Materials Transactions Online

Materials Transactions, Vol.52 No.2 (2011)

127-129 :
Formation of Defect Structure on Ge Surface by Ion Irradiation at Controlled Substrate Temperature
Noriko Nitta, Tokiya Hasegawa, Hidehiro Yasuda, Yoshihiko Hayashi, Toshimasa Yoshiie and Masafumi Taniwaki
130-134 :
Thermal Desorption Spectroscopy Study on the Hydrogen Trapping States in a Pure Aluminum
Takahiro Izumi and Goroh Itoh
135-138 :
Microstructure of Ti-Cr Nanoparticles Prepared by Electrical Wire Explosion
Sujeong Lee, Wonbaek Kim, Je-shin Park, Chang-yul Suh and Sung-wook Cho
139-141 :
Effect of a High Magnetic Field on Carbon Diffusion in γ-Iron
Shou-Jing Wang, Yan Wu, Xiang Zhao and Liang Zuo
142-146 :
Influence of Bath Composition on Tensile Ductility in Electrodeposited Bulk Nanocrystalline Nickel
Isao Matsui, Yorinobu Takigawa, Tokuteru Uesugi and Kenji Higashi
147-154 :
Two-Dimensional and Three-Dimensional Finite Element Analysis of Finite Contact Width on Fretting Fatigue
Heung Soo Kim, Shankar Mall and Anindya Ghoshal
155-158 :
Mechanical Properties of Titanium Particles Dispersed Magnesium Matrix Composite Produced through Accumulative Diffusion Bonding Process
Koichi Kitazono, Susumu Komatsu and Yuki Kataoka
159-165 :
Purification of Hafnium by Hydrogen Plasma Arc Melting
Kouji Mimura, Keigo Matsumoto and Minoru Isshiki
166-172 :
Prediction Method of Crack Sensitivity during DC Casting of Al-Mn and Al-Mg Alloys
Makoto Morishita, Mitsuhiro Abe, Kenji Tokuda and Makoto Yoshida
173-178 :
High Strength Bolt Manufacturing of Ultra-Fine Grained Aluminium Alloy 6061
Jun-Seok Choi, Young-Gwan Jin, Hyun-Chul Lee and Yong-Taek Im
179-188 :
Criterion for Constitutional Supercooling at Solid-Liquid Interface in Initial Transient Solidification with Varying Solute Content at Interface
Hiroshi Kato and Yukihiko Ando
189-195 :
Formation Mechanism of Eutectic Cu6Sn5 and Ag3Sn after Growth of Primary β-Sn in Sn-Ag-Cu Alloy
Yoshiko Takamatsu, Hisao Esaka and Kei Shinozuka
196-200 :
The Effect of Jetting Temperature on the Fabrication of Rapidly Solidified Fe-Si-B Systems Alloys Using Single-Roller Melt Spinning
Keiyu Nakagawa, Teruto Kanadani, Yasuyuki Mori and Yuto Ishii
201-209 :
Influence of Rhenium on the Mechanical Behavior and Fracture Mechanism of a Fine-Grain Superalloy at Elevated Temperatures
Jian-Hong Liao, Hui-Yun Bor, Chuen-Guang Chao and Tzeng-Feng Liu
210-218 :
Activation of Ground Granulated Blast Furnace Slag Cement by Calcined Alunite
Hyung-Seok Kim, Joo-Won Park, Yong-Jun An, Jong-Soo Bae and Choon Han
219-223 :
Grain Boundary Segregation of Phosphorus and Columnar Grain Growth during Decarburization in Plain Carbon Steels
N. H. Heo and J. K. Lee
224-228 :
Adsorption of Cd(II) on Waste Calcite Produced by the Carbonation of Flue Gas Desulfurization (FGD) Gypsum
Kyungsun Song, Wonbaek Kim, Taegong Ryu, Kyung-Won Ryu, Jun-Hwan Bang and Young-Nam Jang
229-234 :
Effect of TM-Addition on the Aging Behaviour of Al-Mg-Si Alloys
Shumei Wang, Kenji Matsuda, Tokimasa Kawabata, Yong Zou, Toshinari Yamazaki and Susumu Ikeno
235-238 :
Effect of Oxalic Acid on Heat Pretreatment for Serpentine Carbonation
Myung Gyu Lee, Kyoung Won Ryu, Young Nam Jang, Wonbaek Kim and Jun-Hwan Bang
239-242 :
Nanoimprinting of Metallic Glass for Periodic Nano-Hole Structures with Dies Fabricated by FIB-CVD and RIE
Yasuyuki Fukuda, Yasunori Saotome, Hisamichi Kimura and Akihisa Inoue
243-249 :
Plastic Working of Metallic Glass Bolts by Cold Thread Rolling
Shigeru Yamanaka, Kenji Amiya, Yasunori Saotome and Akihisa Inoue
250-253 :
Characteristics of Fe-Cr-Al Alloy Nanopowders Prepared by Electrical Wire Explosion Process under Liquid Media
Jung-Yeul Yun, Hye-Moon Lee, Si-Young Choi, SangSun Yang, Dong-Won Lee, Young-Jin Kim and Byoung-Kee Kim
254-257 :
Liquation Cracking of Dissimilar Aluminum Alloys during Friction Stir Welding
Sang-Woo Song, Sang-Hoon Lee, Byung-Chul Kim, Tae-Jin Yoon, Nam-Kyu Kim, In-Bae Kim and Chung-Yun Kang
258-260 :
Comparative Analysis of Trends Resulting from the Use of a Multi-Gaussian Curve Fitting Method Applied to the Visible Raman Spectra of Sputtered Amorphous Carbon
Ai-Lin Shen and Tse-Chuan Chou
261-264 :
Preparation of Titanium-Chromium Nitride by Gas Nitriding of the Explosion Products of Cr-Coated Ti Wire
Sujeong Lee, Wonbaek Kim, Chang-yul Suh, Sung-wook Cho, Taegong Ryu, Je-shin Park and In-Jin Shon
265-267 :
Some Aspects on the Discoloration and Antimicrobial Property of a Thermally Passivated Copper Surface in a Highly Humid Environment
An-Chou Yeh, Chin-Chuan Huang, Chih-Chen Hsiao, Te-Wei Chu, Yung-Chin Yang, Yi-Wei Feng and Kun-Yi Lin
268-270 :
An Effective Anti-Discoloration Coating for Copper
An-Chou Yeh, Chin-Chuan Huang and Chih-Chen Hsiao

[JIM HOME] [JOURNAL ARCHIVES]

© 2011 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp