
Materials Transactions, Vol.52 No.4 (2011)
- 585-585 :
-
PREFACE
Shin-ichi Orimo, Hai-Wen Li, Yumiko Nakamura and Min Zhu
- 586-590 :
-
Phase Transformation and Lattice-Strain Formation in Ti1.0V1.1Mn0.9 during First Absorption and Desorption
Saishun Yamazaki, Jin Nakamura, Kouji Sakaki, Yumiko Nakamura and Etsuo Akiba
- 591-594 :
-
Hydrogen Vibrational Excitation Spectra of CaF2-Type Metal Hydrides Synthesized from Ti-Based BCC Solid Solution Alloys
Yumiko Nakamura, Takashi Kamiyama and Etsuo Akiba
- 595-597 :
-
In Situ X-ray Diffraction Measurements of Aluminum Pulverization prior to the Hydrogenation Reaction
Hiroyuki Saitoh, Yuka Okajima, Yasuhiro Yoneda, Akihiko Machida, Yoshinori Katayama and Katsutoshi Aoki
- 598-601 :
-
Structural and Hydrogen Desorption Properties of Aluminum Hydride
Kazutaka Ikeda, Hidetoshi Ohshita, Naokatsu Kaneko, Junrong Zhang, Masao Yonemura, Toshiya Otomo, Kentaro Suzuya, Hiroshi Yukawa, Masahiko Morinaga, Hai-Wen Li, Satoshi Semboshi and Shin-ichi Orimo
- 602-604 :
-
Hydrogenation of Al3Ti at High Pressure and High Temperature
Hiroyuki Saitoh, Akihiko Machida, Yoshinori Katayama and Katsutoshi Aoki
- 605-609 :
-
Aging of Cu-3 at% Ti Alloys in Hydrogen Atmosphere: Influence of Hydrogen Pressure on Strength and Electrical Conductivity
Satoshi Semboshi, Tomoya Nishida and Hiroshi Numakura
- 610-613 :
-
Ta-W Alloy for Hydrogen Permeable Membranes
H. Yukawa, T. Nambu and Y. Matsumoto
- 614-617 :
-
Molecular Dynamics Study of the Particle Size Dependency of Structural Change in Hydrogenated Model f.c.c. Nanoparticles
Hiroshi Ogawa
- 618-622 :
-
Synthesis and Hydrogen Storage Behaviour of Pure Mg2FeH6 at Nanoscale
Xuanzhou Zhang, Wenhuai Tian, Junzhi Yang, Rong Yang, Jie Zheng and Xingguo Li
- 623-626 :
-
Cyclic Hydrogenation and Dehydrogenation Property of LiNH2 Impregnated into Ni Foam
Masaharu Menjo, Yoshihiro Hyodo, Satoko Moriyama, Hai-Wen Li, Motoaki Matsuo, Satoshi Semboshi and Shin-ichi Orimo
- 627-634 :
-
Hydrogen Storage Properties of the Mg(NH3)6Cl2-LiH Combined System
Yongfeng Liu, Ruijun Ma, Runlai Luo, Kun Luo, Mingxia Gao and Hongge Pan
- 635-640 :
-
Correlation between Structure of Titanium Additives and Dehydrogenation Reaction of Magnesium Borohydride Studied by Continuous Observation of X-Ray Absorption Spectroscopy
Daiju Matsumura, Takahiro Ohyama, Yuka Okajima, Yasuo Nishihata, Hai-Wen Li and Shin-ichi Orimo
- 641-646 :
-
Promotional Effect of Aluminum on MgH2+LiBH4 Hydrogen Storage Materials
Young Li, Toshihisa Izuhara and Hiroyuki T. Takeshita
- 647-650 :
-
Cooperative Catalysis on the Dehydrogenation of NdCl3 Doped LiBH4-MgH2 Composites
H. Wang, H. L. Zhang, C. Luo, T. Sun and M. Zhu
- 651-653 :
-
Hydrogen Releasing of Lithium Amidoborane-LiNH2BH3
Zaixing Yang, Yan Wang, Jing Liang and Jun Chen
- 654-657 :
-
Enhanced Electrical Conductivities of Complex Hydrides Li2(BH4)(NH2) and Li4(BH4)(NH2)3 by Melting
Yu Zhou, Motoaki Matsuo, Yohei Miura, Hitoshi Takamura, Hideki Maekawa, Arndt Remhof, Andreas Borgschulte, Andreas Züttel, Toshiya Otomo and Shin-ichi Orimo
- 658-662 :
-
Design of Gas Controllable H2 | H+electrolyte | Pt Cell and the Evaluation Method of a Dilute Hydrogen and Oxygen Gas in the Electrolyte
Shuji Harada, Yuki Nagai and Kazuya Kazama
- 663-671 :
-
Alloying Behavior of Ni3M-Type Compounds with D0a Structure
H. Sugimura, Y. Kaneno and T. Takasugi
- 672-676 :
-
Structures and Local Electronic States of Dislocation Loop in 4H-SiC via a Linear-Scaling Tight-Binding Study
Fusanori Hamasaki and Kenji Tsuruta
- 677-684 :
-
Kinetics of Solid-State Reactive Diffusion between Au and Al
Minho O and Masanori Kajihara
- 685-690 :
-
Microstructural Aspects during the Preparation of Y3Al5O12 by Combustion Synthesis and Temperature Field Simulation
Yuepeng Song, Jiangtao Li, Yixiang Chen, Wenwen Ji, Chong Soo Lee and Hyoung Seop Kim
- 691-698 :
-
Effect of Martensitizing Temperature on Creep Strength of Modified 9Cr Steel
Manabu Tamura, Takuya Kumagai, Nobuhiro Miura, Yoshihiro Kondo, Kei Shinozuka and Hisao Esaka
- 699-703 :
-
Hardening and Toughening Mechanisms of Cemented Carbides with Plate-Like WC Grains Prepared by Seeding
Kun Liu, Lihui Zhu and Ranran Tu
- 704-708 :
-
Activity Measurement of Titanium-Tin Alloys by Knudsen Effusion Method
Satoshi Itoh and Yosuke Inoue
- 709-713 :
-
Production of Ni-P Amorphous Alloy-Coated Bipolar Plate for PEM Fuel Cell by Electro-Less Plating
Sung-chul Kim, Shin-ichi Yamaura, Akihiro Makino and Akihisa Inoue
- 714-718 :
-
Surface Age Hardening and Wear Properties of Beta-Type Titanium Alloy by Laser Surface Solution Treatment
Yasuhiro Michiyama and Kei Demizu
- 719-727 :
-
Reactions of Ti, V, Nb and Ta with N2 Gas at 2000°C under Concentrated Solar Beam in a Solar Furnace at PROMES-CNRS
Nobumitsu Shohoji, Fernando Almeida Costa Oliveira, Luís Guerra Rosa, Gilles Peraudeau, Bernard Granier, Teresa Magalhães and Jorge Cruz Fernandes
- 728-733 :
-
Foaming Agents for Powder Metallurgy Production of Aluminum Foam
Takuya Koizumi, Kota Kido, Kazuhiko Kita, Koichi Mikado, Svyatoslav Gnyloskurenko and Takashi Nakamura
- 734-739 :
-
Effects of Electron Beam Irradiation on Elasticity of CFRTP (CF/PEEK)
Hiroaki Takei, Michelle Salvia, Alain Vautrin, Akira Tonegawa and Yoshitake Nishi
- 740-745 :
-
Microwave Absorption Properties of Polymer Modified Ni-Zn Ferrite Nanoparticles
Kazuaki Shimba, Kiyotaka Furuta, Nobuyuki Morimoto, Nobuki Tezuka and Satoshi Sugimoto
- 746-752 :
-
Investigation of a Flotation Process with De-Sliming and Attrition to Upgrade and Recover Cu and Mo from a Cu-Mo Flotation Tailing
Jan Pana Rabatho, William Tongamp, Atsushi Shibayama, Yasushi Takasaki, Sachihito Nitta and Tetsuo Imai
- 753-758 :
-
Long Time Stability of Pb-Free Sn-9Zn Elements for AC-Low Voltage Fuse Performance
Kazuhiro Matsugi, Yasuhiro Iwashita, Yong-Bum Choi, Gen Sasaki and Koji Fujii
- 759-767 :
-
Sintering Behavior of Tungsten Heavy Alloy Products Made by Plasma Spray Forming
Yueming Wang, Xiang Xiong, Lu Xie, Xuan Xu, Xiaobing Min and Feng Zheng
- 768-771 :
-
Laser-Induced Synthesis of CaMoO4 Nanocolloidal Suspension and Its Optical Properties
Jong-Won Yoon, Chel-Jong Choi and Daewon Kim
- 772-779 :
-
Parallel Receiving Needle Beam Ultrasonic Testing Technique
Hajime Takada and Takafumi Ozeki
- 780-786 :
-
Construction of Processing Map for Biomedical Co-29Cr-6Mo-0.23C-0.14N Alloy by Using Compression Tests
Yui Yamashita, Yunping Li, Hiroaki Matsumoto, Yuichiro Koizumi and Akihiko Chiba
- 787-794 :
-
A Three Dimensional Cellular Automaton Model for the Prediction of Solidification Morphologies of Brass Alloy by Horizontal Continuous Casting and Its Experimental Verification
De-Chang Tsai and Weng-Sing Hwang
- 795-801 :
-
Thermoelectric Properties of Fine-Grained PbTe Bulk Materials Fabricated by Cryomilling and Spark Plasma Sintering
Chia-Hung Kuo, Hsiu-Shan Chien, Chii-Shyang Hwang, Ya-Wen Chou, Ming-Shan Jeng and Masahiro Yoshimura
- 802-805 :
-
Microstructure Evaluation of Friction Stir Welded AZ91 with CaO Mg Alloy
Don Hyun Choi, Byung Wook Ahn, Shae Kwang Kim, Yun Mo Yeon, Young Jik Kim, Sun-Kyu Park and Seung Boo Jung
- 806-809 :
-
Abnormal Hydrogen Absorption/Desorption Properties of Nanoporous Pt with Large Lattice Strains
Masataka Hakamada, Toshiyuki Furukawa, Tao Yamamoto, Masaki Takahashi and Mamoru Mabuchi
- 810-813 :
-
Laser Forming of Zr-Based Coatings on AZ91D Magnesium Alloy Substrates for Wear and Corrosion Resistance Improvement
T. M. Yue and K. J. Huang
- 814-815 :
-
Comments on ``the Papers on Zr-Ti-Al-Ni-Cu Amorphous Alloy Sheets and Zr-Al-Ni-Cu Amorphous Alloy Wires Published in Materials Transaction JIM Vol.39, No.8 and No.12 (1998) and Vol.41, No.11 (2000)'' by Tao Zhang and Akihisa Inoue as well as the Relevance to the Errata Given in Materials Transactions Vol.51, No.8 (2010)
Hiroshi Oikawa and Yoshio Waseda
[JIM HOME]
[JOURNAL ARCHIVES]
© 2011 The Japan Institute of Metals
Comments to us :
editjt@jim.or.jp