Materials Transactions Online

Materials Transactions, Vol.49 No.7 (2008)

1491-1495 :
Microstructures and Fusing Electrical Current of Microelectronic Sn-9Zn-(0.25RE) Solders
Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Kung-An Lan
1496-1502 :
Influence of Ga addition on Microstructure, Tensile Properties and Surface Oxide Film Characteristics of Microelectronic Sn-9Zn-xGa Solders
Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Ping-Hui Chen
1503-1507 :
Estimation of the Thermal Fatigue Resistance and Creep Properties of the Co/Ni-Bearing SAC305 Lead-Free Solders by the Strain Rate Change Tensile Test
Fangjie Cheng, Hiroshi Nishikawa and Tadashi Takemoto
1508-1512 :
Effect of Surface Contamination on Solid-State Bondability of Sn-Ag-Cu Bumps in Ambient Air
Ying-Hui Wang and Tadatomo Suga
1513-1517 :
Impact Properties of Lead-Free Sn-Ag-Cu-Ni-Ge Solder Joint with Cu Electrode
Ikuo Shohji, Hirohiko Watanabe, Takeshi Okashita and Tsutomu Osawa
1518-1523 :
Effect of Ni or Co Addition to Sn-Ag Solder on Microstructure and Joint Strength at Interface
Hiroshi Nishikawa, Akira Komatsu and Tadashi Takemoto
1524-1530 :
Effect of Hold Time on Low Cycle Fatigue Life of Micro Solder Joint
Yoshihiko Kanda, Yoshiharu Kariya and Yusuke Mochizuki
1531-1536 :
Characteristics of Zn-Al-Cu Alloys for High Temperature Solder Application
Seong-Jun Kim, Keun-Soo Kim, Sun-Sik Kim, Chung-Yun Kang and Katsuaki Suganuma
1537-1545 :
Interfacial Bonding Mechanism Using Silver Metallo-Organic Nanoparticles to Bulk Metals and Observation of Sintering Behavior
Yusuke Akada, Hiroaki Tatsumi, Takuto Yamaguchi, Akio Hirose, Toshiaki Morita and Eiichi Ide
1546-1549 :
Surface Sink Effects on Void Formation in GaSb and InSb under Ion Irradiation
Noriko Nitta, Yukari Ohoka, Koichi Sato, Qiu Xu, Yoshihiko Hayashi, Toshimasa Yoshiie and Masafumi Taniwaki
1550-1557 :
Interdiffusion in Pt-Containing γ-Ni and γ'-Ni3Al Alloys at 1150°C
Shigenari Hayashi, Daniel J. Sordelet, Larry R. Walker and Brian Gleeson
1558-1562 :
Effect of Ni Addition on the Glass Forming Ability and Mechanical Properties in Cu60Zr22Ti18 Metallic Glass Alloy
Dong-Myoung Lee, Seung-Yong Shin, Ju-Hyun Sun, Jin-Kyu Lee and Chi-Hwan Lee
1563-1571 :
Kinetic Analysis of the Gasification of Diamond
Yoshiaki Kashiwaya, Maki Iwasa and Kuniyoshi Ishii
1572-1578 :
Preparation of TiC-Ti3SiC2 Composites by Mechanical Alloying and Hot-Pressing
Hitoshi Hashimoto and Zheng Ming Sun
1579-1588 :
In Situ Observation of Diamond Gasification and the Crystallographic Relationship of Graphite Formed on the Surface of Diamond
Yoshiaki Kashiwaya, Maki Iwasa and Kuniyoshi Ishii
1589-1593 :
Grain Boundary Precipitation in Fe-30Mn-9Al-5Cr-0.7C Alloy
Yi Hsuan Tuan, Chih Lung Lin, Chuen Guang Chao and Tzeng Feng Liu
1594-1599 :
Effect of Milling on the Carbothermal Reduction of Oxide Mixture for (Ti,W)C-Ni
Hanjung Kwon and Shinhoo Kang
1600-1605 :
Plasma Electrolytic Oxidation of AZ91 Mg Alloy in the Sodium Stannate Electrolyte
Duck Y. Hwang, Jin Y. Cho, Dong H. Lee, Bong Y. Yoo and Dong H. Shin
1606-1615 :
Water Drop Erosion on Turbine Blades: Numerical Framework and Applications
Qulan Zhou, Na Li, Xi Chen, Akio Yonezu, Tongmo Xu, Shien Hui and Di Zhang
1616-1620 :
Reactive Infiltration of TiN Powder Preform with Molten Aluminum for the Fabrication of Nitride Ceramics Composite
Yoshihiro Kobayashi, Makoto Kobashi and Naoyuki Kanetake
1621-1628 :
Influence of Casting Defects on Tensile Properties of ADC12 Aluminum Alloy Die-Castings
A. K. M. Aziz Ahamed and Hiroshi Kato
1629-1637 :
Microstructure and Mechanical Properties of Resistance Spot Welded Advanced High Strength Steels
M. I. Khan, M. L. Kuntz, E. Biro and Y. Zhou
1638-1643 :
Surface Coating on Aluminum Flakes with Titanium Nitride Layer by Barrel-Sputtering Techniques
Satoshi Akamaru, Yuji Honda, Akira Taguchi and Takayuki Abe
1644-1649 :
Preparation of WC-SiC Whisker Composites by Hot Pressing and Their Mechanical Properties
Shigeaki Sugiyama, Daiki Kudo and Hitoshi Taimatsu
1650-1655 :
Effects of Pre-Strain and Heat Treatment Temperature on Phase Transformation Temperature and Shape Recovery Stress of Ti-Ni-Nb Shape Memory Alloys for Pipe Joint Applications
Kazunari Uchida, Naoto Shigenaka, Toshio Sakuma, Yuji Sutou and Kiyoshi Yamauchi
1656-1660 :
Effects of Cold Drawing and Annealing on Mechanical Properties and Microstructure of Co-Cr-Mo-Ni-Fe Alloys for Surgical Implants
Yoshimitsu Okazaki
1661-1666 :
Susceptibility to Hydrogen Absorption and Hydrogen Thermal Desorption of Titanium Alloys Immersed in Neutral Fluoride Solution under Applied Potential
Ken'ichi Yokoyama, Katsutoshi Takashima and Jun'ichi Sakai
1667-1674 :
Environmentally Assisted Cracking Behavior of Dissimilar Metal Weldments under High Temperature Water Conditions
J. Y. Huang, M. C. Young, S. L. Jeng, J. J. Yeh, J. S. Huang and R. C. Kuo
1675-1680 :
Design of Cascaded Oxide Thermoelectric Generator
Lihua Zhang, Tsuyoshi Tosho, Noriyuki Okinaka and Tomohiro Akiyama
1681-1687 :
Froth Separation of Ferrihydrite Slurry Using Microbubbles with Ultrasonic Irradiation
Etsuro Shibata, Shun Saito and Takashi Nakamura
1688-1693 :
High Temperature Properties of AZ91D Magnesium Alloy Composite Reinforced with Short Alumina Fiber and Mg2Si Particle
Kazunori Asano and Hiroyuki Yoneda
1694-1697 :
Effects of Annealing Temperature on the Properties of Strontium Copper Oxide Prepared by Radio Frequency Reactive Magnetron Sputtering Method
Jui-wen Liu, Shih-chin Lee and Chih-hao Yang
1698-1701 :
Effects of Friction Stir Welding Parameters on Microstructures and Mechanical Properties of Brass Joints
G. M. Xie, Z. Y. Ma and L. Geng
1702-1705 :
Recrystallization Behavior of Zr-xNb Alloys
Yoon-Soo Lim, Hyun-Gil Kim and Yong-Hwan Jeong
1706-1709 :
Hydrothermal Crystallization of TiO2 Gel Films on Ti Substrates and Formability of Hydroxyapatite
Masato Ueda, Ryoichi Matsunaga, Masahiko Ikeda and Michiharu Ogawa
1710-1712 :
Tensile Properties and Stretch Formability of Mg-1.5 mass%-0.2 mass%Ce Sheet Rolled at 723 K
Yasumasa Chino, Kensuke Sassa and Mamoru Mabuchi

[JIM HOME] [JOURNAL ARCHIVES]

© 2008 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp