Materials Transactions Online

Materials Transactions, Vol.50 No.12 (2009)

2703-2703 :
PREFACE
Mitsuo Niinomi, Takao Hanawa, Masahiko Ikeda, Akihiko Chiba, Tadashi Furuhara, Takayuki Narushima, Koichi Tsuchiya, Satoshi Emura, Takayoshi Nakano and Toshihide Takenaka
2704-2708 :
Influence of Current Density on the Reduction of TiO2 in Molten Salt (CaCl2 + CaO)
Keiichi Kobayashi, Yuichi Oka and Ryosuke O. Suzuki
2709-2715 :
Oxygen Distribution in Titanium Single Crystal Fabricated by Optical Floating-Zone Method under Extremely Low Oxygen Partial Pressure
Koji Hagihara, Takahiro Tachibana, Keita Sasaki, Yoshiyuki Yoshida, Naoki Shirakawa, Tohru Nagasawa, Takayuki Narushima and Takayoshi Nakano
2716-2720 :
Effect of Oxygen Content on Microstructure and Mechanical Properties of Biomedical Ti-29Nb-13Ta-4.6Zr Alloy under Solutionized and Aged Conditions
Masaaki Nakai, Mitsuo Niinomi, Toshikazu Akahori, Harumi Tsutsumi and Michiharu Ogawa
2721-2725 :
Effect of Nb Content on Deformation Textures and Mechanical Properties of Ti-18Zr-Nb Biomedical Alloys
Hirobumi Tobe, Hee Young Kim and Shuichi Miyazaki
2726-2730 :
Effect of Nitrogen Addition on Superelasticity of Ti-Zr-Nb Alloys
Masaki Tahara, Hee Young Kim, Tomonari Inamura, Hideki Hosoda and Shuichi Miyazaki
2731-2736 :
Effect of Cooling Rate on Superelasticity and Microstructure Evolution in Ti-10V-2Fe-3Al and Ti-10V-2Fe-3Al-0.2N Alloys
Yusaku Tomio, Tadashi Furuhara and Tadashi Maki
2737-2743 :
Isothermal Aging Behavior of Beta Titanium–Manganese Alloys
Masahiko Ikeda, Masato Ueda, Ryoichi Matsunaga, Michiharu Ogawa and Mitsuo Niinomi
2744-2750 :
Microstructure and Mechanical Properties of α' Martensite Type Ti Alloys Deformed under the α' Processing
Hiroaki Matsumoto, Kazuki Kodaira, Kazuhisa Sato, Toyohiko J. Konno and Akihiko Chiba
2751-2756 :
Cost Effective Pure Titanium with High Mechanical Response by Oxide Dispersion Strengthening
Tomohiro Yoshimura, Hisashi Imai, Thotsaphon Threrujirapapong and Katsuyoshi Kondoh
2757-2762 :
Mechanical Properties of a Titanium Matrix Composite Reinforced with Low Cost Carbon Black via Powder Metallurgy Processing
Thotsaphon Threrujirapapong, Katsuyoshi Kondoh, Hisashi Imai, Junko Umeda and Bunshi Fugetsu
2763-2771 :
Surface Hardening Treatment for Titanium Materials Using Ar-5%CO Gas in Combination with Post Heat Treatment under Vacuum
Y. Z. Kim, Takashi Konno, Taichi Murakami, Takayuki Narushima and Chiaki Ouchi
2772-2777 :
Effects of Current Density on Elongation of an Electropulsing Treated Zn-Al Based Alloy
S. To, Y. H. Zhu, W. B. Lee, X. M. Liu and Y. B. Jiang
2778-2784 :
Isothermal fcc/hcp Transformation in Fe-Si-C-Alloy Thermally Treated at Lower Bainitic Transformation Temperature
Kazuyuki Ogawa, Takahiro Sawaguchi and Setuo Kajiwara
2785-2789 :
Hardening Behavior in Aged Al-4%Cu-0.3%Mg Alloys with 0.5 and 2%Ag Additions
Joel Moreno Palmerin, Héctor J. Dorantes Rosales, Victor M. López Hirata, Nicolás Cayetano Castro, Jorge L. González Velázquez and Angel de J. Morales Ramirez
2790-2794 :
Effect of Trace Sodium on High Temperature Embrittlement in Quasi-Static and Impact Deformation of Al-5 mass% Mg Alloys
Hiroyuki Yamada, Keitaro Horikawa and Hidetoshi Kobayashi
2795-2800 :
Mechanical Behavior of Au-Based Metallic Glass in Micro-Scale at Ambient and Elevated Temperatures
C. J. Lee, Y. H. Lai, C. W. Tang, J. C. Huang and J. S. C. Jang
2801-2807 :
Microstructural Variation and Tensile Properties of a Cast 5083 Aluminum Plate via Friction Stir Processing
Chun-Yi Lin, Truan-Sheng Lui and Li-Hui Chen
2808-2812 :
Amino Acid Assisted Hydrothermal Synthesis of In(OH)3 Nanoparticles Controlled in Size and Shape
Takafumi Sasaki, Masafumi Nakaya, Kiyoshi Kanie and Atsushi Muramatsu
2813-2819 :
Carbide Phases Synthesised from C/Mo Powder Compacts at Specified Sub-Stoichiometric Ratios by Solar Radiation Heating to Temperatures between 1600°C and 2500°C
Bernard Granier, Nobumitsu Shohoji, Fernando Almeida Costa Oliveira, Teresa Magalhães, Jorge Cruz Fernandes and Luis Guerra Rosa
2820-2825 :
Effects of Process Parameters on the Macrostructure of a Squeeze-Cast Mg-2.5 mass%Nd Alloy
Yanling Yang, Liming Peng, Penghuai Fu, Bin Hu, Wenjiang Ding and Baozheng Yu
2826-2832 :
Effects of Electron Beam Irradiation on Impact Value of Carbon Fiber Reinforced Thermoplastic Polyetheretherketone
Yoshitake Nishi, Hiroaki Takei, Keisuke Iwata, Michelle Salvia and Alain Vautrin
2833-2838 :
Effect of Intermetallic Compound Layer on Tensile Strength of Dissimilar Friction-Stir Weld of a High Strength Mg Alloy and Al Alloy
Naotsugu Yamamoto, Jinsun Liao, Shuhei Watanabe and Kazuhiro Nakata
2839-2843 :
Observation of Magnetic Domain Structure in Fe81B15Si4 Amorphous Alloy by Lorentz Microscopy and Electron Holography
Masahiro Hiraoka, Zentaro Akase, Daisuke Shindo, Yuichi Ogawa and Yoshihito Yoshizawa
2844-2847 :
Development of a New Gravity Separator for Plastics —a Hybrid-Jig—
Kunihiro Hori, Masami Tsunekawa, Masatsune Ueda, Naoki Hiroyoshi, Mayumi Ito and Hideaki Okada
2848-2851 :
Conductivity Percolation on a Square Lattice with Two Different Sizes of Particles
Kazuhito Shida, Ryoji Sahara, MN Tripathi, Hiroshi Mizuseki and Yoshiyuki Kawazoe
2852-2857 :
Effects of Different Hydroxyapatite Binders on Morphology, Ca/P Ratio and Hardness of Nd-YAG Laser Clad Coatings
C. S. Chien, T. J. Han, T. F. Hong, T. Y. Kuo and T. Y. Liao
2858-2864 :
Constitutive Relation for Ambient-Temperature Creep in Hexagonal Close-Packed Metals
Tetsuya Matsunaga, Tatsuya Kameyama, Kohei Takahashi and Eiichi Sato
2865-2872 :
Intragranular Deformation Mechanisms during Ambient-Temperature Creep in Hexagonal Close-Packed Metals
Tetsuya Matsunaga, Tatsuya Kameyama, Kohei Takahashi and Eiichi Sato
2873-2878 :
New Method for Production of Solar-Grade Silicon by Subhalide Reduction
Kouji Yasuda, Kunio Saegusa and Toru H. Okabe
2879-2884 :
Dye-Sensitized Solar Cells Made with TiO2-Coated Multi-Wall Carbon Nanotubes and Natural Dyes Extracted from Ipomoea
Ho Chang, Tung-Jung Hsieh, Tien-Li Chen, Kouhsiu-David Huang, Ching-Song Jwo and Shu-Hua Chien
2885-2890 :
Precompaction Effects on Density and Mechanical Properties of Al2O3 Nanopowder Compacts Fabricated by Magnetic Pulsed Compaction
S. J. Hong, J. M. Koo, J. G. Lee, M. K. Lee, H. H. Kim and C. K. Rhee
2891-2896 :
Formation Mechanism of Microchannels and Lining Layers in Sintered Iron Powder Compacts with Copper Sacrificial Cores
Tatsuya Ohmi, Takuhiro Kodama and Manabu Iguchi
2897-2899 :
Synthesis of TiN Nanoparticles by Explosion of Ti Wire in Nitrogen Gas
Wonbaek Kim, Je-shin Park, Chang-yul Suh, Sung-wook Cho, Sujeong Lee and In-Jin Shon

[JIM HOME] [JOURNAL ARCHIVES]

© 2009 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp