963) 438–441.
2. G. E. Gazza: Pressure Densification, Engineering Metal Handbook, Ceramics and Glasses, (ASM international 4, 1991) pp.296–303.
3. R. L. Coble: J. Appl. Phys. 41 (1970) 4798–4807.
4. M. R. Notis and P. Wingert: Sci. Sinter. 10 (1978) 35–44.
5. H. Su and D. L. Johnson: J. Am. Ceram. Soc. 79 (1996) 3211–3217.
6. J. D. Hansen, R. P. Rusin, M. Teng and D. L. Johnson: J. Am. Ceram. Soc. 75 (1992) 1129–1135.
7. D. L. Johnson, R. P. Rusin and J. D. Hansen: Sintering-Advances in Powder Metallurgy and Particulate Materials Vol.3, (Metal Powder Industries Foundation, Princeton, NJ, 1992) pp.17–24.
8. K. J. An and M. K. Han: Mater. Sci. Eng. A 391 (2005) 66.
9. S. J. Park, J. M. Martin, J. F. Guo, J. L. Johnson and R. M. German: Metall. Mater. Trans. A 37A (2006) 3337.
10. K. J. An and M. K. Han: Key Eng. Mater. 345 (2007) 931.
11. H. J. Frost and M. F. Ashby: Deformation-Mechanism Maps, The Plasticity and Creep of Metals and Ceramics, (Pergamnon Press, Oxford, New York, 1982).
12. E. A. Brandes and G. B. Brook: Smithells Metals Reference Book, 7th ed., (Butterworths, Oxford, 1992).
13. S. Li, W. Xiang, H. Zhai, Y. Zhou, C. Li and Z. Zhang: Mater. Res. Bull. 43 (2008) 2092–2099.
14. R. Boulesteix, A. Maitre, J. F. Baumard, C. Salle and Y. Rabinovitch: Opt. Mater. 31 (2009) 711–715.
15. M. Valant, D. Suvorov, R. C. Pullar, K. Sarma and N. M. Alford: J. Euro. Ceram. Soc. 26 (2006) 2777–2783.

© 2011 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp