Materials Transactions Online

Materials Transactions, Vol.46 No.12 (2005)

2549-2549 :
PREFACE
Osamu Umezawa, Kohmei Halada, Yoshihiro Sugi
2550-2553 :
Waste Input--Output Material Flow Analysis of Metals in the Japanese Economy
Shinichiro Nakamura and Kenichi Nakajima
2554-2560 :
Web-Site Survey of Recent Ecomaterial Developments in Japan
Katsutoshi Yamada, Kohmei Halada and Kiyoshi Ijima
2561-2566 :
``Ecological Rucksack'' of High-Definition TVs
Taeko Aoe and Takayuki Michiyasu
2567-2573 :
Conceptual Design of Super Environment-Conscious Intelligent Composites Incorporated with Life-Cycle Program of Self-Repair and Self-Collapse and Application for Environment-Conscious Interior Planning in Buildings
Toshio Fukushima
2574-2581 :
Dense P/M Component Produced by Solid Freeform Fabrication (SFF)
Hideki Kakisawa, Kazumi Minagawa, Keisuke Ida, Katsuhiro Maekawa and Kohmei Halada
2582-2585 :
Fabrication of Composite Materials Using Al Scrap and Wasted Glass
Noboru Yoshikawa, Yuuya Nakano, Kentarou Sato and Shoji Taniguchi
2586-2591 :
Innovative Reuse of Agricultural Wastes as Industrial Raw Materials to Form Magnesium Composites
Katsuyoshi Kondoh, Hideki Oginuma, Junko Umeda and Takateru Umeda
2592-2595 :
Mechanical Properties of Mg--Al--Ca Alloy Recycled by Solid--State Recycling
Yasumasa Chino, Lee Jae-Seol, Yusuke Nakaura, Koichi Ohori and Mamoru Mabuchi
2596-2601 :
High-Speed Twin Roll Casting of Thin Aluminum Alloy Strips Containing Fe Impurities
Toshio Haga, Masaaki Ikawa, Hisaki Watari, Kenta Suzuki and Shinji Kumai
2602-2608 :
High-Speed Twin-Roll Strip Casting of Al--Mg--Si Alloys with High Iron Content
Kenta Suzuki, Shinji Kumai, Yuichi Saito and Toshio Haga
2609-2615 :
Microstructural Refinement of Hyper-Eutectic Al--Si--Fe--Mn Cast Alloys to Produce a Recyclable Wrought Material
Osamu Umezawa, Munefumi Nakamoto, Yoshiaki Osawa, Kenta Suzuki and Shinji Kumai
2616-2623 :
Mechanical Properties of Thermomechanical Treated Hyper-Eutectic Al--Si--(Fe,Mn,Cu) Materials
Osamu Umezawa
2624-2628 :
Fabrication of Porous Aluminum by Spacer Method Consisting of Spark Plasma Sintering and Sodium Chloride Dissolution
Masataka Hakamada, Yasuo Yamada, Tatsuho Nomura, Youqing Chen, Hiromu Kusuda and Mamoru Mabuchi
2629-2632 :
Evaluation of Nanoporous Aluminum Silicate Including Active Oxygen Species
Kazuhiro Mochizuki, Daisuke Hirabayashi, Yoshihiro Kojima and Kenzi Suzuki
2633-2636 :
Energy Absorption and Crushing Behaviour of Foam-Filled Aluminium Tubes
Yasuo Yamada, Takumi Banno, Zhenkai Xie and Cui'e Wen
2637-2640 :
Deformation Characteristics at Elevated Temperature in Recycled 5083 Aluminum Alloy by Solid State Recycling
J. S. Lee, Y. Chino, H. Hosokawa, K. Shimojima, Y. Yamada and M. Mabuchi
2641-2646 :
Application of Nd:YAG Laser to Aluminum Alloy Sorting
Hiroshi Nishikawa, Kouhei Seo, Seiji Katayama and Tadashi Takemoto
2647-2650 :
Near-Net-Shape Fabrication of Porous Alumina-Spinel Castings
Minoru Hashiba, Akinobu Harada, Naoki Adachi, Seizo Obata, Osamu Sakurada and Koichi Hiramatsu
2651-2658 :
Seeding on the Synthesis of MCM-22 (MWW) Zeolite by Dry-Gel Conversion Method and its Catalytic Properties on the Skeleton Isomerization and the Cracking of Hexane
Shyamal Kumar Saha, Pusparatu, Kenichi Komura, Yoshihiro Kubota and Yoshihiro Sugi
2659-2667 :
Zincoaluminophosphate Molecular Sieves with AFI and ATS Topologies: Synthesis by Dry-Gel Conversion Methods and Their Catalytic Properties in the Isopropylation of Biphenyl
Shyamal Kumar Saha, Hiroyoshi Maekawa, Suresh B. Waghmode, Shafeek A. R. Mulla, Kenichi Komura, Yoshihiro Kubota, Yoshihiro Sugi and Sung June Cho
2668-2672 :
Synthesis of Poly(Methylacrylate-b-ε-Caprolactone) and Application to Compatibilizer for Poly(L-Lactide)/Poly(ε-Caprolactone) Blend System
Naohisa Tamura, Kazuhiro Ban, Shinya Takahashi and Tomoyuki Kasemura
2673-2678 :
Gas Adsorption Properties of Woodceramics
Riko Ozao, Toshihiro Okabe, Tadashi Arii, Yuko Nishimoto, Yan Cao, Nathan Whitely and Wei-Ping Pan
2679-2684 :
Woodceramic Heating Elements for Low Temperature Heating
Junichiro Tsuji, Riko Ozao, Toshihiro Okabe, Toshikazu Suda and Ryoichi Yamamoto
2685-2689 :
Surface Structure of Woodceramics Manufactured from Cedar
Yutaka Sawada, Sachiko Sezaki, Riko Ozao, Yuko Nishimoto, Toshihiro Okabe, Mieko Ide and Azusa Shida
2690-2693 :
Carrier-Concentration-Dependent Transport and Thermoelectric Properties of PbTe Doped with Sb2Te3
Pinwen Zhu, Yoshio Imai, Yukihiro Isoda, Yoshikazi Shinohara, Xiaopeng Jia and Guangtian Zou
2694-2698 :
Photocatalytic Decomposition of Acetaldehyde over Rubidium Bismuth Niobates under Visible Light Irradiation
Tetsuya Kako and Jinhua Ye
2699-2703 :
Substitution Effects of the Trivalent Cations M3+ on the Photophysical and Photocatalytic Properties of In12NiM2Ti10O42 (M = Al, Cr, Ga)
Defa Wang and Jinhua Ye
2704-2708 :
Evaluation of a New Hydrogen Generating System: Ni-Rich Magnesium Alloy Catalyzed by Platinum Wire in Sodium Chloride Solution
Chi-Yuan Cho, Kuo-Huang Wang and Jun-Yen Uan
2709-2712 :
Ammonia Decomposition Catalyst with Resistance to Coexisting Sulfur Compounds
Shigeyuki Uemiya, Masayuki Uchida, Hiroshi Moritomi, Ryo Yoshiie and Makoto Nishimura
2713-2718 :
LCA of Manufacturing Lead-Free Copper Alloys
Atsushi Nakano, Nurul Taufiqu Rochman and Hidekazu Sueyoshi
2719-2724 :
Removal of Lead from Copper Alloy Scraps by Compound-Separation Method
Atsushi Nakano, Nurul Taufiqu Rochman and Hidekazu Sueyoshi
2725-2729 :
Influence of an Immersion Gold Plating Layer on Reliability of a Lead-Free Solder Joint
Ikuo Shohji, Hiroki Goto, Kiyotomo Nakamura and Toshikazu Ookubo
2730-2736 :
Comparison of Lead-Free Solder Joints Made by Immersion Gold Plating with Those Produced by Autocatalytic Electroless Gold Plating
Kiyotomo Nakamura, Ikuo Shohji, Hiroki Goto and Toshikazu Ookubo
2737-2744 :
Reliability of Solder Joint with Sn--Ag--Cu--Ni--Ge Lead-Free Alloy under Heat Exposure Conditions
Ikuo Shohji, Satoshi Tsunoda, Hirohiko Watanabe, Tatsuhiko Asai and Megumi Nagano
2745-2745 :
PREFACE
Akihisa Inoue, Junji Saida
2746-2750 :
Viscosity Measurements of Zr55Cu30Al10Ni5 and Pd40Cu30Ni10P20 Supercooled Liquid Alloys by Using a Penetration Viscometer
T. Yamasaki, S. Maeda, Y. Yokoyama, D. Okai, T. Fukami, H. M. Kimura and A. Inoue
2751-2754 :
Compositional Dependent Amorphization in Zr Alloy Films by Means of Ni-Implantation
Shinji Muraishi, Hirono Naito and Tatuhiko Aizawa
2755-2761 :
Evolution of Mechanical Properties of Cast Zr50Cu40Al10 Glassy Alloys by Structural Relaxation
Yoshihiko Yokoyama, Yasutake Akeno, Toru Yamasaki, Peter K. Liaw, Raymond. A. Buchanan and Akihisa Inoue
2762-2767 :
Nucleation and Growth in Undercooled Melts of Bulk-Metallic-Glass Forming Zr60Ni25Al15 Alloy
Hideyuki Yasuda, Yuki Tamura, Tomoya Nagira, Itsuo Ohnaka, Yoshihiko Yokoyama and Akihisa Inoue
2768-2772 :
Friction Welding of Zr55Al10Ni5Cu30 Bulk Metallic Glasses
Hyung-Seop Shin, Young-Jin Jeong, Ho-Yeon Choi, Hidemi Kato and Akihisa Inoue
2773-2776 :
Bulk Glassy Fe--Mo--Ga--P--C--B--Si Alloys with High Glass-Forming Ability and Good Soft Magnetic Properties
Masahiro Akiba, Baolong Shen and Akihisa Inoue
2777-2780 :
Formation and Mechanical Properties of Porous Pd--Pt--Cu--P Bulk Glassy Alloys
Takeshi Wada, Kana Takenaka, Nobuyuki Nishiyama and Akihisa Inoue
2781-2784 :
Local Atomic Structures of Amorphous Fe80B20 and Fe70Nb10B20 Alloys Studied by Electron Diffraction
Akihiko Hirata, Yoshihiko Hirotsu and Eiichiro Matsubara
2785-2790 :
Comparative Study on Glassy Phase Stabilities of Zr--Co--Al and Zr--Ni--Al Metallic Glasses
Masashi Hasegawa, Tsuyoshi Taketomi, Hidemi Kato, Tsunehiro Takeuchi, Uichirou Mizutani and Akihisa Inoue
2791-2798 :
Free-Energy Analysis of the Zr--Ni--Al Bulk Metallic Glass from the Local Atomic Arrangements of the Relevant Crystals
Tsunehiro Takeuchi, Sakura Nakano, Masashi Hasegawa, Kazuo Soda, Hirokazu Sato, Uichiro Mizutani, Keiji Itoh and Toshiharu Fukunaga
2799-2802 :
High-Energy X-ray Diffraction Study of Liquid Structure of Metallic Glass-Forming Zr70Cu30 Alloy
Akitoshi Mizuno, Seiichi Matsumura, Masahito Watanabe, Shinji Kohara and Masaki Takata
2803-2806 :
Incident Photon-Energy Dependence of the Electronic Density of States in Pd42.5Ni7.5Cu30P20 Metallic Glass
Shinya Hosokawa, Naohisa Happo, Hitoshi Sato, Masaki Taniguchi, Tetsu Ichitsubo, Masaki Sakurai, Eiichiro Matsubara and Nobuyuki Nishiyama
2807-2810 :
Undercooling Behavior and Critical Cooling Rate of Pd--Pt--Cu--P Alloy
Nobuyuki Nishiyama, Kana Takenaka, Takeshi Wada, Hisamichi Kimura and Akihisa Inoue
2811-2816 :
Kinetics of Glass Transition Simulated by Path Probability Method
Tetsuo Mohri and Yoshitaka Kobayashi
2817-2829 :
Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element
Akira Takeuchi and Akihisa Inoue
2830-2837 :
Structural Relaxation in Supercooled Liquids
Masato Shimono and Hidehiro Onodera
2838-2843 :
Thermodynamic Modeling of the Undercooled Liquid in the Ni--Zr System
Taichi Abe, Hidehiro Onodera, Masato Shimono and Machiko Ode
2844-2847 :
Thermal Stability and Magnetic Properties of Fe--Nd--Al Amorphous Alloys
Ding Chen, Akira Takeuchi and Akihisa Inoue
2848-2855 :
Effects of Atomic Deviatoric Distortion on Local Glass Transition of Metallic Glasses
Junyoung Park, Yoji Shibutani, Shigenobu Ogata and Masato Wakeda
2856-2863 :
Cutting Characteristics of Bulk Metallic Glass
Kazutaka Fujita, Yasuo Morishita, Nobuyuki Nishiyama, Hisamichi Kimura and Akihisa Inoue
2864-2869 :
Effect of Microstructural Change on High-Temperature Deformation in Pre-Annealed Zr65Al10Ni10Cu15 Bulk Metallic Glass
Junpei Kobata, Hiroshi Tsuda, Yorinobu Takigawa and Kenji Higashi
2870-2874 :
Characteristics of Shear Bands and Fracture Surfaces of Zr65Al7.5Ni10Pd17.5 Bulk Metallic Glass
Kyosuke Yoshimi, Hidemi Kato, Junji Saida and Akihisa Inoue
2875-2879 :
Molecular Dynamics Simulation on Anelasticity under Tensile and Shearing Stresses in Single Component Amorphous Metal
Kazutaka Fujita, Junji Ohgi, Vasek Vitek, Tao Zhang and Akihisa Inoue
2880-2885 :
Primary Crystallization of an Al88Gd6Er2Ni4 Metallic Glass
N. Tian, M. Ohnuma, T. Ohkubo and K. Hono
2886-2892 :
Relaxation and Crystallization Behavior of the Zr50Cu40Al10 Metallic Glass
Takaaki Yano, Yuhi Yorikado, Yasutake Akeno, Fuminobu Hori, Yoshihiko Yokoyama, Akihiro Iwase, Akihisa Inoue and Toyohiko J. Konno
2893-2897 :
Effect of Al on Local Structures of Zr--Ni and Zr--Cu Metallic Glasses
Shigeo Sato, Takashi Sanada, Junji Saida, Muneyuki Imafuku, Eiichiro Matsubara and Akihisa Inoue
2898-2907 :
Transformation to Nanocrystallites in Amorphous Alloys Induced by Resonant Electropulsing
Ting Hao, Hisanori Tanimoto and Hiroshi Mizubayashi
2908-2914 :
Relationship between Deformation and Crystallization in Zr60Al15Ni25 and Zr65Al7.5Cu27.5 Metallic Glass
Takeshi Nagase, Mitsuo Nakamura and Yukichi Umakoshi
2915-2919 :
Is There a Link between Melt Fragility and Elastic Properties of Metallic Glasses?
Livio Battezzati
2920-2930 :
Thermodynamic Analysis of the Phase Equilibria of the Nb--Ni--Ti System
Satoshi Matsumoto, Tatsuya Tokunaga, Hiroshi Ohtani and Mitsuhiro Hasebe
2931-2939 :
Evaluation of the Glass-Forming Ability of Zr--Ti--Be Ternary Alloys Using the CALPHAD-Type Approach
Tatsuya Tokunaga, Hiroshi Ohtani and Mitsuhiro Hasebe
2940-2944 :
Magnetic Properties of Pr--Fe--Al Alloys Produced by the Metallic Mold Casting Method
Tetsuji Saito
2945-2948 :
Effect of Minor Au Addition on Glass-Forming Ability and Mechanical Properties of Pd--Cu--Au--Si--P Alloys
Li Liu, Shujie Pang, Chaoli Ma and Tao Zhang
2949-2953 :
Glass-Forming Ability and Mechanical Properties of Sm-Doped Fe--Cr--Mo--C--B Glassy Alloys
Shuhong Sheng, Chaoli Ma, Shujie Pang and Tao Zhang
2954-2958 :
Mechanical Behavior of Zr65Al10Ni10Cu15 and Zr52.5Al10Ni10Cu15Be12.5 Bulk Metallic Glasses
Weihuo Li, Bingchen Wei, Taihua Zhang, Lingchen Zhang and Yuanda Dong
2959-2962 :
Indentation Creep Behavior in Ce-Based Bulk Metallic Glasses at Room Temperature
Bingchen Wei, Taihua Zhang, Weihuo Li, Dongmei Xing, Lingchen Zhang and Yuren Wang
2963-2967 :
Synthesis of Ti-Based Bulk Metallic Glass Composites Containing WC Particles
I-Kuan Jeng and Pee-Yew Lee
2968-2974 :
Effect of Trace Additions of Ag on Precipitation in Al--Mg Alloys
Masahiro Kubota and Barry C. Muddle
2975-2980 :
Abnormal Grain Growth of Off-Cube Grains in High Purity Aluminum Foils with Cube Texture
Naoki Takata, Fuyuki Yoshida, Ken-ichi Ikeda, Hideharu Nakashima and Hiroshi Abe
2981-2987 :
Isochronal Annealing Behavior of Magnesium Alloy AZ31 after Hot Deformation
Xuyue Yang, Hiromi Miura and Taku Sakai
2988-2996 :
Microstructure Evolution in the Phase Separation of the Ni3Al0.40V0.60 Alloy
Makoto Tanimura, Toshihiro Doi and Yasumasa Koyama
2997-3000 :
Constitutive Relation of Casting Aluminum Alloy A101 Involving Void Evolution
Bin Chen, Xianghe Peng, Jinghong Fan and Songlin Chen
3001-3007 :
Elastic Deformation Behavior of Multi-Functional Ti--Nb--Ta--Zr--O Alloys
Tadahiko Furuta, Shigeru Kuramoto, Junghwan Hwang, Kazuaki Nishino and Takashi Saito
3008-3014 :
Unusual Wetting of Liquid Metals on Iron Substrate with Oxidized Surface in Reduced Atmosphere
Nobuyuki Takahira, Toshihiro Tanaka, Shigeta Hara and Joonho Lee
3015-3019 :
Characterization of Surface Oxide Film Formed on Ti--8Fe--8Ta--4Zr
Daisuke Kuroda, Yuta Tanaka, Hironori Kawasaki, Katsuhiko Asami and Takao Hanawa
3020-3025 :
Thin Film Characteristics of Sn--3.5Ag--(2.0Cu) Alloy
Fei-Yi Hung, Puo-Sheng Chen, Truan-Sheng Lui and Li-Hui Chen
3026-3029 :
Formation of Manganese Dioxide Coating with Catalytic Activity on Thick Boehmite Film by Hydrothermal Method
Takayoshi Fujino, Shinichi Yamaguchi and Takanori Hattori
3030-3036 :
Phase Relations, Activities and Minor Elements Distribution in Fe--Pb--As and Fe--Pb--Sb Systems Saturated with Carbon at 1473 K
Leandro Voisin, Hector M. Henao, Mitsuhisa Hino and Kimio Itagaki
3037-3043 :
Controllability of Mesoscopic Surface Roughness of Sputtered Al and Al--N Films
Takashi Ishiguro and Kazumi Miyamura
3044-3050 :
Characterization of Si-Based Nanoparticulates Produced by Carbothermic Reduction of Silica-Containing Slag
S. V. Komarov, D. V. Kuznetsov, O. Terakado, V. V. Levina and M. Hirasawa
3051-3058 :
Pre-Treated Effect of Friction Stir Processing of Al Alloy 5052 on Vibration Fracture Behavior under Resonant Vibration
Kuo-Tsung Huang, Truan-Sheng Lui and Li-Hui Chen
3059-3062 :
Electron Holography Study on Magnetization Process in Nanocrystalline and Microcrystalline Fe73.5Si13.5B9Nb3Cu1 Films
Young-Gil Park, Hyun Soon Park, Daisuke Shindo and Yoshihito Yoshizawa
3063-3066 :
Composition Dependence on Compressive Magnetostriction of Fe--Sm Binary Alloy Thin Films
Yoshitake Nishi, Yoshihito Matsumura, Atsushi Kadowaki and Shingo Masuda
3067-3072 :
Closed Recycling Process for Al-Based Composite Materials
Hiroyuki Sano, Shinichi Kato, Tatsuya Motomura and Toshiharu Fujisawa
3073-3076 :
Identification of Viscoplastic Properties of Individual Phases in Lead-Free Solder Alloy by Depth-Sensing Microindentation
Hiroshi Hamasaki, Kazuhiro Shinbata and Fusahito Yoshida
3077-3080 :
Surface Deformation Features in Ultrafine-Grained Copper Cyclically Stressed at Different Temperatures
X. W. Li, S. D. Wu, Y. Wu, H. Y. Yasuda and Y. Umakoshi
3081-3084 :
High-Strengthening of Mg--5.5 mass%Y--4.3 mass%Zn Cast Alloy by Friction Stir Processing
Masato Tsujikawa, Sung Wook Chung, Maho Tanaka, Yorinobu Takigawa, Sachio Oki and Kenji Higashi
3085-3088 :
Influence of Deformation Mechanism on the Superplastic Forging of High-Strength Mg Alloy by Three-Dimensional Finite Volume Simulation
Masato Tsujikawa, Sung Wook Chung, Hidetoshi Somekawa and Kenji Higashi
3089-3091 :
Correlation of Magnetic Barkhausen Emission Profile with Strength of Thermally Degraded 2.25Chromium--1Molybdenum Steel
Jai Won Byeon, Sook In Kwun, Soon-Jik Hong, Chul-Ku Lee, Kae-Myung Kang and Yongho Sohn

[JIM HOME] [JOURNAL ARCHIVES]

© 2003 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp