Vol.47 No.09

Materials Transactions, Vol.47 No.9 (2006)

2115-2115 :: PREFACE
Hideo Nakajima and Naoyuki Kanetake
2116-2119 :: Fabrication of Lotus-Type Porous Ni₃Al with and without Boron
Takuya Ide, Masakazu Tane, Soong-Keun Hyun and Hideo Nakajima
2120-2124 :: Effect of Hydrogen Pressure on Moisture-Based Fabrication of Lotus-Type Porous Nickel
Hirofumi Onishi, Soong-Keun Hyun and Hideo Nakajima
2125-2130 :: Producing Technology of Aluminum Foam from Machined Chip Waste
Satoshi Tsuda, Makoto Kobashi and Naoyuki Kanetake
2131-2136 :: The Role of Foaming Agent in Structure and Mechanical Performance of Al Based Foams
Aleksandra V. Byakova, Svyatoslav V. Gnyloskurenko, Alexander I. Sirko, Yuliy V. Milman and Takashi Nakamura
2137-2142 :: Powder-Metallurgical Process for Producing Metallic Microchannel Devices
Tatsuya Ohmi, Masashi Takatoo, Manabu Iguchi, Kiyotaka Matsuura and Masayuki Kudoh
2143-2147 :: Preparation of Metallic Porous Materials by Oxide-Reduction Liquid Phase Sintering of Fe-SnO₂ Mixture
Teruo Takahashi
2148-2153 :: Processing and Characterization of a New Composite Metal Foam
Afsaneh Rabiei, Lakshmi Vendra, Nick Reese, Noah Young and Brian P. Neville
2154-2160 :: Wire Formed Cellular Metals
Ji-Hyun Lim and Ki-Ju Kang
2161-2166 :: Development of an Electrophoretic Sol-Gel Coating Process for Porous Metals
Masahiro Inoue, Soong-Keun Hyun, Katsuaki Suganuma and Hideo Nakajima
2167-2171 :: Effect of Silica Additive on the Formation of Lotus-Type Porous Alumina under Unidirectional Solidification
Shunkichi Ueno, Li Ming Lin, Soong Keun Hyun and Hideo Nakajima
2172-2177 :: Effects of Processing Parameters on Pore Morphology of Combustion Synthesized Al-Ni Foams
Makoto Kobashi, Rui-Xue Wang, Yoshikazu Inagaki and Naoyuki Kanetake
2178-2182 :: Foaming and Filling-in Behavior of Porous Aluminum in Hollow Components
Makoto Kobashi, Ryosuke Sato and Naoyuki Kanetake
2183-2187 :: Influence of Ultrasonic Agitation on Pore Formation and Growth during Unidirectional Solidification of Water-Carbon Dioxide Solution
Masakazu Tane and Hideo Nakajima
2188-2194 :: Integral Foam Moulding of Light Metals
Carolin Körner, Markus Hirschmann and Harald Wiehler
2195-2202 :: Open Celled Material Structural Properties Measurement: From Morphology To Transport Properties
Jérôme Vicente, Frédéric Topin and Jean-Vincent Daurelle
2203-2207 :: Size Effects on Tensile Strength of Lotus-Type Porous Copper
Hidekazu Sueno, Masakazu Tane, Jae-Soung Park, Soong-Keun Hyun and Hideo Nakajima
2208-2212 :: Effect of Pore Morphology on Compressive Yield Strength of Lotus-Type Porous Copper with Various Specimen Sizes
Jae-Soung Park, Soong-Keun Hyun, Hidekazu Sueno, Masakazu Tane, Hideo Nakajima, Yong-Su Um, Bo-Young Hur and Fumio Ono
2213-2218 :: Space-Filling Polyhedra as Mechanical Models for Solidified Dry Foams
Thomas Daxner, Robert D. Bitsche and Helmut J. Böhm
2219-2222 :: Fracture Behavior of Metal Foam Made of Recycled MMC by the Melt Route
Emiel Amsterdam, Norbert Babcsán, Jeff T. M. De Hosson, Patrick R. Onck and John Banhart
2223-2228 :: Superplastic Forming and Foaming of Cellular Aluminum Components
Koichi Kitazono
2229-2232 :: Electrochemical Behaviour of Lotus-Type Porous SUS304L and SUS316L Stainless Steels
Minoru Fuseya, Takuji Nakahata, Soong-Keun Hyun, Shinji Fujimoto and Hideo Nakajima
2233-2239 :: Evaluation of Bone Quality near Metallic Implants with and without Lotus-Type Pores for Optimal Biomaterial Design
Takayoshi Nakano, Tomoko Kan, Takuya Ishimoto, Yoshio Ohashi, Wataru Fujitani, Yukichi Umakoshi, Tomokazu Hattori, Yuichi Higuchi, Masakazu Tane and Hideo Nakajima
2240-2247 :: Development of Lotus-Type Porous Copper Heat Sink
Tetsuro Ogushi, Hiroshi Chiba and Hideo Nakajima
2248-2253 :: Numerical Simulation of Laser Fusion Zone Profile of Lotus-Type Porous Metals
Takuya Tsumura, Taichi Murakami, Hideo Nakajima and Kazuhiro Nakata
2254-2258 :: Laser Welding of Lotus-Type Porous Iron
Hiroyasu Yanagino, Takuya Tsumura, Hideo Nakajima, Soong-Keun Hyun and Kazuhiro Nakata
2259-2263 :: Tribological Behaviour of Lotus-Type Porous Cast Iron
Takeshi Kato, Takuji Nakahata and Hideo Nakajima
2264-2268 :: Magnetic Properties of Mechanically Milled Sm-Co Permanent Magnetic Materials with the TbCu₇ Structure
Raphael Justin Joseyphus, Alwarramanujam Narayanasamy, Raghavan Gopalan, Venkatasubramanian Chandrasekaran, Balachandran Jeyadevan and Kazuyuki Tohji
2269-2276 :: Evolution of Microstructural Banding during the Manufacturing Process of Dual Phase Steels
Francisca G. Caballero, Andrea García-Junceda, Carlos Capdevila and Carlos García de Andrés
2277-2284 :: Kinetic Features of Reactive Diffusion between Sn–5Au Alloy and Ni at Solid-State Temperatures
Yu-ichi Yato and Masanori Kajihara
2285-2291 :: Coarsening Behavior of Al₃Sc Precipitates in an Al–Mg–Sc Alloy
Chihiro Watanabe, Daizen Watanabe and Ryoichi Monzen
2292-2298 :: Two-Dimensional Time-Resolved X-ray Diffraction Study of Directional Solidification in Steels
Mitsuharu Yonemura, Takahiro Osuki, Hidenori Terasaki, Yuichi Komizo, Masugu Sato and Hidenori Toyokawa
2299-2301 :: Texture of Electroplated Copper Film under Biaxial Stress
Bo Hong, Chuan-hai Jiang and Xin-jian Wang
2302-2307 :: Effect of Boron Nitride Precipitation at Cavity Surface on Rupture Properties
Norio Shinya and Junro Kyono
2308-2311 :: Temperature-Time-Transformation Curve and Viscous Flow Deformation of Zr₅₅Cu₃₀Al₁₀Ni₅ Bulk Glassy Alloy
Shengli Zhu, Xinmin Wang, Fengxiang Qin, Katsuhiro Abe, Hisamichi Kimura and Akihisa Inoue
2312-2320 :: Effect of Nano-Scale Copper Sulfide Precipitation on Mechanical Properties and Microstructure of Rapidly Solidified Steel with Tramp Copper Element
Zhongzhu Liu, Yoshinao Kobayashi, Jian Yang, Kotobu Nagai and Mamoru Kuwabara
2321-2325 :: Be Effect on Glass-Forming Ability and Mechanical Properties of Ti-Cu-Co-Zr-Sn Bulk Metallic Glasses
X. F. Zhang, X. D. Wang, K. B. Kim and S. Yi
2326-2334 :: Nanoscopic Strength Analysis of Work-Hardened L-Grade Austenitic Stainless Steel, 316(NG)
Nobuo Nagashima and Saburo Matsuoka
2335-2340 :: Synthetic Process of Environmentally-Friendly TiO₂ Coating on Magnesium by Chemical Conversion Treatment
Takayoshi Fujino and Teppei Matzuda
2341-2347 :: Growth Behavior of Coatings Formed by Vapor Phase Aluminizing Using Fe-Al Pellets of Varying Composition
Yuki Matsuoka, Yasuo Matsunaga, Kiyokazu Nakagawa, Yoshihiro Tuda and Shigeji Taniguchi
2348-2352 :: Titanium Mesh/Rod Joined by Pulse Electric Current Sintering: Effect of Heating Rate
Airu Wang and Osamu Ohashi
2353-2357 :: Microstructure and Mechanical Properties of W-C-B Ceramics Containing VC
Shigeaki Sugiyama and Hitoshi Taimatsu
2358-2362 :: Synthesis and Thermal Stability of New Ni-Based Bulk Glassy Alloy with Excellent Mechanical Properties
Katuyoshi Arai, Wei Zhang, Fei Jia and Akihisa Inoue
2363-2367 :: Pore Defect Control in Die Casting by Compression Loading
Yoshihiko Hangai, Soichiro Kitahara and Shigeyasu Amada
2368-2372 :: Effect of β-TCP Size on Bone-Like Layer Growth and Adhesion of Osteoblast-Like Cells in Hydroxyapatite/β-TCP Composites
Hiroyuki Y. Yasuda, Mitsuhiro Aoki, Yohei Fujita, Wataru Fujitani, Yukichi Umakoshi and Akio Takaoka
2373-2376 :: Magnetic Properties of Palladium and Palladium–Platinum Alloy of Various Hydrogen Content
Masanori Hara, Junichi Sakurai, Satoshi Akamaru, Kuniaki Watanabe, Katsuhiko Nishimura, Katsunori Mori and Masao Matsuyama
2377-2380 :: FCC/HCP Martensitic Transformation and High-Temperature Shape Memory Properties in Co-Si Alloys
Toshihiro Omori, Wataru Ito, Keisuke Ando, Katsunari Oikawa, Ryosuke Kainuma and Kiyohito Ishida
2381-2386 :: Effect of Alloying Elements on fcc/hcp Martensitic Transformation and Shape Memory Properties in Co-Al Alloys
Keisuke Ando, Toshihiro Omori, Jun Sato, Yuji Sutou, Katsunari Oikawa, Ryosuke Kainuma and Kiyohito Ishida
2387-2392 :: Fabrication of the Crystal-Oriented Thermoelectric Material Bi₂Te₃ by Slip Casting under a High Magnetic Field
Toshiyuki Kuribayashi, Mun-Gyu Sung, Takashi Itoh, Kensuke Sassa and Shigeo Asai
2393-2398 :: Microstructure and Mechanical Properties of Common Straight Carbon Steels Strengthened by TiC Dispersion
QianLin Wu, Yangshan Sun, Caiding Yang, Feng Xue and Fengming Song
2399-2404 :: Effects of Zr and C Additions on Magnetic Properties and Microstructures of α-Fe/Nd₂F₁₄B Nanocomposite Magnets
H. Takehara, H. Ino, T. Ohkubo and K. Hono
2405-2412 :: Effect of Dynamically Recrystallized Grain Size on the Tensile Properties and Vibration Fracture Resistance of Friction Stirred 5052 Alloy
Kuo-Tsung Huang, Truan-Sheng Lui and Li-Hui Chen
2413-2420 :: Temperature Simulation of Pb-Free Sn-9Zn Elements for a Low Voltage Fuse
Kazuhiro Matsugi, Gen Sasaki, Osamu Yanagisawa, Yasuo Kumagai and Koji Fujii
2421-2426 :: A Kinetic Study of the Carbothermic Reduction of Zinc Oxide with Various Additives
Byung-Su Kim, Jae-Min Yoo, Jin-Tae Park and Jae-Chun Lee
2427-2433 :: The Precipitation Behavior of α₁-Plate and γ Phase in Cu-Zn-Sn Shape Memory Alloys
Cheng-An Hsu, Meng-Yin Tu, Yung-Fu Hsu and Wen-Hsiung Wang
2434-2443 :: Experimental Investigation on Earing Behavior of Aluminum/Copper Bimetal Sheet
Chih-Yuan Chen, Jui-Chao Kuo, Hao-Long Chen and Weng-Sing Hwang
2444-2447 :: Fatigue Property of Ti-5Al-13Ta Alloy Dental Castings in 0.9% NaCl Solution
Hisashi Doi, Takayuki Yoneyama, Equo Kobayashi and Takao Hanawa

[JIM HOME] [JOURNAL ARCHIVES]