Materials Transactions, Vol.47 No.3 (2006)

455-455 :

PREFACE
Kazuo Watanabe, Asaya Fujita, Keiichi Koyama

456-459 :

Structure and Magnetism of Fe(Rh,Pd) Alloys
Kazuhiko Uebayashi, Hisashi Shimizu and Hideji Yamada

460-463 :

Grüneisen's Approach to Magnetovolume Effect of Itinerant Electron Ferromagnets
Yoshinori Takahashi and Takeshi Kanomata

464-470 :

Effect of Chemical Disorder on Half-Metallicity of Fe₂CrZ (Z = IIIb, IV, Vb Element)
Shoji Ishida, Sou Mizutani, Sinpei Fujii and Setsuro Asano

471-474 :

Magnetovolume Effect and Negative Thermal Expansion in Mn₃(Cu_1-xGe_x)N
Koshi Takenaka and Hidenori Takagi

475-477 :

Electronic Structure of Ni₃AlX_y (X=B, C, H; 0<y<1)
Izumi Hase

478-481 :

Concentration Dependence of Pressure Effect in La(Fe_xSi_1-x)₁₃ Compounds
Asaya Fujita, Kazuaki Fukamichi and Tsuneaki Goto
[Erratum]

482-485 :

Control of Working Temperature of Large Isothermal Magnetic Entropy Change in La(Fe_xTM_ySi_1-x-y)₁₃ (TM=Cr, Mn, Ni) and La_1-zCe_z(Fe_xMn_ySi_1-x-y)₁₃
Shun Fujieda, Naoyuki Kawamoto, Asaya Fujita and Kazuaki Fukamichi

486-491 :

Effects of Heat Treatment on the Magnetic Phase Transition and Magnetocaloric Properties of Mn_1+δAs_1-xSb_x
Hirofumi Wada, Chie Funaba and Tetsuya Asano

492-495 :

X-ray Powder Diffraction Studies of Mn₃Ga_0.97Al_0.03C in Magnetic Fields
Keiichi Koyama, Takeshi Kanomata, Tatsuo Watanabe, Takanobu Suzuki, Hironori Nishihara and Kazuo Watanabe

496-500 :

Magnetic Properties of Weak Itinerant Electron Ferromagnet CoVSb
Takeshi Kanomata, Toshiyuki Igarashi, Hironori Nishihara, Keiichi Koyama, Kazuo Watanabe, Klaus -U. Neumann and Kurt R. A. Ziebeck

501-503 :

Pressure-Induced Metal-Insulator Transition in the Itinerant Antiferromagnet Nb_12-xTi_xO₂₉ (x=0 and 0.2)
Takashi Naka, Takayuki Nakane, Yuji Furukawa, Tadafumi Adschiri and Akiyuki Matsushita

504-504 :

PREFACE
Shuichi Miyazaki, Tomoyuki Kakeshita, Toshio Sakuma, Minoru Nishida, Yasubumi Furuya, Hideki Hosoda

505-512 :

Effect of Annealing Temperature on Microstructure and Shape Memory Characteristics of Ti–22Nb–6Zr(at%) Biomedical Alloy
Jae Il Kim, Hee Young Kim, Tomonari Inamura, Hideki Hosoda and Shuichi Miyazaki

513-517 :

Effects of Sn Content and Aging Conditions on Superelasticity in Biomedical Ti–Mo–Sn Alloys
Takashi Maeshima, Satoshi Ushimaru, Kiyoshi Yamauchi and Minoru Nishida

518-522 :

Effect of Nb Addition on Shape Memory Behavior of Ti–Mo–Ga Alloys
Hee Young Kim, Yoshinori Ohmatsu, Jae Il Kim, Tomonari Inamura, Hideki Hosoda and Shuichi Miyazaki

523-526 :

Near Net-Shape Fabrication of Superelastic NiTi Devices by Sputtering and Photoetching
Holger Rumpf, Volker Wipperfürth, Christiane Zamponi and Eckhard Quandt

527-531 :

A Microstructural Map of Crystallized NiTi Thin Film Derived from In Situ TEM Methods
Hoo-Jeong Lee, Hai Ni, David T. Wu and Ainissa G. Ramirez

532-535 :

A TiNiCu Thin Film Micropump Made by Magnetron Co-Sputtered Method
H. J. Zhang and C. J. Qiu

536-539 :

In-Situ TEM Study of the Thickness Impact on the Crystallization Features of a Near Equal-Atomic TiNi Thin Film Prepared by Planar Magnetron Sputtering
Xiaodong Han, Shengcheng Mao, Qun Wei, YueFei Zhang and Ze Zhang

540-545 :

Martensitic Transformation Behavior and Shape Memory Properties of Ti–Ni–Pt Melt-Spun Ribbons
Tomonari Inamura, Yohei Takahashi, Hideki Hosoda, Kenji Wakashima, Takeshi Nagase, Takayoshi Nakano, Yukichi Umakoshi and Shuichi Miyazaki

546-549 :

Severe Plastic Deformation of Melt-Spun Shape Memory Ti₂NiCu and Ni₂MnGa Alloys
Vladimir G. Pushin, Ruslan Z. Valiev, Yuntian T. Zhu, Dmitrii V. Gunderov, Alexander V. Korolev, Nikolai I. Kourov, Tatiana E. Kuntsevich, Eduard Z. Valiev and Lyudmila I. Yurchenko

550-557 :

Fabrication of TiNi Powder by Mechanical Alloying and Shape Memory Characteristics of the Sintered Alloy
Akira Terayama, Hideki Kyogoku, Masaru Sakamura and Shinichiro Komatsu

558-563 :

Shape Recovery Characteristics of NiTi Foams Fabricated by a Vacuum Process Applied to a Slurry
Noriaki Sakurai and Junjiro Takekawa

564-570 :

Elastic Energy Analysis of Carbide and Nitride-Type Precipitates in an Fe–Mn–Si–Cr Shape Memory Alloy
Susan Farjami and Hiroshi Kubo

571-579 :

Mechanical Properties of Fe–Mn–Si Based SMA and the Application
Akikazu Sato, Hiroshi Kubo and Tadakatsu Maruyama

580-583 :

Development of Prestressed Concrete Using Fe–Mn–Si-Based Shape Memory Alloys Containing NbC
Takahiro Sawaguchi, Takehiko Kikuchi, Kazuyuki Ogawa, Setsuo Kajiwara, Yosaku Ikeo, Masarou Kojima and Takatoshi Ogawa

584-586 :

The Synthesis of Composite Particles in Molten Salts
Ruisong Yang, Lishan Cui and Yanjun Zheng

587-593 :

Free-Energy Density of the Shape-Memory Alloy AuZn
Jason C. Lashley, Hassel Ledbetter, Tim W. Darling, Avadh Saxena, Artur Malinowski, Michael F. Hundley, James L. Smith and Dan J. Thoma

594-598 :

Electronic Structure of B2-Type Ti–Ni–Fe Alloys Exhibiting Second-Order-Like Structural Transformation
Takuya Yamamoto, Takashi Fukuda and Tomoyuki Kakeshita

599-606 :

The Electronic Structure and Magnetic Properties of Full- and Half-Heusler Alloys
Svetlana E. Kulkova, Sergey V. Eremeev, Tomoyuki Kakeshita, Sergey S. Kulkov and Gennadiy E. Rudenski

607-611 :

Acoustic Emission as a Probe of the Kinetics of the Martensitic Transformation in a Shape Memory Alloy
Stefanus Matheus Cornelis van Bohemen, Jilt Sietsma, Roumen Petrov, Marcel Joseph Marie Hermans and Ian Malcom Richardson

612-614 :

Magnetic Properties and Martensite Structures of Ni₅₀Mn₂₈Ga₂₂ Ferromagnetic Shape Memory Alloy
Feng Chen, Zhi Y. Gao, Wei Cai and Lian C. Zhao

615-618 :

Two-Way Shape Memory Effect and Micromachine of Rapidly Solidified Ferromagnetic Fe–Pd Ribbon
Harunobu Tomita, Teiko Okazaki and Yasubumi Furuya

619-624 :

Martensitic Transformation and Microstructure of Sputter-Deposited Ni–Mn–Ga Films
Volodymyr A. Chernenko, Manfred Kohl, Victor A. L'vov, Volodymyr M. Kniazkyi, Makoto Ohtsuka and Oliver Kraft

625-630 :

Magnetic-Field Induced Two-Way Shape Memory Effect of Ferromagnetic Ni₂MnGa Sputtered Films
Makoto Ohtsuka, Yuya Konno, Minoru Matsumoto, Toshiyuki Takagi and Kimio Itagaki

631-634 :

Magnetic Emission During Austenite-Martensite Transformation in Ni₂MnGa Shape Memory Alloy
Zoltán Balogh, Lajos Daróczi, Lajos Harasztosi, Dezsö L. Beke, Thomas A. Lograsso and Deborah L. Schlagel

635-638 :

Martensitic Transformation in Ni–Mn–Ga Alloy Under High Magnetic Fields
Volodymyr A. Chernenko, Victor A. Lvov, Takeshi Kanomata, Tomoyuki Kakeshita, Keiichi Koyama and Stefano Besseghini

639-644 :

Ferromagnetic Shape Memory Microactuators
Manfred Kohl, Berthold Krevet, Makoto Ohtsuka, Daniel Bruggerhl, Germany} and Yong Liu

645-649 :

Effect of Heat Treatment Atmosphere on Multistage R-Phase Transformation in an Aged Ti–51.0 at%Ni Alloy
Minoru Nishida, Kentarou Ishiuchi, Kousuke Fujishima and Toru Hara

650-657 :

Mechanical Properties of Ti–50(Pt,Ir) High-Temperature Shape Memory Alloys
Yoko Yamabe-Mitarai, Toru Hara, Seiji Miura and Hideki Hosoda

658-660 :

Transformation and Damping Characteristics of NiTi/NiTi Alloys Synthesized by Explosive Welding
Tingyong Xing, Yanjun Zheng and Lishan Cui

661-669 :

Vacuum Induction Melting of Ternary NiTiX (X=Cu, Fe, Hf, Zr) Shape Memory Alloys Using Graphite Crucibles
Zhonghua Zhangzhang@sdu.edu.cn, zhonghua.zhang@rub.de}, Jan Frenzel, Klaus Neuking and Gunther Eggeler

670-676 :

Superelastic Deformation Behaviors Based on Phase Transformation Bands in TiNi Shape Memory Alloy
Elzbieta A. Pieczyska, Hisaaki Tobushi, Stefan P. Gadaj and Wojciech K. Nowacki

677-681 :

Root-Mean-Square Displacements of Atoms in the B2-Phase of Titanium Nickelide
Vyacheslav M. Gundyrev and Vitaly I. Zel'dovich

682-690 :

SMA for Dampers in Civil Engineering
Antonio Isalgue, Francisco C. Lovey, Patrick Terriault, Ferran Martorell, Rosa Maria Torra and Vicenç Torra

691-693 :

Surface Characterization and Blood Compatibility of Diamond-Like Carbon (DLC) Films on the NiTi Alloys
Jiehe Sui, Wei Cai, Ailian Liu, Zhixue Wang and Liancheng Zhao

694-697 :

Effect of Severe Plastic Deformation on the Behavior of Ti–Ni Shape Memory Alloys
Vladimir G. Pushin, Ruslan Z. Valiev, Yuntian T. Zhu, Dmitrii V. Gunderov, Nikolai I. Kourov, Tatiana E. Kuntsevich, Alexei N. Uksusnikov and Lyudmila I. Yurchenko

698-703 :

PM Processing of Single-Phase NiTi Shape Memory Alloys by VPCR Process
Bernard Berthevillerables 31, CH-1950 Sion, Switzerland. Corresponding author, E-mail: bernard.bertheville@nitig.ch}

704-710 :

Constitutive Equation with Consideration of Slip-Deformed Martensite in the Deforming of Ti–Ni Shape Memory Alloy
Toshio Sakuma, Yuji Mihara, Yasuo Ochi and Kiyoshi Yamauchi

711-715 :

A Study on the Low Temperature Internal Friction Relaxation Peak in a Ti_49.8Ni_50.2 Alloy
Shyi-Kaan Wu, Hsin-Chih Lin and Tung-Sheng Chou

716-719 :

Effects of Cerium Addition on Martensitic Transformation and Microstructure of Ti_49.3Ni_50.7 Alloy
Wei Cai, Ailian Liu, Jiehe Sui and Liancheng Zhao

720-723 :

Theoretical Prediction on Martensitic Transformation Start-Strain of Nitinol
Wenge Zhang} and Klaus Hackl

724-727 :

Two-Way Shape Memory Effect and Its Stability in a Ti–Ni–Nb Wide Hysteresis Shape Memory Alloy
Xianglong Meng, Feng Chen, Wei Cai, Liming Wang and Liancheng Zhao

728-734 :

Effect of Pre-Strain on Transformation and Deformation Behavior in Ti–50 at%Ni Shape Memory Alloy
Toshio Sakuma, Yuji Mihara, Yasuo Ochi and Kiyoshi Yamauchi

735-741 :

Effect of Cyclic Loading on Apparent Young's Modulus and Critical Stress in Nano-Subgrained Superelastic NiTi Shape Memory Alloys
Shengcheng Mao, Xiaodong Han, Ming. H. Wu, Ze Zhang, Fei Hao, Danmin Liu, YueFei Zhang and Bihui Hou

742-749 :

Atomic Dynamics and Energetics of Martensitic Transformation in Nickel–Titanium Shape Memory Alloy
Ken-ichi Saitoh, Tomohiro Sato and Noboru Shinke

750-752 :

Suggestion of Pipe Coupling Method for Maximum and Uniform Joining Stress
K. K. Jee, J. H. Han, W. S. Jung and W. Y. Jang

753-758 :

Appearance of Two-Way Strain in Shape Memory Effect of Ti–Ni–Nb Alloy —Influence of Applied Strain on Two-Way Strain—
Keisuke Okita, Nagatoshi Okabe, Tomoyuki Sato and Takashi Nakao

759-765 :

Influence of Strain Ratio on Bending Fatigue Life and Fatigue Crack Growth in TiNi Shape-Memory Alloy Thin Wires
Ryosuke Matsui, Yoshiyasu Makino, Hisaaki Tobushi, Yuji Furuichi and Fusahito Yoshida

766-771 :

Local Strain Distribution Arising in Shape Memory Alloy Composite Subjected to Thermal Loading
Go Murasawa and Satoru Yoneyama

772-779 :

Effects of Applied Strain and Subsequent Heat Treatment at Intermediate Temperature on Mechanical Properties of a Thin Plate Ti–51 at% Ni Shape Memory Alloy
Hiromasa Semba, Nagatoshi Okabe, Toru Yamaji, Keisuke Okita and Kiyoshi Yamauchi

780-786 :

Influence of Cyclic Loading on Inhomogeneous Deformation Behavior Arising in NiTi Shape Memory Alloy Plate
Go Murasawa, Satoru Yoneyama, Toshio Sakuma and Masahisa Takashi

787-791 :

Effect of Cold Working on Transformation and Deformation Behavior after Pre-Deforming in Ti–50 at%Ni Shape Memory Alloy
Toshio Sakuma, Yuji Mihara, Hirotada Toyama, Yasuo Ochi and Kiyosi Yamauchi

792-794 :

Influence of Carburization on Dynamic Impact Behavior of NiTiCu Alloy
RenBo Xu, LiShan Cui and YanJun Zheng

795-804 :

Structure and Properties of the Ti–50.0 at%Ni Alloy after Strain Hardening and Nanocrystallizing Thermomechanical Processing
Vladimir Brailovski, Sergei D. Prokoshkin, Irina Yu. Khmelevskaya, Karine E. Inaekyan, Vincent Demerscole de technologie supérieure}, Sergei V. Dobatkin and Evgeny V. Tatyanin

805-810 :

One-Dimensional Anti-Phase Structures Based on an Mg₁₂Ce (Mn₁₂Th-Type) Structure in an Mg₉₁Ce₆Zn₃ Alloy, Studied by High-Resolution Transmission Electron Microscopy and High-Angle Annular Detector Dark-Field Scanning Transmission Electron Microscopy
Masahiko Nishijima, Kenji Hiraga, Takaomi Itoi and Mitsuji Hirohashi

811-816 :

¹¹¹Cd(≤ftarrow¹¹¹In) Time Differential Perturbed Angular Correlation (TDPAC) Spectroscopy in Fe/Ag Films
Takashi Otomo, Saburo Nasu, Shotaro Morimoto, Koji Baba, Masayoshi Nishiyama and Tadashi Saito

817-821 :

Shear-Band Deformation in Amorphous Alloys and Composites
Cang Fan, Laszlo Kecskes, Tong Jiao, Hahn Choo, Akihisa Inoue and Peter Liaw

822-828 :

Fast Penetration of Sn into Ag by Diffusion Induced Recrystallization
Toshio Takenaka and Masanori Kajihara

829-837 :

Quantitative Explanation for Uphill Diffusion of Sn during Reactive Diffusion between Cu–Sn Alloys and Nb
Tomomi Yamashina and Masanori Kajihara

838-844 :

Deformation and Recrystallization of Aluminum Bicrystals Having Asymmetric Tilt Grain Boundary
Tatsuya Okada, Masashi Kotaka, Tetsuya Wada, Minoru Tagami and Fukuji Inoko

845-848 :

Microstructure Characterization and Mechanical Properties of TiSi₂–SiC–Ti₃SiC₂ Composites Prepared by Spark Plasma Sintering
Chao Qin, Lianjun Wang, Wan Jiang, Shengqiang Bai and Lidong Chen

849-853 :

Synthetic Process of Titanium Dioxide Coating on Aluminum by Chemical Conversion Method
Takayoshi Fujino and Teppei Matzuda

854-860 :

Activity of Iron Oxide in Magnesiowüstite in Equilibrium with Solid Metallic Iron
Masakatsu Hasegawa, Tatsuro Tsukamoto and Masanori Iwase

861-863 :

Relationship between X-ray Intensity and Electric Bias on Al₂O₃ Surface during Low Energy Ga⁺ Irradiation
Jiancun Rao, Minghui Song, Renchao Che, Masaki Takeguchi and Kazuo Furuya

864-867 :

Separation of Fe and Sn–Cu Phases in an Fe–Sn–Cu–B System
Hideki Ono-Nakazato, Kenji Taguchi, Daisuke Kawauchi and Tateo Usui

868-873 :

Enhancing Effect on Photocatalitic Activity of TiO₂/Pt/Al₂O₃ and TiO₂/Sn/Al₂O₃ Films on Anodically Oxidized Aluminum
Takanori Hattori and Takayoshi Fujino

874-882 :

Mechanical Properties of 5052/2017 Dissimilar Aluminum Alloys Deposit by Friction Surfacing
Hiroshi Tokisue, Kazuyoshi Katoh, Toshikatsu Asahina and Toshio Usiyama

883-888 :

Effect of Die-Surface Treatment on Magnesium Alloys Fluidity
Lu Hsueh-Shang, Jun Yaokawa and Koichi Anzai

889-897 :

Building Ultra-Thin Layers by Ceramic Laser Sintering
Hwa-Hsing Tang

898-902 :

Heating of Metal Particles in a Single-Mode Microwave Applicator
Noboru Yoshikawa, Etsuko Ishizuka and Shoji Taniguchi

903-906 :

Microwave Dielectric Properties of the (1-x)La_2/3TiO₃–xLa(Ti_1/2Mg_1/2)O₃ System
Aimin Yang, Huixin Lin, Lan Luo and Wei Chen

907-912 :

In Situ Observations of Magnetization Process in Alnico Magnets by Electron Holography and Lorentz Microscopy
Joong Jung Kim, Hyun Soon Park, Daisuke Shindo, Satoshi Hirosawa and Hideyuki Morimoto

913-922 :

Eco-Efficiency (Factor X) for Electrical and Electronic Products and a Case Study on Home Appliances in a Household
Taeko Aoe

923-930 :

Preparation and Characterisation of Mg–Al Layered Double Hydroxides Intercalated with 2-Naphthalene Sulphonate and 2,6-Naphthalene Disulphonate
Tomohito Kameda, Masami Saito and Yoshiaki Umetsu

931-934 :

Hydriding Chemical Vapor Deposition of Metal Hydride Nano-Fibers
Itoko Saita, Takeshi Toshima, Satoshi Tanda and Tomohiro Akiyama

935-940 :

Effect of Heat Treatment on Characteristics of Plasma Sprayed Hydroxyapatite Coatings
Chun-Cheng Chen and Shinn-Jyh Ding

941-947 :

Atmospheric Pressure Plasma Treatment and Non-Flux Lead-Free-Soldering of Cu Wire and Strand
Tomohiro Okumura, Mitsuo Saitoh, Kazutaka Nishikawa, Akio Furusawa and Kenichiro Suetsugu

948-951 :

In-Situ Laser Cladding of Al₂O₃ Reaction Coating on Aluminium Alloy 7075 for Corrosion Resistance Improvement
T. M. Yue, K. J. Huang and H. C. Man

© 2003 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp