Vol.49 No.03

Materials Transactions, Vol.49 No.3 (2008)

393-397 :: Direction Dependence of Compressive Properties of Mg Processed by Directional Solidification
Yasumasa Chino, Katsuya Kimura and Mamoru Mabuchi
398-401 :: Design of Nano-Sized Pt Metals Synthesized on Ti-Containing Mesoporous Silicas and Efficient Catalytic Application for NO Reduction
Kohsuke Mori, Sayoko Shironita, Toshiaki Shimizu, Takao Sakata, Hirotaro Mori, Tetsutaro Ohmichi and Hiromi Yamashita
402-410 :: Forecasting of the Consumption of Metals up to 2050
Kohmei Halada, Masanori Shimada and Kiyoshi Ijima
411-418 :: Decoupling Status of Metal Consumption from Economic Growth
Kohmei Halada, Masanori Shimada and Kiyoshi Ijima
419-423 :: The Relationship between Crystal Rotation Axis Orientation and Active Slip System in Pure Aluminum Tricrystal Deformed in Compression
Keizo Kashihara
424-427 :: Phase Constituents and Compressive Yield Stress of Ni-Co Base Alloys
C. Y. Cui, Y. F. Gu, D. H. Ping, T. Fukuda and H. Harada
428-434 :: Surface Topography Designed to Provide Osteoconductivity to Titanium after Thermal Oxidation
Atsushi Sugino, Keita Uetsuki, Kanji Tsuru, Satoshi Hayakawa, Akiyoshi Osaka and Chikara Ohtsuki
435-438 :: Synthesis of Chalcopyrite Nanoparticles via Thermal Decomposition of Metal-Thiolate
Takamitsu Kino, Toshihiro Kuzuya, Keiichi Itoh, Kenji Sumiyama, Takahide Wakamatsu and Minoru Ichidate
439-442 :: Relationship between Minimum Creep Rate and Rupture Life for a Die-Cast Mg-Al-Mn Alloy
Yoshihiro Terada and Tatsuo Sato
443-448 :: Effects of Phosphorus on Microstructure and Fluidity of Sn-0.7Cu-0.05Ni Lead-Free Solder
K. Nogita, C. M. Gourlay, J. Read, T. Nishimura, S. Suenaga and A. K. Dahle
449-452 :: Preparation and Hydrogen Permeation Properties of Thin Pd-Au Alloy Membranes Supported on Porous α-Alumina Tube
Junya Okazaki, David Alfredo Pacheco Tanaka, Margot Anabel Llosa Tanco, Yoshito Wakui, Takuji Ikeda, Fujio Mizukami and Toshishige M. Suzuki
453-456 :: Preparation of Oxygen Permeable Thin Films on YSZ Porous Substrates
Hiroo Takahashi, Hitoshi Takamura and Masuo Okada
457-460 :: High-Pressure Synthesis of MgNi Intermetallic Compound and Its Thermal Stability
Yasutaka Kamata, Riki Kataoka, Daisuke Kyoi, Atsunori Kamegawa and Masuo Okada
461-465 :: Crystallography and Morphology of Antiphase Boundary-Like Structure Induced by Martensitic Transformation in Ti-Pd Shape Memory Alloy
Mitsuhiro Matsuda, Toru Hara and Minoru Nishida
466-470 :: Characteristic Behavior of Nickel Ions during Transformation of Green Rust to Ferric Oxyhydroxides in Aqueous Solution
Katsuya Inoue, Kozo Shinoda, Shigeru Suzuki and Yoshio Waseda
471-478 :: Prediction of Precipitate Morphology by Atomic Matching Model and FEM Analysis with Consideration of Anisotropy Elastic Strain in a BCC/HCP system
Naoki Miyano, Akihiro Takahashi, Jun Miyazaki and Kei Ameyama
479-483 :: Interdiffusion of Refractory Elements in Fe-Cr-X (X-Mo, W) and Fe-Mo-W Ternary Iron Alloys
Koutarou Takeda, Kouji Yamashita, Yoshinori Murata, Toshiyuki Koyama and Masahiko Morinaga
484-488 :: Phase-Field Simulation on the Formation and Collapse Processes of the Rafted Structure in Ni-Based Superalloys
Yuhki Tsukada, Yoshinori Murata, Toshiyuki Koyama and Masahiko Morinaga
489-493 :: Softening by Coarsening of Ni-Al B₂ Phase Particles in Fe-Cr-Ni-Al-Zr Alloy
Junji Imai, Tadashi Hamada, Tokuteru Uesugi, Yorinobu Takigawa and Kenji Higashi
494-497 :: Glass Forming Ability and Mechanical Properties of New Ni-Based Bulk Metallic Glasses
Song Li, Guoqiang Xie, Dmitri V. Louzguine-Luzgin and Akihisa Inoue
498-501 :: Thermal Stability and Mechanical Properties of Ti_47.4Cu₄₂Zr_5.3TM_5.3(TM = Co, Fe) Metallic Glass Sheets Prepared by Twin-Roller Casting Method
Ichiro Seki, Hisamichi Kimura and Akihisa Inoue
502-505 :: Synthesis of Ti-Based Glassy Alloy/Hydroxyapatite Composite by Spark Plasma Sintering
Shengli Zhu, Xinmin Wang, Masahiro Yoshimura and Akihisa Inoue
506-512 :: Excellent Thermal Stability and Bulk Glass Forming Ability of Fe-B-Nb-Y Soft Magnetic Metallic Glass
Sangmin Lee, Hidemi Kato, Takeshi Kubota, Kunio Yubuta, Akihiro Makino and Akihisa Inoue
513-517 :: Influences of Temperature and Strain Rate on Mechanical Behavior of a Cu₄₅Zr₄₅Al₅Ag₅ Bulk Glassy Alloy
Takahiro Okuno, Asahi Kawashima, Hiroaki Kurishita, Wei Zhang, Hisamichi Kimura and Akihisa Inoue
518-521 :: Nanostructural Evolution of Cr-rich Precipitates in a Cu-Cr-Zr Alloy During Heat Treatment Studied by 3 Dimensional Atom Probe
Masahiko Hatakeyama, Takeshi Toyama, Yasuyoshi Nagai, Masayuki Hasegawa, Morten Eldrup and Bachu N. Singh
522-526 :: Face-Centered Cubic Ti Cluster Assemblies Prepared by Plasma-Gas-Condensation
Naokage Tanaka, Dong-Liang Peng, Kenji Sumiyama and Takehiko Hihara
[Erratum]
527-531 :: Thermal and Magnetic Properties of Mechanically Alloyed fcc Cu-Fe Supersaturated Solid Solutions
Jean-Claude Crivello, Tohru Nobuki and Toshiro Kuji
532-537 :: Viscoplastic Parameter Identification for Lead-Free Solder Alloy by Micro-Indentation, FE Simulation and Optimization
Hiroshi Hamasaki, Kazuhiro Shinbata and Fusahito Yoshida
538-547 :: The Effect of Solute Elements on Hardness and Grain Size in Platinum Based Binary Alloys
Taichi Murakami, Ryoji Sahara, Daisuke Harako, Masahiro Akiba, Takayuki Narushima and Chiaki Ouchi
548-553 :: Damage Evaluation Using Magnetic Properties in Stainless Steels under Biaxial Stress
Akira Shimamoto, Hiroshi Ohkawara, Sung-mo Yang, Dae-kue Choi and Satoshi Akamatsu
554-558 :: Tensile Properties of Forged Mg-Al-Zn-Ca Alloy
Masataka Hakamada, Akira Watazu, Naobumi Saito and Hajime Iwasaki
559-564 :: Crystallographic and Fractographic Analysis of Upper Bainite
Meng-Yin Tu, Wen-Hsiung Wang and Yung-Fu Hsu
565-571 :: Incorporation of Short Chain Alkylamine in Template Micelle during MCM-41 Formation Process
Hyoung-Ho Lee, Junji Shibata, Ji-Whan Ahn and Hwan Kim
572-578 :: Phase Equilibrium and Activities of Fe-S-O Melts
Shigeru Ueda, Katsunori Yamaguchi and Yoichi Takeda
579-586 :: Effect of Nitrogen on Crevice Corrosion and Repassivation Behavior of Austenitic Stainless Steel
Haruo Baba and Yasuyuki Katada
587-592 :: Effect of Si Content on Turning Machinability of Al-Si Binary Alloy Castings
Masatsugu Kamiya, Takao Yakou, Tomohiro Sasaki and Yoshiki Nagatsuma
593-599 :: Effects of Metal Doping on Thermoelectric Properties of Arc-Melted and Hot-Pressed β-Rhombohedral Boron
H. K. Kim, T. Nakayama, J. Shimizu and K. Kimura
600-604 :: Thermoelectric Properties of Sr-Ru-O Compounds Prepared by Spark Plasma Sintering
Nittaya Keawprak, Rong Tu and Takashi Goto
605-611 :: Sorption of Co²⁺ Ions on the Biogenic Mn Oxide Produced by a Mn-Oxidizing Fungus, Paraconiothyrium sp. WL-2
Keiko Sasaki, Minoru Matsuda, Tomohiro Urata, Tsuyoshi Hirajima and Hidetaka Konno
612-618 :: Synthesis of Zeolite X from Waste Sandstone Cake Using Alkali Fusion Method
Takaaki Wajima, Kazuharu Yoshizuka, Takashi Hirai and Yasuyuki Ikegami
619-623 :: Effect of Shot Peening Treatment on Forging Die Life
Shih-Hsien Chang, Shih-Chin Lee and Tzu-Piao Tang
624-628 :: Effects of Particle Size on Mechanical Properties of a TiC Containing Tool Steel by Hot Isostatic Press
Jhewn-Kuang Chen, Tzu-Piao Tang, Sen-Fu Chan and Shih-Hsien Chang
629-636 :: Continuous Monitoring of Oxygen Chemical Potential at the Surface of Growing Oxide Scales during High Temperature Oxidation of Metals
Kojiro Akiba, Mitsutoshi Ueda, Kenichi Kawamura and Toshio Maruyama
637-642 :: Aging Behaviors in AZ91D/Al₁₈B₄O_33w Composite Fabricated by Squeeze Casting
W. G. Wang, K. C. Chang, K. Matsugi and G. Sasaki
643-649 :: Crack Surface Energy: Temperature and Force Dependence
K. Kitamura
650-654 :: Effects of Alloying Element Balance and Micro-Alloying Elements on Magnetic Properties and Hot Ductility of PC Permalloy
Tadashi Inoue, Katsuhisa Yamauchi and Fumio Fujita
655-660 :: Electromagnetic Interference Shielding Characteristics of Sn-Al Powder Coating Layers
Fei-Shuo Hung, Fei-Yi Hung, Che-Ming Chiang and Truan-Sheng Lui
661-670 :: Effect of Volume Fraction on the Flow Behavior of Al-SiC Composites Considering the Spatial Distribution of Delaminated Particles
Di Zhang, Kenjiro Sugio, Kazuyuki Sakai, Hiroshi Fukushima and Osamu Yanagisawa
671-680 :: Prediction of Flow Behavior in the Heterogeneously Dispersed Al-10 vol%SiC Composites
Di Zhang, Kenjiro Sugio, Kazuyuki Sakai, Hiroshi Fukushima and Osamu Yanagisawa
681-684 :: Fatigue Behaviors and Microstructures in an Extruded Mg-Al-Zn Alloy
Hidetoshi Somekawa, Norio Maruyama, Sachiko Hiromoto, Akiko Yamamoto and Toshiji Mukai
685-687 :: Production and Properties of a Spray Formed 70%Si-Al Alloy for Electronic Packaging Applications
Kun Yu, Chao Li, Richu Wang and Jun Yang
688-690 :: Preferred Orientation of Inconel 690 after Vibration Arc Oscillation Welding
Che-wei Kuo, Sheng-Min Yang, Jie-Hao Chen, Gen-Huey Lai, Yu-Che Chen, Yung-Tse Chang and Weite Wu
692-692 :: Erratum : Face-Centered Cubic Ti Cluster Assemblies Prepared by Plasma-Gas-Condensation
Naokage Tanaka, Dong-Liang Peng, Kenji Sumiyama and Takehiko Hihara

[JIM HOME] [JOURNAL ARCHIVES]