Materials Transactions Online

Materials Transactions, Vol.50 No.3 (2009)

431-435 :
Preparation of Nanoporous Palladium by Dealloying: Anodic Polarization Behaviors of Pd-M (M=Fe, Co, Ni) Alloys
Masataka Hakamada and Mamoru Mabuchi
436-445 :
Tensile Characterization of Carbon Nanotube-Reinforced Polymer Composites at Cryogenic Temperatures: Experimens and Multiscale Simulations
Tomo Takeda, Yasuhide Shindo, Fumio Narita and Yuya Mito
446-452 :
Tensile Deformation and Recrystallization in Copper Single Crystal and Bicrystal with Schmid Factor of 0.5
Tatsuya Okada, Hiroshi Kinoshita, Minoru Tagami and Fukuji Inoko
453-460 :
Evaluation Method of Metal Resource Recyclability Based on Thermodynamic Analysis
Kenichi Nakajima, Osamu Takeda, Takahiro Miki and Tetsuya Nagasaka
461-466 :
Development of Magnetic-Field-Driven Micro-Gas Valve
Teiko Okazaki, Masamune Tanaka, Naoki Ogasawara, Yasubumi Furuya, Chihiro Saito and Nobuo Imaizumi
467-472 :
Overweight of Nylon6 Composites Dispersed with Aluminum Powders by Dipping in Hot Salt Solution (3 mass%NaCl in Distilled Water)
Ryuichi Suenaga, Alain Vautrin and Yoshitake Nishi
473-478 :
Isothermal Martensitic Transformation in Sensitized SUS304 Austenitic Stainless Steel at Cryogenic Temperature
Jae-hwa Lee, Takashi Fukuda and Tomoyuki Kakeshita
479-482 :
Microstructural Evaluation of Nd-Fe-B Strip Cast Alloys
Takashi Hattori, Nana Fukamachi, Ryota Goto, Nobuki Tezuka and Satoshi Sugimoto
483-486 :
Strong Pressure Effect on the Curie Temperature of Itinerant-Electron Metamagnetic La(Fe0.88Si0.12)13Hy and La0.7Ce0.3(Fe0.88Si0.12)13Hy
Shun Fujieda, Asaya Fujita and Kazuaki Fukamichi
487-489 :
Preparation of Bulk Glassy Fe76Si9B10P5 as a Soft Magnetic Material by Spark Plasma Sintering
Zhankui Zhao, Chuntao Chang, Akihiro Makino, Akira Okubo and Akihisa Inoue
490-493 :
Displacement Behavior Study of the Shear Stress Effect on the Early Viscous Flow Nature of Fe-B-Nb-Y Metallic Glassy Powder in Spark Plasma Sintering
Sangmin Lee, Hidemi Kato, Akihiro Makino and Akihisa Inoue
494-498 :
Grain Size Refinements of Au-Mg Alloy by Hydrogen Absorption/Desorption Treatments
Yugo Takeda, Takahiro Kuriiwa, Atsunori Kamegawa and Masuo Okada
499-505 :
Grain-Size Refinements of Cu-3 mass%Ti Alloys by HDDR Treatments in Correlating with Their Electrical and Mechanical Properties
Toru Iwaki, Takahiro Kuriiwa, Atsunori Kamegawa, Hitoshi Takamura and Masuo Okada
506-508 :
Preparation of Integrated Oxygen Permeable Membranes with a Porous Layer by Partial Reduction Process
Hiroo Takahashi and Hitoshi Takamura
509-515 :
What is the Interaction between Atomically Dispersed Ni and Oxide Surfaces?
Yuichiro Koike, Wang-Jae Chun, Kaoru Ijima, Shushi Suzuki and Kiyotaka Asakura
516-522 :
Fe/Ni Cluster Hybrid Material Produced by Double Glow Discharge Sources
Kenji Sumiyama, Atsushi Monden, Ryoji Katoh, Naokage Tanaka, Dong-Liang Peng and Takehiko Hihara
523-527 :
Core/Shell Morphology in Ti Clusters Prepared by Plasma Gas Condensation and Post Annealing
Naokage Tanaka, Subhajit Sarkar, Kenji Sumiyama, Dong-Liang Peng and Takehiko Hihara
528-536 :
Effect of Precipitation on Development of Recrystallization Texture in a 6061 Aluminum Alloy
K. Kashihara and H. Inagaki
537-543 :
Evolution of Rolling Textures of Cold Rolled Copper Foils
Su-Hyeon Kim, Seung Zeon Han, Chang Joo Kim, In-Youb Hwang and Fuxing Yin
544-550 :
Microstructure and Notch Properties of Heat-Treated Ti-4.5Al-3V-2Mo-2Fe Laser Welds
Wei-Chih Chung, Leu-Wen Tsay and Chun Chen
551-555 :
Prediction of Bainite Intervened in Ferrite-Pearlite Forging Steel I. Modeling
Kouji Tanaka, Yasuhiro Yogo, Koukichi Nakanishi and Carlos Capdevila
556-561 :
Prediction of Bainite Intervened in Ferrite-Pearlite Forging Steel II. Experimental Evaluation
Kouji Tanaka, Masashi Hara, Koukichi Nakanishi and Carlos Capdevila
562-569 :
Modification of Primary Mg2Si Crystals in Hypereutectic Mg-Si Alloy by Application Alternating Current
Jun Du and Kazuhiko Iwai
570-578 :
Effect of Annealing on Mechanical Properties and Nanoscale Lamellar Structure in Co-Cu Alloy
Motohiro Yuasa, Hiromi Nakano, Yoshiaki Nakamoto and Mamoru Mabuchi
579-587 :
Effects of Solute Segregation on Precipitation Phenomena and Age Hardening Response of High-Purity and Commercial AZ91 Magnesium Alloys
Yosuke Tamura, Yusaku Kida, Ayumi Suzuki, Hiroshi Soda and Alexander McLean
588-591 :
Spark Plasma Sintering of Mg-Based Amorphous Ball-Milled Powders
François O. Méar, Guoqiang Xie, Dmitri V. Louzguine-Luzgin and Akihisa Inoue
592-598 :
Influence of Overaging on the Superplastic Behavior of an Al-Zn-Mg-Cu-Zr-Sc Alloy
Yi-Yun Li, Wen-Hsiung Wang, Yung-Fu Hsu, You-Luen Chang and Shan Trong
599-604 :
Detection and Identification of the Latent Microorganisms in the Altered Layers of Ancient Bronze Mirrors
Masaru Yokota, Misako Tochihara, Masao Tanaka, Naoto Iijima, Yasuhiro Konishi, Takekazu Nagae, Haruhisa Mifune, Fuminori Sugaya and Yasuzi Shimizu
605-609 :
Formation of Hydroxyapatite on Ti-Coated Ti-Zr-Cu-Pd Bulk Metallic Glass
F. X. Qin, X. M. Wang, T. Wada, G. Q. Xie, K. Asami and A. Inoue
610-617 :
Development of Fine-Grained Structure Caused by Friction Stir Welding Process of a ZK60A Magnesium Alloy
Sergey Mironov, Yoshinobu Motohashi, Rustam Kaibyshev, Hidetoshi Somekawa, Toshiji Mukai and Kaneaki Tsuzaki
618-621 :
Concentration Behavior of Non-Metallic Impurities in Cu Rods Refined by Argon and Hydrogen Plasma-Arc Zone Melting
G. M. Lalev, J.-W. Lim, N. R. Munirathnam, G.-S. Choi, M. Uchikoshi, K. Mimura and M. Isshiki
622-630 :
Effect of Temperature Ranges of Alternating Current Imposition on Modification of Primary Mg2Si Crystals in Hypereutectic Mg-Si Alloy
Jun Du and Kazuhiko Iwai
631-639 :
Study of Zn-Substituted Germanium Clathrates as High Performance Thermoelectric Materials Assisted by First-Principles Electronic Structure Calculation
Takeshi Eto, Kengo Kishimoto, Kenji Koga, Koji Akai, Tsuyoshi Koyanagi, Hiroaki Anno, Terumitsu Tanaka, Hiroki Kurisu, Setsuo Yamamoto and Mitsuru Matsuura
640-643 :
Positive Deviation from a Hall-Petch Relation in Nanocrystalline Aluminum
H. J. Choi, S. W. Lee, J. S. Park and D. H. Bae
644-649 :
Triboelectrostatic Separation for Recycling of Seaweed-Drying Net Frame Plastic Wastes
Chul-Hyun Park and Ho-Seok Jeon
650-656 :
Assessment of the Recycling Potential of Aluminum in Japan, the United States, Europe and China
Hiroki Hatayama, Ichiro Daigo, Yasunari Matsuno and Yoshihiro Adachi
657-663 :
Corrosion Fatigue Behavior of Cold-Worked 304L Stainless Steel in a Simulated BWR Coolant Environment
M. C. Young, J. Y. Huang and R. C. Kuo
664-670 :
High Frequency Magnetic Property of Dense Fe22Ni78 Cluster Assembled Films
Kengo Kumagai, Takeshi Yamabuchi, Dong-Liang Peng, Kenji Sumiyama, Ryoji Katoh and Takehiko Hihara
671-678 :
Corrosion Resistance of Plasma-Anodized AZ91 Mg Alloy in the Electrolyte with/without Potassium Fluoride
Duck Y. Hwang, Yong M. Kim and Dong H. Shin
679-682 :
Formation and Mechanical Properties of New Cu-Rich Cu-Zr-Al-Ag Glassy Alloys with High Glass-Forming Ability
Wei Zhang, Qingsheng Zhang and Akihisa Inoue
683-688 :
Phase Transitions and Thermal Expansion Behavior in AuCu Alloy
Teruo Anraku, Iwao Sakaihara, Takeshi Hoshikawa and Masafumi Taniwaki
689-694 :
Deposition of Multicomponent Alloys on Low-Carbon Steel Using Gas Tungsten Arc Welding (GTAW) Cladding Process
Jie H. Chen, Pei N. Chen, Pei H. Hua, Ming C. Chen, Yin Y. Chang and Weite Wu
695-701 :
The Changes in Surface Properties of the Calcite Powder with Stearic Acid Treatment
Young-Cheol Yang, Soo-Bok Jeong, Shi-Young Yang, Young-Bae Chae and Hyung-Seok Kim

[JIM HOME] [JOURNAL ARCHIVES]

© 2009 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp