Vol.50 No.2

Materials Transactions, Vol.50 No.2 (2009)

229-235 :: High Temperature Grain Boundary Plasticity in Ceramics
Taketo Sakuma and Hidehiro Yoshida
236-244 :: Non-Equilibrium Thermodynamic Theory of 4-Component Lead-Free Solder
Kenichiro Suetsugu, Atsushi Yamaguchi, Kazumi Matsushige and Toshihisa Horiuchi
245-248 :: Dielectric Properties of Ba_1-xCa_xTi₂O₅ Prepared by Arc Melting
Xinyan Yue, Rong Tu and Takashi Goto
249-253 :: Theory of Instability Phenomena and Its Application to Melting of Cubic Metals
Yutaka Aikawa and Katsuhiko Fujii
254-260 :: Evaluation of Phase Diagrams for the Al₂O₃-CaO-SrO System by In-Situ Observation Using Confocal Laser Microscope
Tomonori Kuroki, Yoshitoshi Saito, Taijiro Matsui and Kazuki Morita
261-265 :: Microstructure Evolution in the Rolled Mg₉₇Zn₁Y₂ Alloy with Long-Period Stacking Phase upon Annealing
Baishu Wang, Yongbing Liu, Zhenguo Su and Zhanyi Cao
266-274 :: Influence of Ag on Kinetics of Solid-State Reactive Diffusion between Pd and Sn
Taro Sakama and Masanori Kajihara
275-279 :: Characteristics of Retained Austenite in Quenched High C-High Cr Alloy Steels
Muneo Yaso, Shuhei Hayashi, Shigekazu Morito, Takuya Ohba, Kunichika Kubota and Kouji Murakami
280-285 :: In-Situ Observation of Grain Growth of Steel at High Temperature
Yasuhiro Yogo, Kouji Tanaka and Koukichi Nakanishi
286-292 :: Interfacial Morphology of Magnetic Pulse Welded Aluminum/Aluminum and Copper/Copper Lap Joints
Mitsuhiro Watanabe and Shinji Kumai
293-298 :: Electric Flame-Off Characteristics and Fracture Properties of 20 μm Thin Copper Bonding Wire
Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Yi-Chang Lin
299-304 :: Postbuckling Behavior of Composite Laminated Plates with Initial Imperfections under Biaxial Compression
Keiichi Nemoto, Hirakazu Kasuya, Hisao Kikugawa and Takashi Asaka
305-312 :: Effect of Different Preservative Methods on Fracture Behavior of Bovine Cortical Bone
Masahiro Kuninori, Hisao Kikugawa, Takashi Asaka and Hirakazu Kasuya
313-320 :: Pop-in Crack Propagation Monitoring for AA2024-T3 Ductile Alloy
H. C. Lin, T. Y. Kuo and H. T. Lee
321-331 :: Immobilization of Arsenic from Novel Synthesized Scorodite—Analysis on Solubility and Stability
Tetsuo Fujita, Ryoichi Taguchi, Hisashi Kubo, Etsuro Shibata and Takashi Nakamura
332-334 :: Effect of O₂ Pretreatment on Fluorinated Carbon Film Surfaces
Mi Ryn Seong, Gye Young Lee, Si Hyeong Cho, Hyun Woo Lim, Jin Goo Park and Caroline Sunyong Lee
335-340 :: Effect of the Electrodeposition Temperature on the Cyclic-Oxidation Resistance of Ni Aluminide Containing Zr Formed by Molten-Salt Electrodeposition
Michihisa Fukumoto, Takashi Suzuki, Motoi Hara and Toshio Narita
341-348 :: Simultaneous Determination of the Composition and Size of Oxide Particles in Solid Materials by Laser Ablation-Inductively Coupled Plasma Mass Spectrometry
Andrey V. Karasev and Ryo Inoue
349-353 :: Microstructures and Mechanical Properties of Mg₉₆Zn₂Y₂ Alloy Prepared by Extrusion of Machined Chips
Syuichi Fudetani, Takaomi Itoi, Tetsuo Kubo, Yoshihito Kawamura and Mitsuji Hirohashi
354-360 :: Effect of Strontium, Magnesium and Iron Content on Mechanical Properties of Rheocast Al-7 mass%Si-Mg Alloys
Satoru Sato, Yasunori Harada, Naoki Ishibashi and Mitsuru Adachi
361-367 :: Effects of Process Conditions of Melting Furnace on Alkali-Free Glass Cleanliness
Chien-Chih Yen, Meng-Chun Wu and Weng-Sing Hwang
368-372 :: Effects of Nd Content on the Dynamic Elastic Modulus and Mechanical Properties of Titanium-Neodymium Alloys
Ying-Long Zhou and Mitsuo Niinomi
373-380 :: Effect of Microscopic Internal Structure on Sound Absorption Properties of Polyurethane Foam by X-ray Computed Tomography Observations
Tsuyoshi Yamashita, Kazuhiro Suzuki, Hideki Adachi, Souichiro Nishino and Yo Tomota
381-387 :: Microstructural Characteristics and the Charge-Discharge Characteristics of Sn-Cu Thin Film Materials
Chao-Han Wu, Fei-Yi Hung, Truan-Sheng Lui and Li-Hui Chen
388-394 :: Formation, Thermal Stability and Mechanical Properties of Bulk Glassy Alloys with a Diameter of 20 mm in Zr-(Ti,Nb)-Al-Ni-Cu System
A. Inoue, Q. S. Zhang, W. Zhang, K. Yubuta, K. S. Son and X. M. Wang
395-400 :: Effects of HIP Treatment on the Microstructure and Properties of Cr35-Si65 Target
Chung-Hung Tam, Shih-Chin Lee, Shih-Hsien Chang and Fong-Cheng Tai
401-408 :: The Effect of Ultrasonic Treatment on Microstructural and Mechanical Properties of Cast Magnesium Alloys
Yeong-Jern Chen, Wen-Nong Hsu and Jhih-Ren Shih
409-414 :: Characteristics of the Treated Ground Calcium Carbonate Powder with Stearic Acid Using the Dry Process Coating System
Soo-Bok Jeong, Young-Cheol Yang, Young-Bae Chae and Byoung-Gon Kim
415-418 :: Ti-Coated Al₂O₃ Balls Prepared by Fine Particle Bombardment and Their Reductive Properties
Daigo Yamaguchi, Shigeru Suzuki and Jin Mizuguchi
419-422 :: Ferromagnetic Properties of Co-Cu Alloy with Nanoscale Lamellar Structure
Motohiro Yuasa, Hiromi Nakano, Yoshiaki Nakamoto, Masataka Hakamada and Mamoru Mabuchi
423-426 :: Anomalous Thermal Expansion of Cold-Rolled Ti-Nb-Ta-Zr Alloy
Masaaki Nakai, Mitsuo Niinomi, Toshikazu Akahori, Harumi Tsutsumi, Xiaoliang Feng and Michiharu Ogawa
427-429 :: Effects of Pore Characteristics Finely-Controlled by Spacer Method on Damping Capacity of Porous Aluminum
Masataka Hakamada, Hiroyuki Watanabe, Tetsunume Kuromura, Youqing Chen, Hiromu Kusuda and Mamoru Mabuchi

[JIM HOME] [JOURNAL ARCHIVES]