Materials Transactions, Vol.48 No.6 (2007)

1161-1161 :

PREFACE
Sohichi Hirose, Hirotsugu Inoue, Hironobu Yuki

1162-1165 :

Controlling Alternating Current Distribution inside Conductive Material Leads to a Novel Volumetric Examination Method —Experimental Verification
Noritaka Yusa, Ladislav Janousek and Kenzo Miya

1166-1172 :

Measurement of Potential Drop Distribution by Scanning the Closely Coupled Probes Sensor for Sensitive NDE of Shallow Surface Cracks
Hironori Tohmyoh, Takuma Suzuki, S. Reaz Ahmed and Masumi Saka

1173-1178 :

Three-Dimensional Fabric Analysis for Anisotropic Material Using Multi-Directional Scanning Line —Application to X-ray CT Image—
Takato Takemura, Manabu Takahashi, Masanobu Oda, Hidekazu Hirai, Atsushi Murakoshi and Makoto Miura

1179-1183 :

Long Range Inspection of Wall Reduction of Tank Utilizing Zero-th Order Symmetric Mode Lamb Wave —Performance Demonstration of the Method Proposed—
Hideo Cho, Takuma Matsuo and Mikio Takemoto

1184-1189 :

Corrosion Process in Reinforced Concrete Identified by Acoustic Emission
Masayasu Ohtsu and Yuichi Tomoda

1190-1195 :

Detection of Fatigue Cracks at Weld Toes by Crack Detection Paint and Surface SH Wave
Ichihiko Takahashi and Michio Ushijima

1196-1201 :

Multiple Scattering Simulation of Ultrasonic Shear Wave in Unidirectional Carbon/Epoxy Composites
Shiro Biwa, Takushi Kamiya and Nobutada Ohno

1202-1207 :

Backscattered Transverse Wave Imaging of Cracked-Faces with Linear and Nonlinear Ultrasonics
Koichiro Kawashima, Morimasa Murase, Keiji Shibata and Toshihiro Ito

1208-1214 :

Michelson-Type Optical Fiber Laser Interferometer for Cylinder Wave Monitoring
Takuma Matsuo, Naoaki Yokoi, Hideo Cho and Mikio Takemoto

1215-1220 :

Evaluation of the Twinning Behavior of Polycrystalline Magnesium at Room Temperature by Acoustic Emission
Yunping Li and Manabu Enoki

1221-1226 :

Acquisition and Analysis of Continuous Acoustic Emission Waveform for Classification of Damage Sources in Ceramic Fiber Mat
Kaita Ito and Manabu Enoki

1227-1235 :

Ultrasonic Testing Method for Detection of Planar Flaws in Graphite Material
Eiichi Sato, Mitsuharu Shiwa, Yoshio Shinagawa, Takashi Ida, Satoshi Yamazoe and Akiyoushi Sato

1236-1243 :

Reflection of Obliquely Incident Guided Waves by an Edge of a Plate
Arief Gunawan and Sohichi Hirose

1244-1248 :

Smart Stress-Memory Patch for Fatigue Damage of Structure
Shoichi Nambu and Manabu Enoki

1249-1253 :

Enhancement of Impact Mass Estimation Algorithm for a Plate Type Structure
Doo-Byung Yoon, Jin-Ho Park, Young-Chul Choi, Hyu-Sang Kwon and Joon-Hyun Lee

1254-1259 :

Evaluation of Rolling Fatigue Damage in Deep Groove Ball Bearings by Divided-Type Focusing Ultrasonic Transducer
Yorinobu Murata, Hiroki Toda, Chiaki Tawa, Masahiro Kiji and Noriyasu Oguma

1260-1260 :

PREFACE
Junji Saida, Akihisa Inoue

1261-1265 :

Alternative Strain Aging Effect for Fatigue of Ductile Bulk Glassy Alloys
Yoshihiko Yokoyama, Markus Wilde, Katsuyuki Fukutani and Akihisa Inoue

