
Materials Transactions, Vol.48 No.5 (2007)
- 893-893 :
-
PREFACE
Susumu Ikeno, Toshio Okabe, Yoshihiko Hirotsu, Heishichiro Takahashi, Hiroshi Saijyo, Makoto Shiojiri, Kenji Matsuda
- 894-898 :
-
Observation of V Defects in Multiple InGaN/GaN Quantum Well Layers
Hung-Ling Tsai, Ting-Yu Wang, Jer-Ren Yang, Chang-Cheng Chuo, Jung-Tsung Hsu, Zhe-Chuan Feng and Makoto Shiojiri
- 899-902 :
-
Phase Analysis of Multilayered, Nanostructured Titanium-Base Alloys by Analytical Electron Microscopy
Aleksandra Czyrska-Filemonowicz and Philippe A. Buffat
- 903-908 :
-
Low-Temperature Atomic Ordering of Oriented L10-FePtCu Nanoparticles with High Areal-Density Characterized by Transmission Electron Microscopy and Electron Diffraction
Han Wool Ryu, Kazuhisa Sato and Yoshihiko Hirotsu
- 909-914 :
-
Ultra High Pressure Consolidation of Ball Milled Nanocrystalline TiTaNb Alloys
Jan Dutkiewicz, Wojciech Maziarz, Lucyna Jaworska and Kinga Zapała
- 915-918 :
-
Microstructure Analysis of Sintered Nd-Fe-B Magnets Improved by Tb-Vapor Sorption
Natsuki Watanabe, Masaru Itakura, Noriyuki Kuwano, Deshan Li, Shunji Suzuki and Ken-ich Machida
- 919-923 :
-
Nano-Meter Size WC Whiskers Grown over a Compacted Pellet of Graphite/Tungsten Powder Mixture Heated with an Ultra-Fast Heating Rate by a Concentrated Solar Beam
Susana Dias, Fernando Almeida Costa Oliveira, Bernard Granier, Jean-Marie Badie, Jorge Cruz Fernandes, Luis Guerra Rosa and Nobumitsu Shohoji
- 924-930 :
-
Ion Implantation Induced Martensite Nucleation in SUS301 Steel
Hiroshi Kinoshita, Heishichiro Takahashi, Dwi Gustiono, Norihito Sakaguchi, Tamaki Shibayama and Seiichi Watanabe
- 931-935 :
-
Characterisation of the Micro- and Nanoscale Structure of New Creep-Resistant Steels for Use in Advanced USC Steam Power Plants
Anna Zielińska-Lipiec and Aleksandra Czyrska-Filemonowicz
- 936-939 :
-
Dopant Contrast in Semiconductors as Interpretation Challenge at Imaging by Electrons
Luděk Frank, Filip Mika, Miloš Hovorka, Dimitrii Valdaitsev, Gerd Schönhense and Ilona Müllerová
- 940-943 :
-
Acquisition of the Angular Distribution of Backscattered Electrons at Low Energies
Ilona Müllerová, Ivo Konvalina and Luděk Frank
- 944-948 :
-
Cathode Lens Mode of the SEM in Materials Science Applications
Luděk Frank, Ilona Müllerová, Kenji Matsuda and Susumu Ikeno
- 949-953 :
-
Layer or Strip Resistance Measurement by Electron Beam Induced Current Technique in a Scanning Electron Microscope
Andrzej Czerwinski, Mariusz Płuska, Jacek Ratajczak, Anna Szerling and Jerzy Kątcki
- 954-959 :
-
HRTEM Observation of Age Hardening Precipitates in Mg-8.3%Gd-3.7%Y-0.76%Zr Alloy
Tokimasa Kawabata, Yuya Fukuda, Kenji Matsuda, Shigeharu Kamado, Yo Kojima and Susumu Ikeno
- 960-966 :
-
Effects of Mechanical Stirring and Vibration on the Microstructure of Hypereutectic Al-Si-Cu-Mg Alloy Billets
Hidetoshi Takagi, Yasuhiro Uetani, Masayoshi Dohi, Tomokazu Yamashita, Kenji Matsuda and Susumu Ikeno
- 967-974 :
-
Cu Segregation around Metastable Phase in Al-Mg-Si Alloy with Cu
Kenji Matsuda, Daisuke Teguri, Tatsuo Sato, Yasuhiro Uetani and Susumu Ikeno
- 975-979 :
-
Excimer Laser Annealing of Hydrogen Modulation Doped a-Si Film
Akira Heya, Naoto Matsuo, Tadashi Serikawa and Naoya Kawamoto
- 980-983 :
-
Terahertz Wave Generation from GaP with Continuous Wave and Pulse Pumping in the 1–1.2 μm Region
Tadao Tanabe, Jun-ichi Nishizawa, Ken Suto, Yusuke Watanabe, Tetsuo Sasaki and Yutaka Oyama
- 984-989 :
-
Dielectric Properties of Poly- and Single-Crystalline Ba1-xSrxTi2O5
XinYan Yue, Rong Tu and Takashi Goto
- 990-995 :
-
Production of Boron Carbide Reinforced 2024 Aluminum Matrix Composites by Mechanical Alloying
Cun-Zhu Nie, Jia-Jun Gu, Jun-Liang Liu and Di Zhang
- 996-1000 :
-
Ni-W Amorphous/Nanocrystalline Duplex Composite Produced by Electrodeposition
Yoshihisa Kimoto, Akihito Giga, Tadakatsu Ohkubo, Yorinobu Takigawa, K. Hono and Kenji Higashi
- 1001-1006 :
-
Influence of Size and Number of Nanocrystals on Shear Band Formation in Amorphous Alloys
Junyoung Park, Yoji Shibutani, Masato Wakeda and Shigenobu Ogata
- 1007-1011 :
-
Fundamental Study on New Zinc Distillation Process Utilizing Zinc Sulfide Reaction with Metallic Copper
Satoshi Itoh and Atsushi Kikuchi
- 1012-1016 :
-
Hydrogen Sorption in Zirconium and Relevant Surface Phenomena
Jeshin Park, Wonbaek Kim and Misook Won
- 1017-1022 :
-
Effect of Ultrasonic Wave on the Growth of Corrosion Pits on SUS304 Stainless Steel
Rongguang Wang and Keijiro Nakasa
- 1023-1028 :
-
Effect of Ca Addition on the Corrosion Resistance of Gravity Cast AZ31 Magnesium Alloy
Chang Dong Yim, Young Min Kim and Bong Sun You
- 1029-1033 :
-
Spray Degassing as a Method for Hydrogen Removal in Aluminum Melts
Ruizhi Wu, ZhiKun Qu, Baode Sun and Da Shu
- 1034-1041 :
-
Strength of Salt Core Composed of Alkali Carbonate and Alkali Chloride Mixtures Made by Casting Technique
Jun Yaokawa, Daisuke Miura, Koichi Anzai, Youji Yamada and Hiroshi Yoshii
- 1042-1049 :
-
Preparation of Ti Matrix Composites of Ti-B-C-N Systems by Spark Sintering and Their Friction and Wear Characteristics
Kazuhiro Matsugi, Gen Sasaki, Osamu Yanagisawa, Dongchun Li, Hideaki Kuramoto and Takashi Oki
- 1050-1054 :
-
Evaluation of Grinding Characteristics of Thermal Spraying Ceramics Film
Toshifumi Kubohori, Yasuyuki Inui and Toshirou Ikuta
- 1055-1059 :
-
Brazing and Interfacial Reaction of Commercially Pure Titanium with Ti-Zr-Based Filler Metals
Kotaro Matsu, Yasuyuki Miyazawa, Yoshitake Nishi and Tadashi Ariga
- 1060-1063 :
-
Development of Resistance Welding for Silicon Carbide
K. Hamasuna, C. Iwamoto, S. Satonaka, M. Nishida, R. Tomoshige and M. Fujita
- 1064-1069 :
-
Solidification Behaviour and the Evolution of Microstructure in the Laser Cladding of Aluminium on Magnesium Substrate
T. M. Yue and T. Li
- 1070-1078 :
-
Characterization of Failure Behaviors in Anisotropic Conductive Interconnection
Jong-Woong Kim, Dae-Gon Kim, Ja-Myeong Koo, Jeong-Won Yoon, Sunglak Choi, Kyung-Sik Kim, Jae-Do Nam, Hoo-Jeong Lee, Jinho Joo and Seung-Boo Jung
- 1079-1083 :
-
Thermoelectric Properties of Combustion-Synthesized Lanthanum-Doped Strontium Titanate
Lihua Zhang, Tsuyoshi Tosho, Noriyuki Okinaka and Tomohiro Akiyama
- 1084-1088 :
-
Effects of Zirconium Addition on Microstructures and Mechanical Properties of Co-29Cr-6Mo Alloy
Sang-Hak Lee, Tomo Uchikanezaki, Naoyuki Nomura, Mitsuru Nakamura and Akihiko Chiba
- 1089-1094 :
-
The Recovery of Electrode Compounds from Waste Nickel Metal Hydride Batteries by Physical Separation Techniques
Masami Tsunekawa, Mayumi Ito, Hisatoshi Furuya and Naoki Hiroyoshi
- 1095-1104 :
-
Two-Liquid Flotation: Heterocoagulation of Fine Particles in Polar Organic Solvent
Akira Otsuki, Gjergj Dodbiba and Toyohisa Fujita
- 1105-1112 :
-
Electrical and Thermal Characteristics of Pb-Free Sn-Zn Alloys for an AC-Low Voltage Fuse Element
Kazuhiro Matsugi, Gen Sasaki, Osamu Yanagisawa, Yasuo Kumagai and Koji Fujii
- 1113-1118 :
-
Improvement of Hydrogen Absorption Performance of Mechanically Alloyed Mg2Ni Powders by Silver Doping
Chin-Yi Chen and Shian-Ke Lin
- 1119-1123 :
-
Fabrication of Thin Palladium-Silver Alloy Film by Using Electroplating Technique
Shigeyuki Uemiya, Tooru Endo, Ryo Yoshiie, Wataru Katoh and Toshinori Kojima
- 1124-1130 :
-
Mechanical Properties and Phase Stability of Ti-Nb-Ta-Zr-O Alloys
Tadahiko Furuta, Shigeru Kuramoto, Junghwan Hwang, Kazuaki Nishino, Takashi Saito and Mitsuo Niinomi
- 1131-1136 :
-
Improvement in Wear Characteristics of Electric Hair Clipper Blade Using High Hardness Material
Shigetoshi Sakon, Tadashi Hamada and Norimasa Umesaki
- 1137-1142 :
-
Growth Process of Copper Particles in the Cuprous Oxide-Water System
Hoang T. Hai, Ahn J. Gwan, Kim D. Jin, Jeong S. Sohn, Kim C. Oh and Chung H. Saeng
- 1143-1148 :
-
Magnetic and Optical Properties of Isolated Magnetite Nanocrystals
Chang-Neng Shauo, Chuen-Guang Chao, Tsien Ming Wu and Hsiou-Jeng Shy
- 1149-1156 :
-
The Microstructure and Mechanical Properties of AZ31-xRE Magnesium Alloys
Chao-Chi Jain, Ching-Yuan Bai, Shi-Wei Chen and Chun-Hao Koo
- 1157-1160 :
-
Ductile Fe-Based Bulk Metallic Glass with Good Soft-Magnetic Properties
Tao Zhang, Fengjuan Liu, Shujie Pang and Ran Li
[JIM HOME]
[JOURNAL ARCHIVES]
© 2007 The Japan Institute of Metals
Comments to us :
editjt@jim.or.jp