Materials Transactions, Vol.50 No.6 (2009)

1235-1235 :

PREFACE
Akihisa Inoue, Dmitri V. Louzguine, Mikio Fukuhara, Junji Saida, Toshio Kuroda and Fumihiro Wakai

1236-1239 :

Thermal Stability and Hydrogen Permeation of Ni₄₂Zr₃₀Nb_28-xTa_x Amorphous Alloys
J. B. Qiang, W. Zhang, S. Yamaura and A. Inoue

1240-1242 :

Bulk Metallic Glass-Forming Region of Four Multicomponent Alloy Systems
Ailong Zhang, Ding Chen and Zhenhua Chen
[Erratum]

1243-1246 :

Development of Ni-Pd-P-B Bulk Metallic Glasses with High Glass-Forming Ability
Zeng Yuqiao, Nobuyuki Nishiyama and Akihisa Inoue

1247-1249 :

Heat Capacity and Thermodynamic Functions of Ni₃₆Nb₂₄Zr₄₀ Glassy Alloy
Atsuko Uchida, Hitoshi Kawaji, Tooru Atake, Mikio Fukuhara and Akihisa Inoue

1250-1254 :

Development of Creep-Resistant Tungsten Carbide Copper Cemented Carbide
Yutaka Shinoda, Yuki Yanagisawa, Takashi Akatsu, Fumihiro Wakai and Hidetoshi Fujii

1255-1258 :

Dealloying of Cu-Zr-Ti Bulk Metallic Glass in Hydrofluoric Acid Solution
Hiroya Abe, Kazuyoshi Sato, Hiroshi Nishikawa, Tadashi Takemoto, Mikio Fukuhara and Akihisa Inoue

1259-1262 :

Microstructure of Bonding Interface for Resistance Welding of Zr-Based Metallic Glass Sheets
Toshio Kuroda, Kenji Ikeuchi, Masahiro Shimada, Akira Kobayashi, Hisamichi Kimura and Akihisa Inoue

1263-1268 :

Interfacial Microstructure and Thermal Stability of Zr₅₅Cu₃₀Ni₅Al₁₀ Metallic Glass Joints Formed by Ultrasonic Bonding
Masakatsu Maeda, Takao Yamasaki, Yasuo Takahashi and Akihisa Inoue

1269-1272 :

Improvement of Biocompatibility of Chitosan Fiber Modified by Ca-Phosphate Deposition through an Alternate Soaking Process
Tomohiko Yoshioka, Hiroshi Onomoto, Haruhiko Kashiwazaki, Nobuo Inoue, Yoshihisa Koyama, Kazuo Takakuda and Junzo Tanaka

1273-1278 :

Densification of Gas Atomized Ni-Based Metallic Glassy Powders by Spark Plasma Sintering
Guoqiang Xie, Dmitri V. Louzguine-Luzgin, Song Li, Hisamichi Kimura and Akihisa Inoue

1279-1285 :

Interfacial Microstructure of Aluminum/Metallic Glass Lap Joints Fabricated by Magnetic Pulse Welding
Mitsuhiro Watanabe, Shinji Kumai, Go Hagimoto, Qingsheng Zhang and Koji Nakayama

1286-1289 :

Mechanical Properties of Soft Magnetic (Fe_0.76Si_0.096B_0.084P_0.06)_100-xCu_x (x = 0 and 0.1) Bulk Glassy Alloys
Xue Li, Akihiro Makino, Kunio Yubuta, Hidemi Kato and Akihisa Inoue

1290-1293 :

Glass-Forming Ability and Properties of New Au-Based Glassy Alloys with Low Au Concentrations
Hai Guo, Wei Zhang, Chunling Qin, Jianbin Qiang, Mingwei Chen and Akihisa Inoue

1294-1299 :

Composition Dependence of Titanium in Silver-Copper-Titanium Alloy Braze on Dissimilar Laser Brazing of Boron Nitride Ceramics and Cemented Carbide
Yoshihisa Sechi, Akio Takezaki, Taihei Matsumoto, Takuya Tsumura and Kazuhiro Nakata

1300-1303 :

Friction Stir Welding of Zr₅₅Cu₃₀Ni₅Al₁₀ Bulk Metallic Glass
Young Su Ji, Hidetoshi Fujii, Yufeng Sun, Masakatsu Maeda, Kazuhiro Nakata, Hisamichi Kimura, Akihisa Inoue and Kiyoshi Nogi

1304-1307 :

High Corrosion Resistant Ni-Based Glassy Alloys in Boiling Nitric Acid Solutions
C. L. Qin, K. Asami, H. Kimura, W. Zhang, D. V. Louzguine and A. Inoue

1308-1312 :

Interface Structure between Ti-Based Bulk Metallic Glasses and Hydroxyapatite Ceramics Jointed by Hydrothermal Techniques
Takamasa Onoki, Taisuke Higashi, Xinmin Wang, Shengli Zhu, Naota Sugiyama, Yasuto Hoshikawa, Masaru Akao, Nobuhiro Matsushita, Atsushi Nakahira, Eiichi Yasuda, Masahiro Yoshimura and Akihisa Inoue

1313-1317 :

Microstructure and Electrochemical Properties of PVD TiN, (Ti, Al) N-Coated Ti-Based Bulk Metallic Glasses
F. X. Qin, G. Q. Xie, X. M. Wang, T. Wada, M. Song, K. Furuya, M. Yoshimura, M. Tsukamoto and A. Inoue

1318-1321 :

Effect of Oxide Layers of Ni-Free Stainless-Steel on Silane Coupling Agent Immobilization
Masaru Soya, Tomohiko Yoshioka, Kazuo Shinozaki and Junzo Tanaka

1322-1325 :

Development of W-Reinforced Zr-Based Metallic Glass
Takeshi Terajima, Kazuhiro Nakata, Hisamichi Kimura and Akihisa Inoue

1326-1329 :

Solderability of Bulk Metallic Glasses Using Lead-Free Solders
Hiroshi Nishikawa, Krit WongPiromsarn, Hiroya Abe, Tadashi Takemoto, Mikio Fukuhara and Akihisa Inoue

1330-1333 :

Fe-Rich Soft Magnetic FeSiBPCu Hetero-Amorphous Alloys with High Saturation Magnetization
Men He, Liying Cui, Takeshi Kubota, Kunio Yubuta, Akihiro Makino and Akihisa Inoue

1334-1339 :

Enhancement of Corrosion Resistance of Titanium-Copper Based Metallic Glass by Methylsiloxane Coating
Yasuto Hoshikawa, Eiichi Yasuda, Takashi Akatsu, Toru Onoda, Naota Sugiyama, Nobuhiro Matsushita, Takamasa Onoki, Masaru Akao, Yasuhiro Tanabe, Masahiro Yoshimura, Shengli Zhu, Xinmin Wang and Akihisa Inoue

1340-1345 :

Crystallization Behavior and Structural Stability of Zr₅₀Cu₄₀Al₁₀ Bulk Metallic Glass
Shuo Zhang, Tetsu Ichitsubo, Yoshihiko Yokoyama, Tokujiro Yamamoto, Eiichiro Matsubara and Akihisa Inoue

1346-1350 :

The Oxygen Partial Pressure on the Surface of Na₂O-SiO₂ Molten Glass Heated by Thermal Plasma of Ar
Keiichiro Kashimura and Kazuhiro Nagata

1351-1354 :

Facile Synthesis of α-Fe₂O₃ Nanostructured Films with Controlled Morphology
Qing Wei, Zhengcao Li, Zhengjun Zhang and Qin Zhou

1355-1359 :

Interface-Dependent Mechanical Properties in MWNT-Filled Polycarbonate
Y. H. Man, Z. C. Li and Z. J. Zhang

1360-1369 :

Sulfide Precipitation in Titanium-Added Steel with Residual Level of Copper (1) —Precipitation in Austenite Region—
Yasuhide Ishiguro, Takashi Murayama, Takeshi Fujita and Kotaro Kuroda

1370-1379 :

Sulfide Precipitation in Titanium-Added Steel with Residual Level of Copper (2) —Precipitation in Ferrite Region—
Yasuhide Ishiguro, Takashi Murayama, Takeshi Fujita and Kotaro Kuroda

1380-1389 :

Sulfide Precipitation in Titanium-Added Steel with Residual Level of Copper (3) —Decrease of Copper Sulfide by Long-Time-Annealing in Ferrite Region—
Yasuhide Ishiguro, Takashi Murayama, Takeshi Fujita and Kotaro Kuroda

1390-1395 :

Effect of Heat Treatment on the Damping Capacity of Austempered Ductile Cast Iron
Chang-Yong Kang, Jang-Hyun Sung, Gwang-Ho Kim, Byoung-Suhk Kim and Ick-Soo Kim

1396-1403 :

An Investigation into the Effective Heat Transfer Coefficient in the Casting of Aluminum in a Green-Sand Mold
Hsien-Chi Sun and Long-Sun Chao

1404-1410 :

The Effect of Trace Addition of Strontium and Zinc on the Creep Properties of Mg-6Sn-5Al-2Si Alloys
Jong Jin Jeon, Bong Gyu Park, Yong Ho Park, Ik Min Park, Jeong Jung Oak and Hisamichi Kimura

1411-1417 :

Creep Behavior of In Situ Synthesized 7715D Titanium Matrix Composite
Pan Wang, Jining Qin, Weijie Lu and Yifei Chen

1418-1425 :

Effects of the Strain Rate and Alloying on the Compression Characteristics of Closed Cell Aluminum Foams
Takeshi Hamada, Hidetaka Kanahashi, Tetsuji Miyoshi and Naoyuki Kanetake

1426-1432 :

Effects of Eutectic Compounds Formed along Grain Boundaries in Thixomolded^® Alloy Mg₉₆Zn₂Y₂ on Creep Deformation
Akihiro Shibata, Mayumi Suzuki and Kouichi Maruyama

1433-1439 :

Corrosion Phenomenon and Its Analysis of 6063 Aluminum Alloy in Ethyl Alcohol
Osami Seri and Yasuhiro Kido

1440-1447 :

A Study on Corrosion Behavior of DP-Type and TRIP-Type Cold Rolled Steel Sheet
Il-Jeong Park, Soon-Tae Kim, In-Sung Lee, Yong-Soo Park and Man Been Moon

1448-1456 :

Effects of Basicity and FeO Content on the Softening and Melting Temperatures of the CaO-SiO₂-MgO-Al₂O₃ Slag System
Hsin-Chien Chuang, Weng-Sing Hwang and Shih-Hsien Liu

1457-1461 :

Activity Coefficient of AgO_0.5 in PbO-NaO_0.5 and PbO-CaO Melts at 1273 K
Shigeru Ueda, Tomomasa Kumagai and Katsunori Yamaguchi

1462-1466 :

Effect of Blending Ratio of Steel Can Pellets without Cap on Mechanical Properties of Spheroidal Graphite Cast Iron
Katsumi Koike and Satoshi Akita

1467-1476 :

Effects of Operating Parameters on Modification of Primary Mg₂Si Crystals in Hypereutectic Mg-Si Alloy Treated by Imposition of Alternating Current
Jun Du and Kazuhiko Iwai

1477-1481 :

Fabrication of Lotus-Type Porous Aluminum Utilizing Decomposition of Moisture
Masakazu Tane and Hideo Nakajima

1482-1488 :

Deposition of Copper Fine Particle by Cold Spray Process
Masahiro Fukumoto, Hiroki Terada, Masahiro Mashiko, Kazunori Sato, Motohiro Yamada and Eiji Yamaguchi

1489-1492 :

Glass Formation in a Ni-Based Multicomponent Alloy by Mechanical Milling and Microwave Treatment of The Obtained Powders
Song Li, Guoqiang Xie, Dmitri V. Louzguine-lugzin, Motoyasu Sato and Akihisa Inoue

1493-1498 :

Structure Control of an Aluminum Alloy Using an Alternating Current Imposition during Its Pouring
Kazuhiko Iwai and Jun Wan

1499-1501 :

Thermal Relaxation of Residual Stresses in Shot Peened Surface Layer on TiB₂/Al Composite at Elevated Temperatures
Weizhi Luan, Chuanhai Jiang and Vincent Ji

1502-1509 :

Effect of Gas Bottom Blowing Condition on Mixing Molten Iron and Slag inside Ironmaking Smelter
Chau-Jeng Su, Jaw-Min Chou and Shih-Hsien Liu

1510-1518 :

Influence of Fiber Surface Structure on Interfacial Structure between Fiber and Matrix in Vapor Grown Carbon Fiber Reinforced Aluminum Matrix Composites
Kuang-Chih Chang, Zhe-Feng Xu, Kazuhiro Matsugi and Gen Sasaki

1519-1525 :

Effects of Homogeneous Irradiation of Electron Beam with Low Potential on Microscopic Fracture Resistance of Borosilicate Glass Surface
Keisuke Iwata and Yoshitake Nishi

1526-1530 :

Formation, Thermal Stability and Mechanical Properties of Ni₆₀Zr₂₀Nb₁₅Al_5-xPd_x (x = 0∼5 at%) Bulk Metallic Glasses
J. B. Qiang, W. Zhang and A. Inoue

1531-1535 :

Effect of C₂H₂/N₂ Ratio on Tribological and Mechanical Behavior of Carbon Nanotube Containing Brake Lining Materials Prepared through CVD Process
Kuo-Jung Lee, Mao-Hsiang Hsu, Huy-Zu Cheng and Jason Shian-Ching Jang

1536-1540 :

Novel Evaluation Method of Elemental Recyclability from Urban Mine —Concept of Urban Ore TMR—
Eiji Yamasue, Ryota Minamino, Takeshi Numata, Kenichi Nakajima, Shinsuke Murakami, Ichiro Daigo, Seiji Hashimoto, Hideyuki Okumura and Keiichi N. Ishihara

1541-1547 :

Continuous Treatment of Bisphenol A and Diethyl Phthalate Solutions Using Dodecylsulfate-Intercalated Mg-Al Layered Double Hydroxide Particles Packed in Column
Tomohito Kameda, Masami Saito and Yoshiaki Umetsu

1548-1552 :

Effects of Heat Treatment on the Phase Ratio and Corrosion Resistance of Duplex Stainless Steel
Heejoon Hwang and Yongsoo Park

1553-1557 :

Experimental Measurement of Coefficient of Thermal Expansion for Graded Layers in Ni-Al₂O₃ FGM Joints for Accurate Residual Stress Analysis
Sae-hee Ryu, Jong-ha Park, Caroline Sunyong Lee, Jae-chul Lee, Sung-hoon Ahn and Sung-tag Oh

1558-1562 :

A High Temperature Process for Extracting Valuable Metals from Waste Electric and Electronic Scraps (WEES)
Byung-Su Kim, Jae-chun Lee, Jinki Jeong, Seongwon Kang and Kwang-Ho Lee

1563-1571 :

Modification of Kolmogorov-Johnson-Mehl-Avrami Equation for Clustered Nucleation
Kenjiro Sugio, Shohei Tatsuno, Hiroshi Fukushima and Osamu Yanagisawa

1572-1575 :

Precise Resistivity Measurement of Submicrometer-Sized Materials by Using TEM with Microprobes
N. Kawamoto, Y. Murakami, D. Shindo, H. Azehara and H. Tokumoto

1576-1578 :

Yield-Point Phenomena of Ti-20V-4Al-1Sn at 1073 K and Its Constitutive Modelling
X. Wang, H. Hamasaki, M. Yamamura, R. Yamauchi, T. Maeda, Y. Shirai and F. Yoshida

1579-1579 :

Mechanical Characteristics of Nanocrystalline (ZrO₂·20 mol%Y₂O₃)₈₀(Al₂O₃)₂₀ Synthesized via Pulse Electric Current Consolidation of the Amorphous Powder
Hiroshi Kimura and Takashi Uchino

© 2009 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp