Materials Transactions, Vol.49 No.12 (2008)

2755-2760 :

Characteristic Structural Changes in Stress-Induced Martensitic Transformation and Reverse Transformation of a Polycrystalline Fe-Mn-Si Alloy
Shigeru Suzuki, Shotaro Senoo, Tadakatsu Maruyama and Kozo Shinoda

2761-2764 :

Fe_74.5-xCu_xV₃Si_13.5B₉ as-Spun Ribbons Prepared by Melt-Spinning Technique
Hongwei Qin, Jifan Hu, Bo Li, Ming Zhao, Xing Liu and Juan Chen

2765-2769 :

Ab Initio Electronic Structure Study of α-Zirconium and Hydrogen
Misako Iwasawa, Toshiharu Ohnuma and Naoki Soneda

2770-2775 :

In-Situ SEM/EBSD Observation of α/γ Phase Transformation in Fe-Ni Alloy
Tatsuya Fukino and Sadahiro Tsurekawa

2776-2780 :

The Effect of Thermal Cycling on B2→B19→B19' Transformations of Ti₅₀Ni₄₀Cu₁₀ Shape Memory Alloy by Dynamic Mechanical Analyzer
Kai-Nan Lin, Shyi-Kaan Wu and Chia-Liang Tsai

2781-2785 :

Prediction of Thermal Conductivity of Composites with Spherical Microballoons
Yong Kuk Park, Jin-Gon Kim and Jae-Kon Lee

2786-2791 :

Evaluation of Tensile Strength and Fatigue Strength of Commercial Pure Aluminum/Tough Pitch Copper Friction-Welded Joints by Deformation Heat Input
Hiizu Ochi, Yoshiaki Yamamoto, Takashi Yamazaki, Takeshi Sawai, Gosaku Kawai and Koichi Ogawa

2792-2800 :

Origin of the Anomalous {1012} Twinning during Tensile Deformation of Mg Alloy Sheet
J. Koike, Y. Sato and D. Ando

2801-2807 :

The Flexural and Tribological Behavior of Multi-Walled Carbon Nanotube–Reinforced Polyphenylene Sulfide Composites
Minhaeng Cho

2808-2814 :

Changes in Microstructure of Al/AlN Interface during Thermal Cycling
Yoshiyuki Nagatomo, Takeshi Kitahara, Toshiyuki Nagase, Yoshirou Kuromitsu, Harini Sosiati and Noriyuki Kuwano

2815-2822 :

Heat Treatment for the Stabilization of Hydrogen and Vacancies in Electrodeposited Ni-Fe Alloy Films
Nagatsugu Mukaibo, Yasuo Shimizu, Yuh Fukai and Toshiaki Hiroi

2823-2828 :

Solvent Extraction of PtCl₄ from Hydrochloric Acid Solution with Alamine336
Man Seung Lee, Jin Young Lee, J. Rajesh Kumar, Joon Soo Kim and Jeong Soo Sohn

2829-2836 :

Mechanism of Generation and Growth of Whiskers on Tin Electroplating
Koji Murakami, Makoto Hino, Masao Takamizawa and Kiyomichi Nakai

2837-2843 :

Surface Hardening of Cast Irons by Friction Stir Processing
Hidetoshi Fujii, Yasufumi Yamaguchi, Shoji Kiguchi and Kiyoshi Nogi

2844-2849 :

Weldability of Nickel-Free Austenitic Stainless Steel Thin Sheet by Small-Scale Resistance Spot Welding
Shinji Fukumoto, Taiju Matsuo, Daisuke Kuroda and Atsushi Yamamoto

2850-2853 :

Microwave Sintering of Ni-Based Bulk Metallic Glass Matrix Composite in a Single-Mode Applicator
Song Li, Guoqiang Xie, Dmitri V. Louzguine-Luzgin, Ziping Cao, Noboru Yoshikawa, Motoyasu Sato and Akihisa Inoue

2854-2860 :

Mechanical Characteristics of Nanocrystalline (ZrO₂·20 mol%Y₂O₃)₈₀(Al₂O₃)₂₀ Synthesized via Pulse Electric Current Consolidation of the Amorphous Powder
Hiroshi Kimura and Takashi Uchino
[Erratum]

2861-2867 :

Theoretical and Experimental Investigations of Transmission Coefficients of Longitudinal Waves through Metal Plates Immersed in Air for Uses of Air Coupled Ultrasounds
Hideo Nishino, Shuichi Masuda, Kenichi Yoshida, Masakazu Takahashi, Hidekazu Hoshino, Yukio Ogura, Hideaki Kitagawa, Junichi Kusumoto and Akihiro Kanaya

2868-2874 :

Thermoelectric Properties of Solution Combustion Synthesized Al-Doped ZnO
Lihua Zhang, Tsuyoshi Tosho, Noriyuki Okinaka and Tomohiro Akiyama

2875-2880 :

Bonding Technique Using Micro-Scaled Silver-Oxide Particles for In-Situ Formation of Silver Nanoparticles
Toshiaki Morita, Yusuke Yasuda, Eiichi Ide, Yusuke Akada and Akio Hirose

2881-2886 :

Properties of Soldering Cu/Fe Alloy Produced by Powder Metallurgy
Hidekazu Sueyoshi, Ryosuke Ishii, Hisayoshi Fukudome, Shinji Mizokuchi, Toshio Wakabayashi and Kazuya Saikusa

2887-2890 :

Effect of Cr Addition on the Glass-Forming Ability, Magnetic, Mechanical and Corrosion Properties of (Fe_0.76Si_0.096B_0.096P_0.048)_100-xCr_x Bulk Glassy Alloys
Xue Li, Chuntao Chang, Takeshi Kubota, Chunling Qin, Akihiro Makino and Akihisa Inoue

2891-2894 :

Preparation of Single Phase β-Zn₄Sb₃ Thermoelectric Materials by Two-Stage Heat Treatment[Article Retracted]
Takashi Ueda, Chinatsu Okamura and Kazuhiro Hasezaki

2895-2898 :

Effect of Oxygen on Hydrogen Outgassing Process from Palladium Hydride
Shuji Harada, Hiroyuki Tanaka, Hideaki Araki and Minoru Kubota

2899-2906 :

Effects of Initial Punch-Die Clearance in Spark Plasma Sintering Process
Salvatore Grasso, Yoshio Sakka and Giovanni Maizza

2907-2911 :

Microstructure and Electrical Property of Sputtered Cr-Mo Thin Films
Hideo Murata and Takuya Ohba

2912-2915 :

Effect of Precipitations on Microstructures and Mechanical Properties of Nanostructured Al-Zn-Mg-Cu Alloy
Hanbin Chen and Bin Yang

2916-2918 :

Texture and Stretch Formability of Mg-1.5 mass%Zn-0.2 mass%Ce Alloy Rolled at Different Rolling Temperatures
Yasumasa Chino, Kensuke Sassa and Mamoru Mabuchi

2919-2921 :

Compressive Property and Energy Absorption of Porous Sintered Fiber Metals
J. C. Qiao, Z. P. Xi, H. P. Tang, J. Y. Wang and J. L. Zhu

2922-2922 :

Deoxidation of NiTi Alloy Melts Using Metallic Barium
Susumu Miyamoto, Masatoshi Watanabe, Takayuki Narushima and Yasutaka Iguchi

© 2008 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp