Vol.48 No.09

Materials Transactions, Vol.48 No.9 (2007)

2259-2262 :: Phase Equilibria in Ni-Rich Portion of Ni-Si System
Katsunari Oikawa, Ryo Saito, Kosei Kobayashi, Jun Yaokawa and Koichi Anzai
2263-2271 :: Thermodynamic Analysis of the Phase Equilibria in the Nb-Ni-Zr System
Tatsuya Tokunaga, Satoshi Matsumoto, Hiroshi Ohtani and Mitsuhiro Hasebe
2272-2279 :: Cellular and Dendritic Growth in Constrained Solidification
Yasunori Miyata
2280-2284 :: Phase-Field Simulation of Free Dendrite Growth of Aluminum-4.5 mass% Copper Alloy
Kanae Oguchi and Toshio Suzuki
2285-2288 :: Faceted Crystal Growth of Silicon from Undercooled Melt of Si-20 mass%Ni Alloy
Tsukasa Takazawa, Minoru Ikeda and Toshio Suzuki
2289-2296 :: Extra Nodes Added on the Solid/Liquid Interface to Solve the Mass Transfer Problem in a Directional Solidification Process
Yau-Chia Liu and Long-Sun Chao
2297-2303 :: Theoretical Considerations for Thermal Control over Solid Fraction of Aluminum Alloy Slurry Prepared by Cup-Cast Method
F. Pahlevani, J. Yaokawa, K. Anzai and E. Niyama
2304-2311 :: Prediction of Thermal Properties In A Solidification Process
Yu-Ru Chen, Long-Sun Chao and Li-Sheng Lin
2312-2315 :: Effects of Shaping Conditions on the Microstructure and the Mechanical Property of the Al₂O₃-YAG Eutectic Composite Produced by Melting the Al₂O₃-YAP Eutectic Structure
Tomoya Nagira, Hideyuki Yasuda, Takumi Sakimura and Asako Kawaguchi
2316-2318 :: Inconel 690 Alloy Crystal Growth Orientation under Different Vibration Waveforms
Che Wei Kuo, Ming Che Chen, Jie Hao Chen, Gen-Huey Lai, Yung-Tse Chang, Yu-Che Chen and Weite Wu
2319-2323 :: Characterization and Mechanism of 304 Stainless Steel Vibration Welding
Che-Wei Kuo, Chi-Ming Lin, Gen-Huey Lai, Yu-Che Chen, Yung-Tse Chang and Weite Wu
2324-2328 :: Microstructure and Wear Characteristics of Hypoeutectic, Eutectic and Hypereutectic (Cr,Fe)₂₃C₆ Carbides in Hardfacing Alloys
Che Wei Kuo, Chieh Fan, Sheng Hao Wu and Weite Wu
2329-2335 :: Creep Parameters in a Die-Cast Mg-Al-Ca Alloy
Yoshihiro Terada, Naoya Ishimatsu and Tatsuo Sato
2336-2339 :: Comparison of Mechanical Properties of Thin Copper Films Processed by Electrodeposition and Rolling
Masataka Hakamada, Yoshiaki Nakamoto, Hiroshi Matsumoto, Hajime Iwasaki, Youqing Chen, Hiromu Kusuda and Mamoru Mabuchi
2340-2342 :: Fabrication and Characterization of GaP Photonic Crystals for Terahertz Wave Application
Kyosuke Saito, Kei Nozawa, Tadao Tanabe, Yutaka Oyama, Ken Suto, Jun-ichi Nishizawa, Tetsuo Sasaki, Tomoyuki Kimura
2343-2348 :: Deformation and Anelastic Recovery of Pure Magnesium and AZ31B Alloy Investigated by AE
Yunping Li and Manabu Enoki
2349-2352 :: Computation of Interfacial Thermal Resistance by Phonon Diffuse Mismatch Model
Haitao Wang, Yibin Xu, Masato Shimono, Yoshihisa Tanaka and Masayoshi Yamazaki
2353-2357 :: Evaluation of the Potential Amounts of Dissipated Rare Metals from WEEE in Japan
Eiji Yamasue, Kenichi Nakajima, Ichiro Daigo, Seiji Hashimoto, Hideyuki Okumura and Keiichi N. Ishihara
2358-2361 :: Local Structure around Pd Atoms in Pd_42.5Ni_7.5Cu₃₀P₂₀ Excellent Glass-Former Studied by Anomalous X-ray Scattering
Shinya Hosokawa, Jean-François Bérar, Nathalie Boudet, Tetsu Ichitsubo, Eiichiro Matsubara and Nobuyuki Nishiyama
2362-2364 :: Validity of Activation Energy for Vacancy Migration Obtained by Integrating Force–Distance Curve
Michio Matsushita, Koichi Sato, Toshimasa Yoshiie and Qiu Xu
2365-2369 :: Substance Flow Analysis of Indium for Flat Panel Displays in Japan
Kenichi Nakajima, Kazuyo Yokoyama, Kazuko Nakano and Tetsuya Nagasaka
2370-2373 :: Structural Analysis of Polycrystalline BiFeO₃ Films by Transmission Electron Microscopy
Hiroshi Naganuma, Andras Kovacs, Akihiko Hirata, Yoshihiko Hirotsu and Soichiro Okamura
2374-2377 :: Synthesis of Fine Ceramic Particles in Molten Aluminum by Combustion Reaction
Wataru Yoshida, Makoto Kobashi and Naoyuki Kanetake
2378-2380 :: Improvement of Soft Magnetic Properties in (Fe_0.85B_0.15)_100-xCu_x Melt-Spun Alloys
Motoki Ohta and Yoshihito Yoshizawa
2381-2384 :: Preparation of Open-Cell Porous Zr-Based Bulk Glassy Alloy
Takeshi Wada, Fengxiang Qin, Xinmin Wang, Akihisa Inoue and Masahiro Yoshimura
2385-2389 :: Formation and Thermal Stability of Ni-Based Bulk Metallic Glasses in Ni-Zr-Nb-Al System
J. B. Qiang, W. Zhang and A. Inoue
2390-2394 :: Effects of Ta on Microstructure and Mechanical Property of Ti-Zr-Cu-Pd-Ta Alloys
F. X. Qin, X. M. Wang and A. Inoue
2395-2398 :: Hydrogen Storage Properties and Corresponding Phase Transformations of Mg/Pd Laminate Composites Prepared by a Repetitive-Rolling Method
Nobuhiko Takeichi, Koji Tanaka, Hideaki Tanaka, Tamotsu T. Ueda, Makoto Tsukahara, Hiroshi Miyamura and Shiomi Kikuchi
2399-2402 :: Effects of Transmutation Elements on Neutron Irradiation Hardening of Tungsten
Takashi Tanno, Akira Hasegawa, Jian-Chao He, Mitsuhiro Fujiwara, Shuhei Nogami, Manabu Satou, Toetsu Shishido and Katsunori Abe
2403-2408 :: Mechanical Properties of Co-Based L1₂ Intermetallic Compound Co₃(Al,W)
Seiji Miura, Kenji Ohkubo and Tetsuo Mohri
2409-2413 :: Effects of Size and Volume Fraction of Precipitated Crystalline Phase Induced by Friction Stir Processing on Hardness in Zr–Al–Ni–Cu Bulk Metallic Glass
Junpei Kobata, Yorinobu Takigawa, Sung Wook Chung, Hiroshi Tsuda, Hisamichi Kimura and Kenji Higashi
2414-2418 :: Magnetic Phase Transition of MnBi under High Magnetic Fields and High Temperature
Keiichi Koyama, Tetsuya Onogi, Yoshifuru Mitsui, Yuko Nakamori, Shin-ichi Orimo and Kazuo Watanabe
2419-2421 :: Molecular Dynamics Simulation of Thermal Conductivity of Silicon Thin Film
Haitao Wang, Yibin Xu, Masato Shimono, Yoshihisa Tanaka and Masayoshi Yamazaki
2422-2426 :: Effect of Hf Addition on Oxidation Properties of Pt-Ir Modified Aluminide Coating
Akihiro Yamaguchi, Hideyuki Murakami, Seiji Kuroda, Hachiro Imai
2427-2431 :: Strengthening of Titanium Silicon Carbide by Grain Orientation Control and Silicon Carbide Whisker Dispersion
Hitoshi Hashimoto, Zheng Ming Sun, Syuji Tada and Yong Zou
2432-2435 :: Mechanical Behavior of Ti₃AlC₂ Prepared by Pulse Discharge Sintering Method
Yong Zou, ZhengMing Sun, Hitoshi Hashimoto and Shuji Tada
2436-2444 :: Outflow of Resources from Japan focusing on End-of-life Vehicles
Masaaki Fuse, Kenichi Nakajima and Hiroshi Yagita
2445-2448 :: New TiZrCuPd Quaternary Bulk Glassy Alloys with Potential of Biomedical Applications
S. L. Zhu, X. M. Wang, F. X. Qin, M. Yoshimura and A. Inoue
2449-2453 :: Surface Free Energy Effects in Sputter-Deposited WN_x Films
Chun-Wei Fan and Shih-Chin Lee
2454-2458 :: Changes in Hydrogen Permeability and Microstructures of Nb-(Ti, Zr)Ni Alloys by Cold Rolling and Annealing
Huxiang Tang, Kazuhiro Ishikawa and Kiyoshi Aoki
2459-2463 :: Annealing-Induced Devitrification Behavior of a Ti_47.4Zr_5.3Ni_5.3Cu_42.0 Glassy Alloy
Ichiro Seki, Mikio Fukuhara, Asahi Kawashima, Hisamichi Kimura and Akihisa Inoue
2464-2466 :: Preparation of TiO₂ Nanotubes and Their Photocatalytic Properties in Degradation Methylcyclohexane
Wen Liu, Jianqin Gao, Fengbao Zhang and Guoliang Zhang
2467-2475 :: Morphology of Intermetallic Compounds in Al-Si-Fe Alloy and Its Control by Ultrasonic Vibration
Yoshiaki Osawa, Susumu Takamori, Takashi Kimura, Kazumi Minagawa and Hideki Kakisawa
2476-2482 :: A Scheme to Design Multi-Component Bulk Metallic Glasses in Ideal Glass-Forming Liquids
Z. P. Lu and C. T. Liu
2483-2488 :: Effect of Die Surface Roughness on Deformation Characteristics and Cavitation during Blow Forming in a Superplastic 5083 Alloy
Horng-yu Wu, Chui-hung Chiu, Shyh-hung Sheu, Shyong Lee and Jian-yih Wang
2489-2493 :: Three Dimensional Analysis of Thermal Stress and Prediction of Failure of Polytypoidally Joined SI₃N₄-AL₂O₃ Functionally Graded Material (FGM)
Caroline S. Lee, Sung-Geun Kim, Sung-Hoon Ahn, Lutgard C. DeJonghe and Gareth Thomas
2494-2500 :: Study of Solid Accretion Formation inside Pyrometallurgical Vessels by a Wax Model and Similarity Conversion for Gas Bottom-Blown Process
Yu-Pin Huang, Chiung-Chieh Kuo, Weng-Sing Hwang, Jia-Shyan Shiau and Shih-Hsien Liu
2501-2505 :: Dissimilar Friction Stir Welded Joints between 2024-T3 Aluminum Alloy and AZ31 Magnesium Alloy
Saad Ahmed Khodir and Toshiya Shibayanagi
2506-2512 :: Fabrication and Thermal Properties of Carbon Nanotube/Nickel Composite by Spark Plasma Sintering Method
Shunsuke Yamanaka, Ryohei Gonda, Akira Kawasaki, Hiroki Sakamoto, Yutaka Mekuchi, Masaki Kuno and Takayuki Tsukada
2513-2517 :: Numerical Analysis for Electromigration of Cu Atom
Takenao Nemoto, Tutomu Murakawa and A. Toshimitsu Yokobori, Jr.
2518-2524 :: Dynamic Substance Flow Analysis of Aluminum and Its Alloying Elements
Hiroki Hatayama, Hiroyuki Yamada, Ichiro Daigo, Yasunari Matsuno and Yoshihiro Adachi
2525-2533 :: Effects of Strain Rate and Temperature on the Deformation and Fracture Behaviour of Titanium Alloy
Su-Tang Chiou, Hsien-Lung Tsai and Woei-Shyan Lee
2534-2538 :: Correlation between sp²/sp³ Ratio or Hydrogen Content and Water Contact Angle in Hydrogenated DLC Film
Shih-Chin Lee, Fong-Cheng Tai and Che-Hung Wei
2539-2541 :: Enhanced Grain Refinement by Mechanical Twinning in a Bulk Cu-30 mass%Zn during Multi-Directional Forging
H. Miura, Y. Nakao and Taku Sakai
2542-2544 :: Unusual Plasticity of the Particulate-Reinforced Cu-Zr-Based Bulk Metallic Glass Composites
Qingsheng Zhang, Wei Zhang, Guoqiang Xie and Akihisa Inoue

[JIM HOME] [JOURNAL ARCHIVES]