1266-1271 :

Origin of the Effect of the Gas Atmosphere during Mold-Casting Zr₆₅Al_7.5Ni₁₀Pd_17.5 Bulk Glassy or Nano-Quasicrystal-Forming Alloy
Albertus Deny Setyawan, Hidemi Kato, Junji Saida and Akihisa Inoue

1272-1275 :

Transition from Plasticity to Brittleness in Cu-Zr-Based Bulk Metallic Glasses
Qingsheng Zhang, Wei Zhang and Akihisa Inoue

1276-1281 :

Drastic Increase in the Toughness of Structural Relaxed Hypoeutectic Zr₅₉Cu₃₁Al₁₀ Bulk Glassy Alloy
Yoshihiko Yokoyama, Tohru Yamasaki, Masahiko Nishijima and Akihisa Inoue

1282-1287 :

Compositional Dependence of Thermal and Mechanical Properties of Quaternary Zr-Cu-Ni-Al Bulk Glassy Alloys
Yoshihiko Yokoyama and Akihisa Inoue

1288-1291 :

Effect of Nanocrystal Distribution on Mechanical Properties of Ti-Based Metallic Glasses
Hirofumi Ito, Tokujiro Yamamoto, Masashi Hasegawa and Akihisa Inoue

1292-1298 :

Electronic Structure and Stability of the Pd-Ni-P Bulk Metallic Glass
Tsunehiro Takeuchi, Daisuke Fukamaki, Hidetoshi Miyazaki, Kazuo Soda, Masashi Hasegawa, Hirokazu Sato, Uichiro Mizutani, Takahiro Ito and Shinichi Kimura

1299-1303 :

Local Atomic Structure Analysis of Zr-Ni and Zr-Cu Metallic Glasses Using Electron Diffraction
Akihiko Hirata, Takuro Morino, Yoshihiko Hirotsu, Keiji Itoh and Toshiharu Fukunaga

1304-1312 :

Analysis of Bulk Metallic Glass Formation Using a Tetrahedron Composition Diagram that Consists of Constituent Classes Based on Blocks of Elements in the Periodic Table
Akira Takeuchi, Budaraju Srinivasa Murty, Masashi Hasegawa, Srinivasa Ranganathan and Akihisa Inoue

1313-1321 :

Development of Interatomic Potential for Zr-Ni Amorphous Systems
T. Kumagai, D. Nikkuni, S. Hara, S. Izumi and S. Sakai

1322-1326 :

Glass Forming Ability and Mechanical Properties of Quinary Zr-Based Bulk Metallic Glasses
K. Mondal, T. Ohkubo, T. Mukai and K. Hono

1327-1335 :

Deformation-Induced Nanoscale Dynamic Transformation Studies in Zr-Al-Ni-Pd and Zr-Al-Ni-Cu Bulk Metallic Glasses
Junji Saida, Hidemi Kato, Albertus Deny Heri Setyawan, Kyosuke Yoshimi and Akihisa Inoue

1336-1339 :

Molecular Dynamics Study of Glass-Forming Ability of Zr-Based Metallic Glasses
Kazuki Sugita, Masataka Mizuno, Hideki Araki and Yasuharu Shirai

1340-1349 :

Phase Stability of an Amorphous Phase Against Electron Irradiation Induced Crystallization in Fe-Based Metallic Glasses
Takeshi Nagase, Akihiro Nino and Yukichi Umakoshi

1350-1354 :

Influence of Silicon Additions on the Microstructure and Mechanical Properties of Cu₄₇Ti₃₄Zr₁₁Ni₈ Bulk Metallic Glass Forming Alloys
Y. F. Sun, C. H. Shek and S. K. Guan

1355-1358 :

Formation of a Ni-Based Glassy Alloy in Centimeter Scale
Zeng Yuqiao, Nobuyuki Nishiyama and Akihisa Inoue

1359-1362 :

Dynamic Mechanical Properties in a Zr₅₀Cu₄₀Al₁₀ Bulk Metallic Glass
J. M. Pelletier, Y. Yokoyama and A. Inoue

1363-1372 :

Glassy Solidification Criterion of Zr₅₀Cu₄₀Al₁₀ Alloy
Yoshihiko Yokoyama, Hasse Fredriksson, Hideyuki Yasuda, Masahiko Nishijima and Akihisa Inoue

1373-1379 :

Three Stages of Bonding Mode before Nucleation of Metal Crystals
Hiroshi Fujita

1380-1386 :

Ellipsometric Characterization on Multi-Layered Thin Film Systems during Hydrogenation
D. J. Santjojo, Tatsuhiko Aizawa and S. Muraishi

1387-1395 :

Grain Growth Behaviors in a Friction-Stir-Welded ZK60 Magnesium Alloy
S. Mironov, Y. Motohashi and R. Kaibyshev

1396-1405 :

Growth Manner of Intermetallic Compounds at the Weld Interface of Steel/Aluminum Alloy Lap Joint Fabricated by a Defocused Laser Beam
Kwang-Jin Lee, Shinji Kumai, Naonori Kawamura, Nobuhiro Ishikawa and Kazuo Furuya

1406-1411 :

Superplasticity of Fine-Grained Magnesium Alloy AZ31 Processed by Multi-Directional Forging
Jie Xing, Xuyue Yang, Hiromi Miura and Taku Sakai

1412-1416 :

Effects of Grain-Boundary Sliding and Plastic Deformation of Grains on the Formation of Grain-Boundary Cracks in a Double Cylindrical Bicrystal of a Cu-SiO₂ Alloy
Masakazu Seki, Mitsuru Fujimoto, Toshiyuki Fujii, Masaharu Kato and Susumu Onaka

1417-1421 :

Effect of Preservative Solution on Fracture Characteristics of Bovine Femoral Cortical Bone
Hisao Kikugawa, Takashi Asaka and Masahito Miyake

1422-1426 :

Synergetic Effect of Grain Refinement and Spherical Shaped Precipitate Dispersions in Fracture Toughness of a Mg-Zn-Zr Alloy
Hidetoshi Somekawa, Alok Singh and Toshiji Mukai

1427-1430 :

Effect of Helium and Hydrogen Production on Irradiation Hardening of F82H Steel Irradiated by Ion Beams
Eiichi Wakai, Masami Ando, Tomotsugu Sawai and Somei Ohnuki

1431-1437 :

Stress Corrosion Cracking Growth Rates of Candidate Canister Materials for Spent Nuclear Fuel Storage in Chloride-Containing Atmosphere
Jun-ichi Tani, Masami Mayuzumi, Taku Arai and Nobuyoshi Hara

1438-1443 :

Corrosion Behavior of Silicon-Bearing Steel in a Wet/Dry Environment Containing Chloride Ions
Toshiyasu Nishimura

1444-1450 :

Pores and Microbubbles in Al and Al-XSi Alloys
Teng-Shih Shih, Chi-Yu Shie and Pai-Sheng Wei

1451-1457 :

Corrosion Behavior of Pure Iron by Different Droplet Volume of Sulfuric Acid Solution
Rongguang Wang and Mitsuo Kido

1458-1462 :

Activity Coefficient of AgO_0.5 in the PbO-SiO₂ Melt at 1273 K
Shigeru Ueda, Tomomasa Kumagai and Katsunori Yamaguchi

1463-1468 :

Numerical Simulation on Impact Velocity of Ceramic Particles Propelled by Supersonic Nitrogen Gas Flow in Vacuum Chamber
Hiroshi Katanoda, Minoru Fukuhara and Naoko Iino

1469-1475 :

In Situ Formation and Refinement of Mg₂Si in Fiber-Reinforced AZ91D Magnesium Alloy
Kazunori Asano and Hiroyuki Yoneda

1476-1482 :

Interfacial Reaction between Ti-Al Binary Alloys and High Carbon Steel
Yasuhiro Morizono, Takateru Yamamuro and Minoru Nishida

1483-1491 :

Novel Electroforming Process for Bulk Nanocrystalline Ni-W Alloys with Minimizing W-Concentration Gradient and Fluctuation
Yoshihisa Kimoto, Shin Wakayama, Akari Fujii, Yorinobu Takigawa and Kenji Higashi
[Erratum]

1492-1500 :

Heat Transfer Model for Thin Solidified Material in Continuous Casting
Nobuaki Ito

1501-1504 :

Estimation of Glass Forming Ability of Amorphous Alloys Based on the Thermal Analysis Data during Cooling
Sang-Bok Lee, Sang-Kwan Lee and Nack J. Kim

1505-1510 :

Hydroxyapatite Formation on CaTiO₃ Film Prepared by Metal-Organic Chemical Vapor Deposition
Mitsutaka Sato, Rong Tu, Takashi Goto, Kyosuke Ueda and Takayuki Narushima

1511-1516 :

Effect of Dissolved Oxygen Content on Pin-on-Disc Wear Behavior of Biomedical Co-Cr-Mo Alloys in a Like-on-Like Configuration in Distilled Water
Kazushige Kumagai, Naoyuki Nomura and Akihiko Chiba

1517-1522 :

Microstructure and Mechanical Properties of Co-29Cr-6Mo Alloy Aged at 1023 K
Shingo Kurosu, Naoyuki Nomura and Akihiko Chiba

1523-1528 :

Effect of Surface Microstructure of Titanium Sheet on the Photocatalytic Activity of Its Oxide Film
Meiqin Shi, Yoshimasa Takayama and Hajime Kato

1529-1533 :

Preparations of CaRuO₃ Body by Plasma Sintering and Its Thermoelectric Properties
Nittaya Keawprak, Rong Tu and Takashi Goto

1534-1537 :

Life Cycle Assessment of Manufacturing System of Lead-Free Bronze Products
Atsushi Nakano, Kouko Takesako, Kosaku Yamada and Hidekazu Sueyoshi

1538-1547 :

Precipitated Phases and Corrosion Behavior in the Dissimilar Alloy 690-SUS 304L Joints Formed by EBW and GTAW
Hwa-Teng Lee, Yong-Ding Lin, Tsung-Yuan Kuo and Sheng-Long Jeng

1548-1553 :

Determination of Dispersive Properties of Silicas by Inverse Gas Chromatography: Variation with Surface Treatment
Young-Cheol Yang and Pyoung-Ran Yoon

1554-1557 :

ATR-FTIR and Nanoindentation Measurements of PMDA-ODA Polyimide Film under Different Curing Temperature
Shih-Chin Lee, Fong-Cheng Tai, Che-Hung Wei and Jui-I Yu

1558-1565 :

Deposition of Nanocrystalline Zinc-Nickel Alloys by D.C. Plating in Additive Free Chloride Bath
Rashid Rizwan, Mazhar Mehmood, Muhammad Imran, Jamil Ahmad, Muhammad Aslam and Javed I. Akhter

1566-1570 :

Hydrogen Sorption Property of Zr₅₅V₂₉Fe₁₆ Nanopowder Synthesized by the Plasma Arc Discharge Process
Gil-Geun Lee and Je-Shin Park

1571-1574 :

Coarsening Kinetics of Al₃Sc Precipitates in an Al–Mg–Sc Alloy Aged at 573 K
Daizen Watanabe, Chihiro Watanabe and Ryoichi Monzen

1575-1577 :

Synthesis of Tungsten Oxide Particles by Chemical Deposition Method
Wei Hao Lai, Yen Hsun Su, Lay Gaik Teoh, Yuan Tsung Tsai and Min Hsiung Hon

© 2007 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp