Materials Transactions Online

Materials Transactions, Vol.46 No.7 (2005)

1443-1451 :
Isothermal Tetragonal-to-Monoclinic Phase Transformation in a Zirconia--Yttria System
Harushige Tsubakino
1452-1452 :
PREFACE
Kaoru Kimura, Ken-ichi Takagi, Takeshi Koyanagi, Michitaka Ohtaki
1453-1455 :
Preparation and Thermoelectric Properties of NaxCoO2/Co3O4 Layered Nano-Composite
Peixin Zhu, Takahiro Takeuchi, Hiromichi Ohta, Won-Seon Seo and Kunihito Koumoto
1456-1461 :
Effect of the Polymerized Complex Process on Doping Limit of Thermoelectric NaxCo1-yMyO2 (M=Mn, Ni)
Mikio Ito and Tomoya Nagira
1462-1465 :
Thermoelectric Properties of CuAl1-xMxO2 (M=Zn, Ca)
Takuya Kurotori and Sunao Sugihara
1466-1469 :
Thermoelectric Properties of Lanthanum-Doped Europium Titanate
Hiroaki Muta, Akihiro Ieda, Ken Kurosaki and Shinsuke Yamanaka
1470-1475 :
Thermoelectric Properties of Amorphous Zinc Oxide Thin Films Fabricated by Pulsed Laser Deposition
Yoshihiro Inoue, Masaki Okamoto, Toshio Kawahara, Yoichi Okamoto and Jun Morimoto
1476-1480 :
Effect of Yb Filling on Thermoelectric Properties of Ge-Substituted CoSb3 Skutterudites
Hiroshi Mori, Hiroaki Anno and Kakuei Matsubara
1481-1484 :
Thermoelectric Properties of (Ti,Zr,Hf)CoSb Type Half-Heusler Compounds
Takeyuki Sekimoto, Ken Kurosaki, Hiroaki Muta and Shinsuke Yamanaka
1485-1489 :
Effect of Cu Substitution on Thermoelectric Properties of Ge Clathrates
Masahiro Hokazono, Hiroaki Anno and Kakuei Matsubara
1490-1496 :
Solid-State Synthesis of Thermoelectric Materials in Mg--Si--Ge System
Tatsuhiko Aizawa, Renbo Song and Atsushi Yamamoto
1497-1501 :
Thermoelectric Properties of p-Type Fe0.9Mn0.1Si2 with Rare-Earth Oxide Addition
Mikio Ito and Yuta Takiguchi
1502-1505 :
Thermoelectric Properties of Thallium Compounds with Extremely Low Thermal Conductivity
Ken Kurosaki, Atsuko Kosuga, Hiroaki Muta and Shinsuke Yamanaka
1506-1513 :
Experimental and Theoretical Evaluation on Thermoelectricity for SPS-Joined p-n Module in Bi--Te System
Sang Seok Kim, Shigeo Yamamoto, Tatsuhiko Aizawa and Atsushi Yamamoto
1514-1514 :
PREFACE
Mitsuo Niinomi, Takao Hanawa, Yoshimitsu Okazaki, Masahiko Ikeda, Akihiko Chiba, Takayuki Narushima, Hisao Fukui
1515-1524 :
Balancing of Mechanical Properties of Ti--4.5Fe--7.2Cr--3.0Al Using Thermomechanical Processing and Rapid Heat Treatment
Pavlo E. Markovsky and Masahiko Ikeda
1525-1531 :
Use of a Naphthalene-Based Binder in Injection Molding Net-Shape Titanium Components of Controlled Porosity
K. Scott Weil, Eric A. Nyberg and Kevin L. Simmons


1532-1539 :

Announcement

The following paper has been withdrawn from the database of Mater. Trans., because it had been published in another journal (Mater. Sci & Eng. C 25(2005)312-320.) as an original paper, prior to the publication in Mater.Trans. due to the authors misunderstanding of the paper category.

No more such incident shall happen in the future.

Development of New Ti--Fe--Ta and Ti--Fe--Ta--Zr System Alloys for Biomedical Applications
Daisuke Kuroda, Hironori Kawasaki, Sachiko Hiromoto and Takao Hanawa


1540-1544 :
Effect of Microstructure on Tensile Properties and Static Fracture Toughness of Dental Gold Alloy
Mitsuo Niinomi, Junji Takeda, Toshikazu Akahori, Hisao Fukui, Masashi Touyama and Hiroyuki Toda
1545-1550 :
Mechanical Property, Fatigue Strength and Clinical Trial of Dental Cast Ti--15Zr--4Nb--4Ta Alloy
Yoshimitsu Okazaki, Emiko Gotoh, Hiroshi Nakada and Kihei Kobayashi
1551-1554 :
Bending Properties of Co--Ni--Cr--Mo Alloy Wire for Orthodontic Application
Takayuki Yoneyama, Osamu Takahashi, Equo Kobayashi, Takao Hanawa and Hisashi Doi
1555-1563 :
Fatigue Property of Super-Elastic Ti--Ni Alloy Dental Castings
Jumpei Kasuga, Takayuki Yoneyama, Equo Kobayashi, Takao Hanawa and Hisashi Doi
1564-1569 :
Mechanical Properties of Biocompatible Beta-Type Titanium Alloy Coated with Calcium Phosphate Invert Glass-Ceramic Layer
Toshikazu Akahori, Mitsuo Niinomi, Yoshihiko Koyanagi, Toshihiro Kasuga, Hiroyuki Toda, Hisao Fukui and Michiharu Ogawa
1570-1577 :
Fatigue Characteristics of Low Cost β Titanium Alloys for Healthcare and Medical Applications
Gunawarman, Mitsuo Niinomi, Toshikazu Akahori, Takayuki Souma, Masahiko Ikeda, Hiroyuki Toda and Kazuhiko Terashima
1578-1587 :
Dry Friction and Wear Behavior of Forged Co--29Cr--6Mo Alloy without Ni and C Additions for Implant Applications
Kazushige Kumagai, Naoyuki Nomura, Tsukasa Ono, Masahiro Hotta and Akihiko Chiba
1588-1592 :
Friction-Wear Properties of Nickel-Free Co--Cr--Mo Alloy in a Simulated Body Fluid
Norio Maruyama, Hironori Kawasaki, Akiko Yamamoto, Sachiko Hiromoto, Hachiro Imai and Takao Hanawa
1593-1596 :
Friction-Wear Properties of Nitrogen-Ion-Implanted Nickel-Free Co--Cr--Mo Alloy
Takao Hanawa, Kozo Nakazawa, Kazuto Kano, Sachiko Hiromoto, Yoshiaki Suzuki and Akihiko Chiba
1597-1603 :
Anisotropy and Temperature Dependence of Young's Modulus in Textured TiNbAl Biomedical Shape Memory Alloy
Tomonari Inamura, Hideki Hosoda, Kenji Wakashima and Shuichi Miyazaki
1604-1609 :
The Influence of Aluminum Content on Shape Memory Effect of Ti--7Cr--Al Alloys Fabricated Using Low Grade Sponge Titanium
Masahiko Ikeda, Daisuke Sugano, Shingo Masuda and Michiharu Ogawa
1610-1617 :
Osteocompatibility of Stainless Steel, Co--Cr--Mo, Ti--6Al--4V and Ti--15Zr--4Nb--4Ta Alloy Implants in Rat Bone Tissue
Yoshimitsu Okazaki, Emiko Gotoh, Miki Nishimori, Shin-ichi Katsuda, Takeshi Manabe and Kihei Kobayashi
1618-1626 :
Biocompatibility Evaluation of Ti--15Al--33Nb(at%) and Ti--21Al--29Nb(at%)
Carl J. Boehlert, Katherine A. Rider and Lisa M. Flick
1627-1632 :
Surface Characterization and Anodic Polarization of Nitrogen-Ion-Implanted Nickel-Free Co--Cr--Mo Alloy
Sachiko Hiromoto, Kazuto Kano, Yoshiaki Suzuki, Katsuhiko Asami, Akihiko Chiba and Takao Hanawa
1633-1635 :
Hydroxyapatite Coatings on a 3D Porous Surface Using Thermal Substrate Method
Kensuke Kuroda, Shinji Nakamoto, Ryoichi Ichino, Masazumi Okido and Robert M. Pilliar
1636-1645 :
Antibacterial Metals ---A Viable Solution for Bacterial Attachment and Microbiologically Influenced Corrosion---
Kurissery R. Sreekumari, Yoshihiro Sato and Yasushi Kikuchi
1646-1650 :
Ultra-Fine Grain Development in an AZ31 Magnesium Alloy during Multi-Directional Forging under Decreasing Temperature Conditions
Jie Xing, Hiroshi Soda, Xuyue Yang, Hiromi Miura and Taku Sakai
1651-1655 :
Effect of Pressure Application by HIP on Microstructure Evolution during Diffusion Bonding
Naoya Masahashi and Shuji Hanada
1656-1662 :
Effect of Precipitation of σ-Phase and N Addition on the Mechanical Properties in 25Cr--7Ni--4Mo--2W Super Duplex Stainless Steel
Soo-Cheon Kim, Zuogui Zhang, Yuji Furuya, Chang-Yong Kang, Jang-Hyun Sung, Qing-Qing Ni, Yoshimi Watanabe and Ick-soo Kim
1663-1670 :
Ductile-to-Brittle Transition Characteristics in W--Cu Composites with Increase of Cu Content
Yutaka Hiraoka, Takeshi Inoue, Hideaki Hanado and Naoyoshi Akiyoshi
1671-1676 :
Effect of Spray Condition and Heat Treatment on the Structure and Adhesive Wear Properties of WC Cermet Coatings
Yasunari Ishikawa, Jin Kawakita and Seiji Kuroda
1677-1680 :
Compressive Deformation Behavior at Elevated Temperatures in a Closed-Cell Aluminum Foam
Masataka Hakamada, Tatsuho Nomura, Yasuo Yamada, Yasumasa Chino, Youqing Chen, Hiromu Kusuda and Mamoru Mabuchi
1681-1686 :
Strengthening of Ti--6Al--4V Alloy by Short-Time Duplex Heat Treatment
Tatsuro Morita, Kei Hatsuoka, Takashi Iizuka and Kazuhiro Kawasaki
1687-1691 :
Electrical Resistance Change due to Hydrogenation of Pd and Pd--Ni Thin Films Immersed in Hydrogen-Dissolved Water
Shin-ichi Yamaura, Tokujiro Yamamoto, Hisamichi Kimura and Akihisa Inoue
1692-1694 :
Glass Formation and Thermal Stability of Bulk Glassy Cu--Zr--Ti--Sn--Si Alloys
Hua Men and Tao Zhang
1695-1700 :
Fabrication of Nano-Sized Powders from Waste Solution by Spray Pyrolysis Process
Jaekeun Yu, Gyeonghwan Kim, Taeksoo Kim and Jwayeon Kim
1701-1705 :
Gamma-Radiation Effect on Morphology and Properties of TTCP/DCPA-Derived Calcium Phosphate Cement
I-Chang Wang, Chien-Ping Ju and Jiin-Huey Chern Lin
1706-1710 :
Development of Glassy Alloy Separators for a Proton Exchange Membrane Fuel Cell (PEMFC)
Akihisa Inoue, Takayoshi Shimizu, Shin-ichi Yamaura, Yuichiro Fujita, Shinobu Takagi and Hisamichi Kimura
1711-1719 :
Strain Rate Sensitivity of Superplastic Inconel 718
Marta Urdanpilleta, José Manuel Martínez-Esnaola and Javier Gil Sevillano
1720-1724 :
New Pd-Based Bulk Glassy Alloys with High Glass-Forming Ability and Large Supercooled Liquid Region
Kana Takenaka, Takeshi Wada, Nobuyuki Nishiyama, Hisamichi Kimura and Akihisa Inoue
1725-1732 :
Fracture Toughness of Zr55Al10Ni5Cu30 Bulk Metallic Glass by 3-Point Bend Testing
Asahi Kawashima, Hiroaki Kurishita, Hisamichi Kimura, Tao Zhang and Akihisa Inoue
1733-1736 :
Mechanical Properties and Electrical Conductivity of Heavily Cold-Rolled Cu100-xZrx Alloys (x=0--8)
Hisamichi Kimura, Akihisa Inoue, Kenichiro Sasamori, Hajime Yoshida and Osami Haruyama
1737-1740 :
Grain Growth Mechanism of Cu Thin Films
Masanori Murakami, Miki Moriyama, Susumu Tsukimoto and Kazuhiro Ito
1741-1744 :
Manufacture of Aluminum/Carbon Composites Based on Wood Templates
Tian-Chi Wang, Tong-Xiang Fan, Di Zhang and Guo-Ding Zhang

[JIM HOME] [JOURNAL ARCHIVES]

© 2003 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp