Vol.50 No.10

Materials Transactions, Vol.50 No.10 (2009)

2347-2350 :: Microstructural Evaluation of Nd-Fe-B Jet-Milled Powders
Takashi Hattori, Hiroki Ishihara, Satoshi Sugimoto, Ryota Goto, Nobuki Tezuka, Yasuhiro Une and Masato Sagawa
2351-2354 :: Effect of Prior Deformation on Creep Behavior of a Die-Cast Mg-Al-Ca Alloy
Yoshihiro Terada, Tomoyuki Enokida and Tatsuo Sato
2355-2358 :: Effect of Pre-Introduced Shear Bands Direction on Deformation Behavior in Zr₅₅Al₁₀Ni₅Cu₃₀ Bulk Metallic Glass
Junpei Kobata, Tsuyoshi Kimura, Yorinobu Takigawa, Tokuteru Uesugi, Hisamichi Kimura and Kenji Higashi
2359-2365 :: Conditions of Electronic Structure to Obtain Large Dimensionless Figure of Merit for Developing Practical Thermoelectric Materials
Tsunehiro Takeuchi
2366-2372 :: Thermally Formed Oxides on Al-2 and 3.5 mass% Mg Alloys Heated and Held in Different Gases
Po-Chen Chen, Teng-Shih Shih and Chin-Yie Wu
2373-2377 :: Molecular Dynamics Simulation of Void Generation during Annealing of Copper Wiring
Takeshiro Nagai, Yasushi Sasajima and Jin Onuki
2378-2383 :: Microstructures and Mechanical Properties in Friction Stir Zone of Thixo-Molded AS41 Mg Alloy
Lina Yu, Kazuhiro Nakata and Jinsun Liao
2384-2390 :: Martensitic Transformation of Ti₅₀Ni_25-XPd_25-YCu_X+Y Quaternary Shape Memory Alloys with X, Y≤q 10 at%
Kai-Nan Lin, Shyi-Kaan Wu and Ling-Mei Wu
2391-2395 :: Axial Compression and Post-Deformation Annealing of < 011> Aluminum Single Crystal
Tatsuya Okada, Atsushi Ikeda, Daiki Noguchi, Takashi Yamahata, Minoru Tagami and Fukuji Inoko
2396-2402 :: The Effect of Preheating on Notch Fracture of Ti-4.5Al-3V-2Fe-2Mo Laser Welds
Leu-Wen Tsay, Yun-Chen Jiang and Chun Chen
2403-2409 :: Effects of Structures of Substrates on Sn Whisker Formation Using Substitutionally-Deposited Sn Films
Naoki Okamoto, Yuko Fujii, Hiroaki Kurihara and Kazuo Kondo
2410-2417 :: Temperature Dependence of Corrosion of Ferritic/Martensitic and Austenitic Steels in Liquid Lead-Bismuth Eutectic
Yuji Kurata and Shigeru Saito
2418-2426 :: Modeling of Elution Curves in Preparative Chromatography Using Anion-Exchange Resin for Cobalt Purification
Masahito Uchikoshi, Tamás Kékesi and Minoru Isshiki
2427-2434 :: Effects of Powder Shape and Processing Parameters on Heat Dissipation of Heat Pipes with Sintered Porous Wicks
Yech-Ju Lin and Kuen-Shyang Hwang
2435-2440 :: Effects of Cr₃C₂ and V₈C₇ on the Microstructure and Mechanical Properties of WC-SiC Whisker Ceramics
Hitoshi Taimatsu, Shigeaki Sugiyama and Masanori Komatsu
2441-2445 :: Ni-Rich Bulk Metallic Glasses with High Glass-Forming Ability and Good Metallic Properties
Yuqiao Zeng, Nobuyuki Nishiyama, Tokujiro Yamamoto and Akihisa Inoue
2446-2450 :: Fabrication of Ti-Ni-Zr Shape Memory Alloy by P/M Process
Akira Terayama, Koji Nagai and Hideki Kyogoku
2451-2454 :: Enhancement of Strength and Corrosion Resistance of Copper Wires by Metallic Glass Coating
P. Yu, K. C. Chan, L. Xia, H. B. Yu and H. Y. Bai
2455-2459 :: Precipitation Behavior in a Hanks' Solution on Ca-P-O Films Prepared by Laser CVD
Mitsutaka Sato, Rong Tu, Takashi Goto, Kyosuke Ueda and Takayuki Narushima
2460-2465 :: Giant Bending Strain of Reversible Motion of Uni-Morph Soft Mover Composites Driven by Hydrogen Storage Alloy Powders Dispersed in Polyurethane Sheet
Yoshitake Nishi, Junya Okawa, Masae Kanda, Akio Shimazu, Ryuichi Suenaga, Yoshihide Ebihara, Daiji Kubo, Haru-Hisa Uchida, Kaori Yuse and Daniel Guyomar
2466-2472 :: Effects of Phase Constitution of Zr-Nb Alloys on Their Magnetic Susceptibilities
Naoyuki Nomura, Yuko Tanaka, Suyalatu, Ryota Kondo, Hisashi Doi, Yusuke Tsutsumi and Takao Hanawa
2473-2475 :: Effect of Tellurium Doping on the Thermoelectric Properties of ZnSb
Takashi Ueda, Chinatsu Okamura, Yasutoshi Noda and Kazuhiro Hasezaki
2476-2483 :: Adsorption of Toxic Gases on Iron-Incorporated Na-A Zeolites Synthesized from Melting Slag
Sung-Ki Lee, Young-Nam Jang, In-Kook Bae, Soo-Chun Chae, Kyoung-Won Ryu and Jong-Kyu Kim
2484-2487 :: Research on TiAl Alloy Porous Metal Flow Restrictors
P. Tan, H. P. Tang, X. T. Kang, Q. B. Wang, J. L. Zhu, C. Li and J. M. Chen
2488-2492 :: Matrix Microstructure and Its Micro-Analysis of Constituent Phases in As-Cast Fe-Cr-C-V Alloys
Mirjana Filipovic, Endre Romhanji, Zeljko Kamberovic and Marija Korac
2493-2497 :: Orientation Characterization of Columnar-Grained Aluminum at Triple Junctions
Chien-Shun Yun, Kuan-Tai Lui and Jui-Chao Kuo
2498-2501 :: Mechanical Properties of Friction-Stir-Welded Inconel 625 Alloy
Kuk Hyun Song and Kazuhiro Nakata
2502-2503 :: Comments on the Paper ``Production of Zr₅₅Cu₃₀Ni₅Al₁₀ Glassy Alloy Rod of 30 mm in Diameter by a Cap-Cast Technique'' (Yoshihiko Yokoyama, Enrico Mund, Akihisa Inoue and Ludwig Schultz, Mater. Trans. 48 (2007) 3190–3192.)
Tsuyoshi Kajitani
2504-2506 :: Reply to Comments by Tsuyoshi Kajitani on Our Paper Titled `Production of Zr₅₅Cu₃₀Ni₅Al₁₀ Glassy Alloy Rod of 30 mm in Diameter by a Cap-Cast Technique (by Y. Yokoyama, et al., Mater. Trans. 48 (2007) 3190–3192)'
Yoshihiko Yokoyama and Akihisa Inoue
2506a :: Production of Zr₅₅Cu₃₀Ni₅Al₁₀ Glassy Alloy Rod of 30 mm in Diameter by a Cap-Cast Technique
Yoshihiko Yokoyama, Enrico Mund, Akihisa Inoue and Ludwig Schultz
2506b :: Editor's Announcement

[JIM HOME] [JOURNAL ARCHIVES]