Materials Transactions Online

Materials Transactions, Vol.52 No.3 (2011)

271-271 :
PREFACE
Hiroki Kurata Andrzej Czerwinski Kenji Matsuda
272-275 :
Superconducting Properties of MgB2 Particle Impregnated with Mg-Based Alloys
Yusuke Shimizu, Kenji Matsuda, Manabu Mizutani, Katsuhiko Nishimura, Tokimasa Kawabata, Susumu Ikeno, Yoshimitsu Hishinuma and Shigeki Aoyama
276-279 :
EELS and Ab-Initio Study of Faceted CSL Boundary in Silicon
Norihito Sakaguchi, Makito Miyake, Seiichi Watanabe and Heishichiro Takahashi
280-284 :
Interface Structure of Gold Particles on TiO2 Anatase
Daiki Nagamatsu, Takashi Nemoto, Hiroki Kurata, Jinting Jiu, Motonari Adachi and Seiji Isoda
285-291 :
Grain Boundary and Intragranular Reactions during Aging in Mg-Al System Alloys Poured into Sand and Iron Molds
Mitsuaki Furui, Yuhei Ebata, Hiroshi Yamada, Susumu Ikeno, Katsuya Sakakibara and Seiji Saikawa
292-296 :
FIB Induced Damage Examined with the Low Energy SEM
Šárka Mikmeková, Kenji Matsuda, Katsumi Watanabe, Susumu Ikeno, Ilona Müllerová and Luděk Frank
297-303 :
Fine Structure of Wing Scales in Chrysozephyrus Ataxus Butterflies
Jiřina Matějková-Plšková, Filip Mika, Satoshi Shiojiri and Makoto Shiojiri
304-308 :
Aluminum Alloy Based Nanocomposites Strengthened with Amorphous AlNiTiZr Phase
Jan Dutkiewicz, Agata Kukuła, Lidia Lityńska-Dobrzyńska and Wojciech Maziarz
309-314 :
Microstructure of Rapidly Solidified Al-12Zn-3Mg-1.5Cu Alloy with Zr and Sc Additions
Lidia Lityńska-Dobrzyńska, Jan Dutkiewicz, Wojciech Maziarz and Anna Góral
315-318 :
TEM Characterisation of Silicide Phase Formation in Ni-Based Ohmic Contacts to 4H n-SiC
Marek Wzorek, Andrzej Czerwinski, Andrian Kuchuk, Jacek Ratajczak, Anna Piotrowska and Jerzy Kątcki
319-323 :
Phase Characterization of Re-Based Diffusion Barrier Layer on Nb Substrate
Eni Sugiarti, Youngmin Wang, Naoyuki Hashimoto, Somei Ohnuki and Toshio Narita
324-330 :
Nucleation Behaviour of β to ømega Phase Transformations in β-Type Ti-Mo Alloys
E. Sukedai, M. Shimoda, H. Nishizawa and Y. Nako
331-335 :
Particle Size and Morphology of Iridium Oxide Nanocrystals in Non-Volatile Memory Device
Wei-Chih Li, Writam Banerjee, Siddheswar Maikap and Jer-Ren Yang
336-339 :
Microstructure Stability of 4th Generation Single Crystal Superalloy, PWA 1497, during High Temperature Creep Deformation
Maciej Zitara, Alan Cetel and Aleksandra Czyrska-Filemonowicz
340-344 :
Crystallographic Orientation Relationship between Discontinuous Precipitates and Matrix in Commercial AZ91 Mg Alloy
Kaname Fujii, Kenji Matsuda, Takumi Gonoji, Katsumi Watanabe, Tokimasa Kawabata, Yasuhiro Uetani and Susumu Ikeno
345-351 :
Interface Reactions between Conductive Ceramic Layers and Fe-Cr Steel Substrates in SOFC Operating Conditions
Kazimierz Przybylski and Tomasz Brylewski
352-357 :
The Early Stage of Dislocation Process around a Crack Tip Observed by HVEM-Tomography in Silicon Single Crystals
Masaki Tanaka, Sunao Sadamatsu, Hiroto Nakamura and Kenji Higashida
358-363 :
Effect of Internal Strain on Martensitic Transformations in NiTi Shape Memory Alloys
Danuta Stroz and Dariusz Chrobak
364-369 :
Electron Microscopy Studies of Non-Local Effects' Impact on Cathodoluminescence of Semiconductor Laser Structures
A. Czerwinski, M. Płuska, J. Ratajczak, A. Szerling and J. Ktcki
370-373 :
Structural and Magnetic Properties of Co2FeAl0.5Si0.5 Full-Heusler Alloy Thin Films on GaAs Substrates
Tatsuya Saito, Nobuki Tezuka and Satoshi Sugimoto
374-379 :
X-ray Diffraction Study of the Ordered Structures and Phase Relation in Pd-Mn Alloy System
Suo Yin, Miwako Takahashi, Rokuro Miida, Hiroshi Iwasaki and Ken-ichi Ohshima
380-385 :
Near-Surface Nanocomposite Structure on Commercial Purity Aluminum Induced by Fine Particle Bombardment
Norio Nakamura and Shin-ichi Takagi
[Erratum]
386-390 :
Solidification of High Chromium White Cast Iron Alloyed with Vanadium
Mirjana Filipovic, Zeljko Kamberovic and Marija Korac
391-396 :
On-the-Fly Kinetic Monte Carlo Simulation of Atomic Diffusion in L10 Structure
K. Sato, S. Takizawa and T. Mohri
397-405 :
Dynamic Behavior Evaluation of Martensitic Transformation in Cu-Al-Ni Shape Memory Alloy Using Acoustic Emission Simulation by FEM
Takeshi Yasuda, Baojun Pang, Hideo Nishino and Kenichi Yoshida
406-411 :
The Effect of Preheating on Notched Tensile Strength and Impact Toughness of Ti-6Al-6V-2Sn Laser Welds
Leu-Wen Tsay, Yun-Chen Jiang and Chun Chen
412-415 :
Synthesis and Properties of Carbon Short Fiber Reinforced ZrCuNiAl Metallic Glass Matrix Composite
Jinmin Liu, Haifeng Zhang, Xiaoguang Yuan, Huameng Fu and Zhuangqi Hu
416-422 :
Thermodynamics of Inclusion Formation and Its Influence on the Corrosion Behavior of Cu Bearing Duplex Stainless Steels
Soon-Hyeok Jeon, Soon-Tae Kim, In-Sung Lee, Joo-Hyun Park, Kwang-Tae Kim, Ji-Soo Kim and Yong-Soo Park
423-427 :
Effects of Implanted Deuterium on In-Situ Irradiation Fatigue Behaviors of Cold-Worked 316 Stainless Steel at 60 and 300°C
Yoshiharu Murase and Norikazu Yamamoto
428-432 :
Minimization of the Free Energy under a Given Pressure by Natural Iteration Method
Naoya Kiyokane and Tetsuo Mohri
433-438 :
High Temperature Corrosion of CoNiCrAlY-Si Alloys in an Air-Na2SO4-NaCl Gas Atmosphere
Toto Sudiro, Tomonori Sano, Shoji Kyo, Osamu Ishibashi, Masaharu Nakamori and Kazuya Kurokawa
439-446 :
Observation of High Resolution Microstructures in Thermal Sprayed Coatings and Single Deposited Splats Using Ion Beam Milling
KeeHyun Kim, Makoto Watanabe, Seiji Kuroda and Naomi Kawano
447-451 :
Analysis of Shear Droop on Cut Surface of High-Tensile-Strength Steel in Fine-Blanking Process
Toru Tanaka, Seiya Hagihara, Yuichi Tadano, Shuuhei Yoshimura, Takuma Inada, Takanobu Mori and Kenji Fuchiwaki
452-457 :
Reducing Work Load and Increasing Dimensional Accuracy in Parts for Bending of High-Strength Steel Sheets for Automobiles
Souichiro Nishino and Kunio Ohya
458-463 :
Suppression of Crystallization in Ti-Based Alloys by Fluxing
Ichiro Seki, Dmitri V. Louzguine-Luzgin, Toshitugu Takahashi, Hisamichi Kimura and Akihisa Inoue
464-468 :
Surface Analysis of Electrochromic Switchable Mirror Glass Based on Magnesium-Nickel Thin Film in Accelerated Degradation Test
Kazuki Tajima, Hiromi Hotta, Yasusei Yamada, Masahisa Okada and Kazuki Yoshimura
469-473 :
A Simple Model to Describe the Rule of Glancing Angle Deposition
Qin Zhou, Zhengcao Li, Jie Ni and Zhengjun Zhang
474-480 :
High Chromium Fe-Cr-Mo-P-C Amorphous Coating Films Produced by Thermal Spraying Technique
Masahiro Komaki, Tsunehiro Mimura, Ryurou Kurahasi, Masahisa Kouzaki and Tohru Yamasaki
481-485 :
Decomposition of Magnesium Hydride Fiber Observed Using TEM and In-Situ AFM
Itoko Matsumoto, Junko Matsuda, Yumiko Nakamura and Etsuo Akiba
486-490 :
Magnetic Properties of Nanoparticle–Polymer Composites Prepared Using Surface Modification and Cross-Linking Reaction
Kazuaki Shimba, Kiyotaka Furuta, Nobuyuki Morimoto, Nobuki Tezuka and Satoshi Sugimoto
491-497 :
Growth of Ti-Based Interface Layer in Cu(Ti)/Glass Samples
Shuji Uehara, Kazuhiro Ito, Kazuyuki Kohama, Takashi Onishi, Yasuharu Shirai and Masanori Murakami
498-506 :
Effects of CO2 Emissions Trading on Steel Scrap Recycling: A Simulation Analysis Using a Computable General Equilibrium Model
Masato Yamazaki
507-513 :
Effects of Hydrogen Diffusion on the Mechanical Properties of Austenite 316L Steel at Ambient Temperature
Yunsung Kim, Youngsuk Kim, Daewhan Kim, Sungsoo Kim, Wonjong Nam and Heeman Choe
514-520 :
Microstructural and Corrosion Characteristics of Iron-Silicon Alloyed Layer on 5083 Al Alloy by Electrical Discharge Alloying Processing
Hung-Mao Lin, Stambekova Kuralay and Jun-Yen Uan
521-525 :
Effect of Carbon on Spinodal Decomposition in Fe-26Mn-20Al-C Alloys
GowDong Tsay, YiHsuan Tuan, ChihLung Lin, ChuenGuang Chao and TzengFeng Liu
526-530 :
Pressure-Composition Isotherms of TiC1-x–H System at Elevated Temperatures
Teo Nozaki, Hirofumi Homma and Yuji Hatano
531-538 :
On-Line Detection System for Internal Flaws in As-Hot-Rolled Steel Strip Using Ultrasonic Probe Array
Hajime Takada, Yasuo Tomura, Makoto Aratani, Takuya Yamasaki and Toshihiro Sasaki
539-546 :
Ultrasonic Method for Testing Spot-Welds
Hajime Takada, Takafumi Ozeki, Rinsei Ikeda and Tomoyuki Hirose
547-553 :
Comparison of Theoretical Models of Electron-Phonon Coupling in Thin Gold Films Irradiated by Femtosecond Pulse Lasers
Jae Bin Lee, Kwangu Kang and Seong Hyuk Lee
554-559 :
Polycrystalline TiO2 Thin Films with Different Thicknesses Deposited on Unheated Substrates Using RF Magnetron Sputtering
Ching-Hua Wei and Ching-Min Chang
560-563 :
The Microstructure and Wear Properties of Laser-Clad WC-Cr3C2 Cermet Coating on Steel Substrate
Qianlin Wu and Wenge Li
564-567 :
Thermal Conductivity and Interconnectivity of Hexamethylene Diisocyanate Contained Polyurethane Grafted Multiwall Carbon Nanotube/Polyurethane Nanocomposite Film
Sungjin Yun, Hyungu Im and Jooheon Kim
568-571 :
Reactive Transient Liquid Phase Bonding between AZ31 Magnesium Alloy and Low Carbon Steel
Toshio Araki, Masaki Koba, Shoichi Nambu, Junya Inoue and Toshihiko Koseki
572-575 :
Alignment of Carbon Nanofibers in the Al2O3 Matrix under a Magnetic Field
Byung-Koog Jang, Kaoru Tsuda and Yoshio Sakka
576-579 :
Effect of Cracking on Mass Transport of Building Materials
Jiaping Liu, Shiping Zhang and Lan Zong
580-583 :
Effect of Pulse Frequency on Corrosion Behavior of AZ91 Mg Alloy Treated by Microarc Discharge Oxidation Coating
In Jun Hwang, Young Gun Ko, Kang Min Lee and Dong Hyuk Shin

[JIM HOME] [JOURNAL ARCHIVES]

© 2011 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp