Materials Transactions Online

Materials Transactions, Vol.49 No.10 (2008)

2169-2169 :
PREFACE
Tatsuo Sato, Shinji Kumai and Yoshimasa Takayama
2170-2178 :
Biologically and Mechanically Biocompatible Titanium Alloys
Mitsuo Niinomi
2179-2184 :
Influence of Welding Parameters on Mechanical Properties of Friction Stir Welded 6061-T6 Launch Box
Hsing-Ta Hsieh and Jahau Lewis Chen
2185-2189 :
Mechanical Properties of Newly Developed Age Hardenable Mg-3.2 mol%Gd-0.5 mol%Zn Casting Alloy
Tomomichi Ozaki, Yasunori Kuroki, Kentaro Yamada, Hiroaki Hoshikawa, Sigeharu Kamado and Yo Kojima
2190-2195 :
Influence of Microstructures on the Notched Tensile Strength of Ti-4.5Al-3V-2Fe-2Mo Alloy
Wei-Chih Chung, Leu-Wen Tsay, Yi-Shiung Ding and Chun Chen
2196-2200 :
Microstructural Mechanisms during Dynamic Globularization of Ti-6Al-4V Alloy
Chan Hee Park, Kyung-Tae Park, Dong Hyuk Shin and Chong Soo Lee
2201-2201 :
PREFACE
Etsuo Akiba, Kiyoshi Aoki, Atsunori Kamegawa, Masahiko Morinaga and Shin-ichi Orimo
2202-2207 :
Alloy Design of Nb-Based Hydrogen Permeable Membrane with Strong Resistance to Hydrogen Embrittlement
Hiroshi Yukawa, Tomonori Nambu, Yoshihisa Matsumoto, Naoshi Watanabe, Guoxing Zhang and Masahiko Morinaga
2208-2213 :
Electron Microscopy Study of Eutectic Structure in Nb-Ti-X and Nb-Zr-X (X = Co, Ni) Hydrogen Permeation Alloys
Mitsuhiro Matsuda, Takuya Murasaki, Minoru Nishida, Kazuhiro Ishikawa and Kiyoshi Aoki
2214-2219 :
Effect of Ti/Ni Ratio and Annealing on Microstructure and Hydrogen Permeability of Nb-TiNi Alloy
Tetsuya Kato, Kazuhiro Ishikawa and Kiyoshi Aoki
2220-2223 :
Microstructure, Ductility and Hydrogen Permeability of Nb-Ti-Zr-Ni Alloys
Huixiang Tang, Kazuhiro Ishikawa and Kiyoshi Aoki
2224-2228 :
Synthesis and Hydrogen Storage Properties of a Single-Phase Magnesium Borohydride Mg(BH4)2
Hai-Wen Li, Kentaro Kikuchi, Toyoto Sato, Yuko Nakamori, Nobuko Ohba, Masakazu Aoki, Kazutoshi Miwa, Shin-ichi Towata and Shin-ichi Orimo
2229-2232 :
Effects of Y Substitution for La on the Microstructure and Electrochemical Properties of LaNi3.55Mn0.4Al0.3Co0.75 Hydrogen Storage Alloys
W. Li and Y. L. Du
2233-2237 :
Spontaneous Bending of Ni-Ti Alloy Plates Caused by Preferential Hydrogen Absorption
K. Horikawa, Y. Kawabata and H. Kobayashi
2238-2242 :
Effect of Continuous Hydrogen Charging on Tensile and Fatigue Properties of Amorphous Ni-Zr Alloy Membranes
K. Horikawa, K. Yamaue and H. Kobayashi
2243-2246 :
Fatigue Behavior of Cold-Worked 304 Stainless Steels under In-Situ Irradiation at 300°C
Yoshiharu Murase, Johsei Nagakawa and Norikazu Yamamoto
2247-2253 :
Liquid-Solid Equilibrium and Intermediate Phase Formation during Solidification in Mg-1.3 at%Zn-1.7 at%Y Alloy
Toshiaki Horiuchi, Akemi Ono, Kentaro Yoshioka, Takero Watanabe, Kenji Ohkubo, Seiji Miura, Tetsuo Mohri and Shigeyuki Tamura
2254-2258 :
The Variation of Absorption Edges of X-Rays for Liquid Hg-Rb Alloys
Toshio Itami and Akitoshi Mizuno
2259-2264 :
Precipitation of Solid Transmutation Elements in Irradiated Tungsten Alloys
Takashi Tanno, Akira Hasegawa, Mitsuhiro Fujiwara, Jian-Chao He, Shuhei Nogami, Manabu Satou, Toetsu Shishido and Katsunori Abe
2265-2274 :
Immobilization of Arsenic and Manganese in Contaminated Groundwater by Permeable Reactive Barriers Using Zero Valent Iron and Sheep Manure
Wahyu Wilopo, Keiko Sasaki, Tsuyoshi Hirajima and Toshiro Yamanaka
2275-2282 :
Identification of Sulfate- and Arsenate-Reducing Bacteria in Sheep Manure as Permeable Reactive Materials after Arsenic Immobilization in Groundwater
Wahyu Wilopo, Keiko Sasaki and Tsuyoshi Hirajima
2283-2287 :
Resistivity Evolution with Temperature of 7050 Aluminium Alloy in Different Casting Methods
Chunyan Ban, Fei Fan, Yang Wang, Qixian Ba and Jianzhong Cui
2288-2291 :
Optical and Electric Properties of Aligned-Growing Ta2O5 Nanorods
W. Miao, M. M. Zhu, Z. C. Li and Z. J. Zhang
2292-2297 :
A New Approach on the Modelling of Isothermal Recrystallisation in Cold Rolled Ferritic Steels: An Application to Back-Annealing of Low Carbon Sheet Steels
T. De Cock, C. Capdevila, F. G. Caballero and C. García de Andrés
2298-2302 :
The Recrystallization of Microelectronic Lead-Free Solders
Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Zhi-Feng Gu
2303-2309 :
Effects of Carbon and/or Alkaline Earth Elements on Grain Refinement and Tensile Strength of AZ31 Alloy
Jun Du, Jian Yang, Mamoru Kuwabara, Wenfang Li and Jihua Peng
2310-2314 :
Mechanical Properties of CaSiO3/Ti3SiC2 Composites and Hydroxyapatite Forming Ability in Simulated Body Fluid
Songjue Zhao, Lianjun Wang, Wan Jiang, Jianfeng Zhang and Lidong Chen
2315-2321 :
Effects of Vacancies on Deformation Behavior in Nanocrystalline Nickel
Motohiro Yuasa, Hiroshi Matsumoto, Masataka Hakamada and Mamoru Mabuchi
2322-2330 :
Effect of Alloying Elements on Variation of Micro-Hardness during Heat Treatment of Hypoeutectic High Chromium Cast Iron
Sudsakorn Inthidech and Yasuhiro Matsubara
2331-2334 :
Improvement in Adhesion of Sputtered TiB2 Nano-Compostite Coatings onto High Speed Steel by a Chromium Interlayer
Nurot Panich, Panyawat Wangyao, Patama Visuttipitukul, Prasonk Sricharoenchai and Yong Sun
2335-2340 :
Synthesis of TiB2-TiC-Ti3SiC2 Composites by Reactive Hot Pressing of B4C-SiC-Ti Powder Mixtures
Hitoshi Taimatsu, Shigeaki Sugiyama and Shuhou Koseki
2341-2346 :
Characterization of AE Signals Generated by Gas Leak on Pipe with Artificial Defect at Different Wall Thickness
Rem Nunez Laodeno, Hideo Nishino and Kenichi Yoshida
2347-2353 :
Microelectronic Wire Bonding with Insulated Au Wire: Effects of Process Parameters on Insulation Removal and Crescent Bonding
Jaesik Lee, Michael Mayer, Norman Zhou and John Persic
2354-2359 :
Magnetic-Domain Structure Analysis of Nd-Fe-B Sintered Magnets Using XMCD-PEEM Technique
Sukeyoshi Yamamoto, Mitsuharu Yonemura, Takanori Wakita, Keiki Fukumoto, Tetsuya Nakamura, Toyohiko Kinoshita, Yoshio Watanabe, Fang Zhun Guo, Masugu Sato, Tomoyuki Terai and Tomoyuki Kakeshita
2360-2364 :
Hardness and Composition of Solution-Treated Ag-Pd-Cu-Au Alloy Microstructures
Setsuo Saitoh, Kaori Sasaki, Takashi Nezu, Masayuki Taira and Yoshima Araki
2365-2370 :
Water-Pathway Sealing by Crystallization under Advective Supersaturated Solution Conditions
Mitsuo Manaka, Takato Takemura and Manabu Takahashi
2371-2376 :
Immersion Behavior of Automobile Shredded Residue in Surfactant Solutions and Detachment of Particulate Matter
Mayumi Ito, Maiko Akatsuka, Yutaka Kuwayama, Kunihiro Hori, Naoki Hiroyoshi and Masami Tsunekawa
2377-2382 :
Removal of Lead from Contaminated Soils with Chelating Agents
Masakazu Niinae, Koudai Nishigaki and Kenji Aoki
2383-2388 :
Metal Leaching from Spent Petroleum Catalyst by Acidophilic Bacteria in Presence of Pyrite
Dong J. Kim, D. Mishra, K. H. Park, J. G. Ahn and D. E. Ralph
2389-2393 :
Effect of pH and Temperature on Iron Oxidation by Mesophilic Mixed Iron Oxidizing Microflora
Dong-Jin Kim, Debabrata Pradhan, Kyung-Ho Park, Jong-Gwan Ahn and Seoung-Won Lee
2394-2398 :
Formation of In Situ Composite Layer on Magnesium Alloy Surface by Casting Process
Kazunori Asano and Hiroyuki Yoneda
2399-2404 :
Machinability of Short Potassium Titanate Fiber Reinforced AC4A Aluminum Alloy Composite
Kazunori Asano, Hiroyuki Yoneda and Yasuyuki Inui
2405-2413 :
The Effect of Microstructure Evolution on the Elevated Temperature Mechanical Properties in Mg-Sn-Ca System
Do Hyung Kim, Ju Youn Lee, Hyun Kyu Lim, Joon Seok Kyeong, Won Tae Kim and Do Hyang Kim
2414-2414 :
"Cold Rolling-Induced Multistage Transformation in Ni-Rich NiTi Shape Memory Alloys"
Chiang-Hao Li, Lung-Jen Chiang, Yung-Fu Hsu and Wen-Hsiung Wang

[JIM HOME] [JOURNAL ARCHIVES]

© 2008 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp