Vol.51 No.7

Materials Transactions, Vol.51 No.7 (2010)

1173-1177 :: Load Effects on Nanoindentation Behaviour and Microstructural Evolution of Single-Crystal Silicon
Woei-Shyan Lee, Tao-Hsing Chen, Chi-Feng Lin and Shuo-Ling Chang
1178-1182 :: Glassy Formability and Structural Variation of Zr_50-xCu₅₀Al_x (x=0∼25) Alloys with Respect to Icosahedral Short-Range Ordering
Yong Xu, Guoliang Chen, Yong Zhang, Fangli Tang and Xiongjun Liu
1183-1187 :: Influence on the Electro-Migration Resistance by Line Width and Average Grain Size along the Longitudinal Direction of Very Narrow Cu Wires
Khyoupin Khoo, Suguru Tashiro and Jin Onuki
1188-1193 :: Effect of Nb on Transformation Kinetics and Mechanical Properties in Zr-Al-Ni-Cu Metallic Glasses
Junji Saida, Albertus D. Setyawan, Mitsuhide Matsushita and Akihisa Inoue
1194-1199 :: Continuous Transition of Deformation Modes in Fe-30Mn-5Si-1Al Alloy
Motomichi Koyama, Takahiro Sawaguchi, Kazuyuki Ogawa, Takehiko Kikuchi and Masato Murakami
1200-1205 :: Method of Evaluating Workability in Cold Pilgering of Zirconium Alloy Tube
Hideaki Abe and Munekatsu Furugen
1206-1209 :: The Effect of Boron/Antimony on the Brittle-to-Ductile Transition in Silicon Single Crystals
Masaki Tanaka, Keiki Maeno and Kenji Higashida
1210-1215 :: Friction Coefficient in Hot Compression of Cylindrical Sample
Yunping Li, Emi Onodera and Akihiko Chiba
1216-1221 :: Adiabatic Shearing Localisation in High Strain Rate Deformation of Al-Sc Alloy
Woei-Shyan Lee, Tao-Hsing Chen, Chi-Feng Lin and Ging-Ting Lu
1222-1226 :: The Equilibrium Relation of Immiscibility in an Fe-Cu-B System at 1873 K
Katsuhiro Yamaguchi, Hideki Ono and Tateo Usui
1227-1230 :: Control of Si Crystal Growth during Solidification of Si-Al Melt
Yuki Nishi, Youngjo Kang and Kazuki Morita
1231-1236 :: Thermally Activated Cr₂O_3+x for Elimination of Volatile Organic Compounds
Hirotaka Hiramatsu, Ryo Iwamoto and Jin Mizuguchi
1237-1241 :: Hexagonally Ordered Ni Nanocone Array; Controlling the Aspect Ratio
T. Nagaura, K. Wada and S. Inoue
1242-1248 :: Analysis for Kinetics of Austenite Growth due to Isothermal Carburization of Ferrite
Masanori Kajihara
1249-1254 :: Investigation on Dynamic Friction Properties of Extruded AZ31 Magnesium Alloy Using by Ring Upsetting Method
Li-Fu Chiang, Hiroyuki Hosokawa, Jian-Yih Wang, Tokuteru Uesugi, Yorinobu Takigawa and Kenji Higashi
1255-1263 :: Determination of the Cyclic-Tension Fatigue of Extruded Pure Magnesium Using Multiple Ultrasonic Waves
Hideki Yamagishi, Mikio Fukuhara and Akihiko Chiba
1264-1271 :: Effect of Repeated Tempering on Hardness and Retained Austenite of High Chromium Cast Iron Containing Molybdenum
Sudsakorn Inthidech, Khatawut Boonmak, Prasonk Sricharoenchai, Nobuya Sasaguri and Yasuhiro Matsubara
1272-1276 :: Crack Monitoring during Plasma Spraying of Ceramic Coatings by Non-Contact Acoustic Emission Method
Kaita Ito, Satoshi Ohmata, Kazutaka Kobayashi, Makoto Watanabe, Seiji Kuroda and Manabu Enoki
1277-1280 :: Effect of TiB Whiskers Orientation on Mechanical Properties in an In Situ TiB/Ti-1100 Composite
Ma Feng-cang, Liu Ping, Li Wei, Liu Xin-kuan, Chen Xiao-hong and Zhang Di
1281-1287 :: Microstructures of Zr-Added Co-Cr-Mo Alloy Compacts Fabricated with a Metal Injection Molding Process and Their Metal Release in 1 mass% Lactic Acid
Madoka Murakami, Naoyuki Nomura, Hisashi Doi, Yusuke Tsutsumi, Hidefumi Nakamura, Akihiko Chiba and Takao Hanawa
1288-1295 :: Four-Dimensional Annihilation Behaviors of Micro Pores during Surface Cold Working
Hiroyuki Toda, Tomoyasu Yamaguchi, Mitsuru Nakazawa, Yoshimitsu Aoki, Kentaro Uesugi, Yoshio Suzuki and Masakazu Kobayashi
1296-1301 :: Change of Mechanical Property and Fracture Mode of Molybdenum by Carbon Addition
T. Kadokura, Y. Hiraoka, Y. Yamamoto and K. Okamoto
1302-1307 :: Magnetization Process in Sm₂Fe₁₇N₃ Fine Powders Studied Using Lorentz Microscopy and Electron Holography
Ki Hyun Kim, Joong Jung Kim, Daisuke Shindo, Takashi Ishikawa and Kenji Ohmori
1308-1312 :: Effect of Pulsed Magnetic Field on Spark Plasma Sintering of Iron-Based Powders
Xiaoqiang Li, Yongquan Ye, Yu Tang and Shengguan Qu
1313-1318 :: Kinetics of the Volatilization Removal of Zinc from Manganese Dust
Byung-Su Kim, Jae-chun Lee, Soo-Bock Jeong, Hoo-in Lee and Chan Wook Kim
1319-1325 :: Effect of Welding Parameters on Weld Formation and Mechanical Properties in Dissimilar Al Alloy Joints by FSW
Sang-Woo Song, Byung-Chul Kim, Tae-Jin Yoon, Nam-Kyu Kim, In-Bae Kim and Chung-Yun Kang
1326-1329 :: Microstructure and Gas-Sensing Property of Titania-Added ZnSnO₃
Wen Zeng, Tianmo Liu and Zhongchang Wang
1330-1339 :: Chlorine Occupancy Dependence of Crystal Structure of Pure β-Phase of Iron-Oxyhydroxide
Junko Takagi, Masataka Ozaki, Kazuhiro Shigemasa and Tadashi Mizoguchi
1340-1345 :: Surface Characteristics, Optical and Electrical Properties on Sol-Gel Synthesized Sn-Doped ZnO Thin Film
Kuan Jen Chen, Fei Yi Hung, Yen Ting Chen, Shoou Jinn Chang and Zhan Shuo Hu
1346-1349 :: The Effect of Cerium on Microstructures and Mechanical Properties of Mg-4Al-2Sn-1Ca Alloy
Byeong Ho Kim, Hisamichi Kimura, Yong Ho Park and Ik Min Park
1350-1353 :: A Novel Cyclic Process Involving Zinc for Separating Silver from Lead-Free Solder Residue
Byung-Su Kim, Jae-chun Lee and Soo-Kyung Kim
1354-1356 :: Visualization of Hydrogen on Ti-6Al-4V Using Hydrogen Microscope
Kei Tanaka, Shinichiro Kato, Masahiro Kitaura and Kazuyuki Ueda
1357-1360 :: Kinetic Arrest of Martensitic Transformation in NiCoMnAl Metamagnetic Shape Memory Alloy
Xiao Xu, Wataru Ito, Masashi Tokunaga, Rie Y. Umetsu, Ryosuke Kainuma and Kiyohito Ishida
1361-1363 :: VOC Decomposition System Based upon Heater-Integrated Catalyst Units Using NiO or Cr₂O₃
Atsushi Maki and Jin Mizuguchi
1364-1366 :: Bauschinger Effect on Springback of Clad Sheet Metals in Draw Bending
K. Yilamu, R. Hino, H. Hamasaki and F. Yoshida
1367-1369 :: The Effect of Sodium Silicate as pH Modifier and Depressant in the Froth Flotation of Molybdenite Ores
Chul-Hyun Park and Ho-Seok Jeon

[JIM HOME] [JOURNAL ARCHIVES]