
Materials Transactions, Vol.51 No.11 (2010)
- 1981-1989 :
-
Structure, Dye Degradation Activity and Stability of Oxygen Defective BaFeO3-x
Mengmeng Sun, Yinshan Jiang, Fangfei Li, Maosheng Xia, Bing Xue and Darui Liu
- 1990-1996 :
-
Core-Shell Formation and Juxtaposition in Fe and Si Hybrid Clusters Prepared by Controlling the Collision Stages
Naokage Tanaka, Kenji Sumiyama, Ryoji Katoh, Takehiko Hihara, Kazuhisa Sato, Toyohiko J. Konno and Ko Mibu
- 1997-2004 :
-
Dynamic Electropulsing Induced Phase Transformations in a Furnace Cooled Zn-Al Based Alloy (ZA22)
S. To, Y. H. Zhu, W. B. Lee and X. M. Liu
- 2005-2008 :
-
Ab Initio Molecular Dynamics Study of Fe Adsorption on TiN (001) Surface
Chao Wang, Yongbing Dai, Haiyan Gao, Xiaoming Ruan, Jun Wang and Baode Sun
- 2009-2012 :
-
Grain Refinement and Hardness Increase of Titanium via Trace Element Addition
J.-M. Oh, J.-W. Lim, B.-G. Lee, C.-Y. Suh, S.-W. Cho, S.-W. Lee and G.-S. Choi
- 2013-2018 :
-
Dependence of Microstructural Evolution of Nanoindented Cu/Si Thin Films on Annealing Temperature
Woei-Shyan Lee, Tao-Hsing Chen, Chi-Feng Lin and Yu-Liang Chuang
- 2019-2024 :
-
Refinement of Oxide Particles by Addition of Hf in Ni-0.5 mass%Al-1 mass%Y2O3 Alloys
Qingxin Tang, Takeshi Hoshino, Shigeharu Ukai, Bin Leng, Shigenari Hayashi and Yongming Wang
- 2025-2032 :
-
Determination of the Mechanical Properties of Extruded Pure Magnesium During Tension–Tension Low-Cycle Fatigue Using Ultrasonic Testing
Hideki Yamagishi, Mikio Fukuhara and Akihiko Chiba
- 2033-2038 :
-
Influence of Precipitation Behavior of Different Crystalline Phases for Embrittlement Behavior of Several Zr-Based Metallic Glasses
Ichiro Seki, Hisamichi Kimura, Kazuhiro Nakata and Akihisa Inoue
- 2039-2044 :
-
Generalized Self-Consistent Model for Predicting Thermal Conductivity of Composites with Aligned Short Fibers
Jae-Kon Lee and Jin-Gon Kim
- 2045-2048 :
-
Application of Dual-Energy K-Edge Subtraction Imaging to Assessment of Heat Treatments in Al-Cu Alloys
Hiroyuki Toda, Kazuyuki Shimizu, Kentaro Uesugi, Yoshio Suzuki and Masakazu Kobayashi
- 2049-2055 :
-
Factors Influencing Tensile Ductility of OFHC Cu Having Different Ultrafine Grained Structures
Lee Ju Park, Hyung Won Kim, Chong Soo Lee and Kyung-Tae Park
- 2056-2062 :
-
Synthesis of Fe Based Metallic Glass–Pd Based Metallic Glass Composite by Slightly Pressured Liquid Phase Sintering
N. Yodoshi, R. Yamada, N. Morita, A. Kawasaki and R. Watanabe
- 2063-2068 :
-
Grain Orientation and Texture Evolution in Pure Titanium Lap Joint Produced by Friction Stir Welding
Hong Liu, Kazuhiro Nakata, Naotsugu Yamamoto and Jinsun Liao
- 2069-2075 :
-
Laser-Generation Based Imaging of Ultrasonic Wave Propagation on Welded Steel Plates and Its Application to Defect Detection
Shigeki Yashiro, Nobuyuki Toyama, Junji Takatsubo and Tetsuro Shiraishi
- 2076-2079 :
-
Fabrication of Porous High-Purity Iron with Directional Pores by Continuous Zone Melting Technique
S. K. Hyun, M. Uchikoshi, K. Mimura, M. Isshiki and H. Nakajima
- 2080-2087 :
-
Corrosion Behavior of Magnesium with Hydroxyapatite Coatings Formed by Hydrothermal Treatment
Sachiko Hiromoto and Masanari Tomozawa
- 2088-2093 :
-
Microstructure Evolution of Dual-Directional-Extruded Mg Alloy AZ31: An Experimental and Simulation Study
Liwei Lu, Tianmo Liu, Yong Chen, Liguang Wang and Zhongchang Wang
- 2094-2098 :
-
Hybridization of FePt/ZnS Nanocore-Shell Structure with DNAs of Different Sequences
Ho Chang and Sheng-hong Wu
- 2099-2103 :
-
Fine-Sized Etching of Flexible Substrates Using Nano Particle Deposition System (NPDS)
Woojin Song, Yang-Hee Kim, Min-Saeng Kim, Sung-Hoon Ahn and Caroline Sunyong Lee
- 2104-2108 :
-
Extraction of Plastic Properties of Aluminum Single Crystal Using Berkovich Indentation
Jui-Chao Kuo and I-Hua Huang
- 2109-2112 :
-
A Comparison of the Effects of Pre-ECAR and Post-ECAR Aging on Microstructure and Strengthening in 7050 Al Alloy Sheet
Jun-Hyun Han
- 2113-2120 :
-
Effects of the Edm Combined Ultrasonic Vibration on the Machining Properties of Si3N4
Chaiya Praneetpongrung, Yasushi Fukuzawa, Shigeru Nagasawa and Ken Yamashita
- 2121-2124 :
-
Quantitative Analysis of Titanium Ions in the Equilibrium with Metallic Titanium in NaCl-KCl Equimolar Molten Salt
Hidehiro Sekimoto, Yoshitaro Nose, Tetsuya Uda and Hiroyuki Sugimura
- 2125-2128 :
-
Electrical Wire Explosion of Cr-Coated Ti Wire in N2 Gas
Wonbaek Kim, Sujeong Lee, Chang-yul Suh, Sung-wook Cho, Taegong Ryu, Je-shin Park and In-Jin Shon
- 2129-2131 :
-
Rapid Consolidation of Nanostructured TiCu Compound by High Frequency Induction Heating and Its Mechanical Properties
In-Jin Shon, Na-Ri Kim, Song-Lee Du, In-Yoong Ko, Sung-Wook Cho and Wonbaek Kim
[JIM HOME]
[JOURNAL ARCHIVES]
© 2010 The Japan Institute of Metals
Comments to us :
editjt@jim.or.jp