
Materials Transactions, Vol.46 No.6 (2005)
- 1083-1087 :
-
Enhanced Phenomena in Metals with Electric and Magnetic Fields: I Electric Fields
Hans Conrad
- 1088-1092 :
-
Enhanced Phenomena in Metals with Electric and Magnetic Fields: II Magnetic Fields
Masato Enomoto
- 1093-1093 :
-
PREFACE
Masahiko Morinaga, Tesuo Mohri
- 1094-1099 :
-
Electronic and Lattice Properties of Layered Hexagonal Compounds Under Anisotropic Compression: A First-Principles Study
Kazuaki Kobayashi
- 1100-1102 :
-
Ab Initio All-Electron GW Calculation of Lithium Chloride Crystal
Shohei Iwata, Soh Ishii and Kaoru Ohno
- 1103-1105 :
-
Instability of Dianions of Alkali-Metal Clusters
Yoshifumi Noguchi, Soh Ishii and Kaoru Ohno
- 1106-1111 :
-
Local Geometry and Energetics of Hydrogen in Orthorhombic SrZrO3
Yi Liu, Masahito Yoshino, Kazuyoshi Tatsumi, Isao Tanaka, Masahiko Morinaga and Hirohiko Adachi
- 1112-1116 :
-
First Principles Calculation of Defect Structure in Non-stoichiometric CoAl and CoTi
Masataka Mizuno, Hideki Araki and Yasuharu Shirai
- 1117-1121 :
-
Elastic Constants of AlLi from First Principles
Tokuteru Uesugi, Yorinobu Takigawa and Kenji Higashi
- 1122-1126 :
-
First-Principles Study of the Electronic Properties of γ/γ' Interface in Ni Based Superalloys
Cuiyu Geng, Chongyu Wang, Jian-Tao Wang and Tao Yu
- 1127-1130 :
-
Thermodynamic Properties of Transition Metals Using Face-Centered-Cubic Lattice Model with Renormalized Potentials
Ryoji Sahara, Hiroshi Mizuseki, Kaoru Ohno and Yoshiyuki Kawazoe
- 1131-1139 :
-
Local Electronic Structure and Protonic Conductivity in Perovskite-Type Oxide, SrZrO3
Masahito Yoshino, Katsuya Kato, Etty Mutiara, Hiroshi Yukawa and Masahiko Morinaga
- 1140-1147 :
-
Interaction between Substitutional and Interstitial Elements in α iron Studied by First-principles Calculation
Hideaki Sawada, Kazuto Kawakami and Masaaki Sugiyama
- 1148-1153 :
-
Atomic Bonding and Properties of Al--Mg--Sc Alloy
Gao Yingjun, Huang Chuanggao, Hou Xianhua, Mo Qifeng and Liu Hui
- 1154-1160 :
-
Compressive Deformation Simulation of Regularly Cell-Structured Materials with Various Column Connectivity
Kanyatip Tantikom and Tatsuhiko Aizawa
- 1161-1166 :
-
High-Pressure Elasticity and Auxetic Property of α-Cristobalite
Hajime Kimizuka, Shigenobu Ogata and Yoji Shibutani
- 1167-1174 :
-
Equilibrium between Fluorite and Pyrochlore Structures in the ZrO2--Nd2O3 System
Hiroshi Ohtani, Satoshi Matsumoto, Bo Sundman, Taketo Sakuma and Mitsuhiro Hasebe
- 1175-1179 :
-
Development of New Equilibrium Calculation Software: CaTCalc
Kazuhisa Shobu and Tatsuo Tabaru
- 1180-1186 :
-
Glass Transition within Cluster Variation and Path Probability Methods
Tetsuo Mohri
- 1187-1192 :
-
Computer Simulation of Phase Decomposition in Fe--Cu--Mn--Ni Quaternary Alloy Based on the Phase-Field Method
Toshiyuki Koyama and Hidehiro Onodera
- 1193-1198 :
-
Thermodynamic Study of Phase Equilibria in the Ni--Fe--B System
Tatsuya Tokunaga, Hiroshi Ohtani and Mitsuhiro Hasebe
- 1199-1207 :
-
Experimental Verification of Magnetically Induced Phase Separation in αCo Phase and Thermodynamic Calculations of Phase Equilibria in the Co--W System
Jun Sato, Katsunari Oikawa, Ryosuke Kainuma and Kiyohito Ishida
- 1208-1213 :
-
Phase Field Simulation of the Effect of Anisotropy in Grain Boundary Energy on Growth kinetics and Morphology of Grain Structure
Yoshihiro Suwa and Yoshiyuki Saito
- 1214-1220 :
-
Computer Simulation of Grain Growth in Three Dimensions by the Phase Field Model and the Monte Carlo Method
Yoshihiro Suwa and Yoshiyuki Saito
- 1221-1229 :
-
Computational Study of Compressive Mechanical Response in Two-dimensional Cellular Solids under Microstructural Control
Yoshihiro Suwa, Toshiji Mukai and Tatsuhiko Aizawa
- 1230-1234 :
-
Experimental and Computational Investigation of Formation of Precipitate Free Zones in an Al--Cu Alloy
Shoichi Hirosawa, Yoshifumi Oguri and Tatsuo Sato
- 1235-1239 :
-
Molecular Dynamics Simulation on the Single Particle Impacts in the Aerosol Deposition Process
Hiroshi Ogawa
- 1240-1247 :
-
Thermodynamic and Structural Properties for the FeO--SiO2 System by using Molecular Dynamics Calculation
Won-Gap Seo and Fumitaka Tsukihashi
- 1248-1254 :
-
Computer Simulation of Multiphase Binary Diffusion in Gas--Solid Type Couples
Shinji Tsuji
- 1255-1260 :
-
Dynamic Simulation of Multiplier Effects of Helium Plasma and Neutron Irradiation on Microstructural Evolution in Tungsten
Qiu Xu, Naoaki Yoshida and Toshimasa Yoshiie
- 1261-1263 :
-
Sample Length Dependence of Giant Magnetoimpedance in Fe--Zr--Nb--Cu--B Nanocrystalline Ribbons
Hongwei Qin, Xiaojun Yu, Bo Li, Yanming Hao, Shanxing Huang, Jifan Hu and Minhua Jiang
- 1264-1270 :
-
Characterization of Nanocrystal Dispersed Cu60Zr30Ti10 Metallic Glass
D. Nagahama, T. Ohkubo, T. Mukai and K. Hono
- 1271-1273 :
-
Elastic Properties of Sn-Based Pb-Free Solder Alloys Determined by Ultrasonic Pulse Echo Method
Hiroyuki Tanaka, Lang Feng Qun, Osamu Munekata, Toshihiko Taguchi and Toshio Narita
- 1274-1277 :
-
Effect of Deformation on Damping Capacity and Microstructure of Fe--22%Mn--8%Co Alloy
Young-Seob Seo, Young-Kook Lee and Chong-Sool Choi
- 1278-1287 :
-
Characterisation of Quasicrystalline Particles in an Isothermally Aged Al--10Mg--0.5Ag (mass%) Alloy
Masahiro Kubota, Jian Feng Nie and Barry C. Muddle
- 1288-1294 :
-
Identification of Metastable Rod-Like Particles in an Isothermally Aged Al--10Mg--0.5Ag (mass%) Alloy
Masahiro Kubota, Jian Feng Nie and Barry C. Muddle
- 1295-1300 :
-
Intermetallic Compound Formation and Growth Kinetics in Flip Chip Joints Using Sn--3.0Ag--0.5Cu Solder and Ni--P under Bump Metallurgy
Dae-Gon Kim and Seung-Boo Jung
- 1301-1305 :
-
Evaluation of Grain Boundary Effect on Strength of Fe--C Low Alloy Martensitic Steels by Nanoindentation Technique
Jinxu Li, Takahito Ohmura and Kaneaki Tsuzaki
- 1306-1310 :
-
Effect of Hydrogen on Damping Capacity of Ti50Ni25Cu25 Alloy
Takuya Sakaguchi, Tomohisa Ueura, Yasuo Kogo, Shin Takeuchi and Naohiro Igata
- 1311-1317 :
-
Theoretical Analysis on Crystal Alignment of Feeble Magnetic Materials under High Magnetic Field
Cunyou Wu, Shuqin Li, Kensuke Sassa, Yasumasa Chino, Kazutoshi Hattori and Shigeo Asai
- 1318-1323 :
-
Thermal Cycle Resistance of Yttria Stabilized Zirconia Coatings Prepared by MO-CVD
Rong Tu and Takashi Goto
- 1324-1330 :
-
Prediction of Granulated Slag Properties Produced from Spinning Disk Atomizer by Mathematical Model
Hadi Purwanto, Toshio Mizuochi and Tomohiro Akiyama
- 1331-1334 :
-
Oxidation of Pd--Al(111) Epitaxial Films in Ultra-High Vacuum
Michiko Yoshitake, Yasuhiro Yamauchi and Weijie Song
- 1335-1340 :
-
Thermodynamic Property of B in Molten Si and Phase Relations in the Si--Al--B System
Takeshi Yoshikawa and Kazuki Morita
- 1341-1347 :
-
Laser Cladding of Fe--Cr--C Alloys on A5052 Aluminum Alloy Using Diode Laser
Shingo Iwatani, Yasuhito Ogata, Keisuke Uenishi, Kojiro F. Kobayashi and Akihiko Tsuboi
- 1348-1353 :
-
Vapor Pressure Measurements for Metal Chloride Systems by the Knudsen Effusion Method
Yanling Zhang, Etsuro Shibata, Eiki Kasai and Takashi Nakamura
- 1354-1359 :
-
Preparation of Mg--Li--Al--Zn Master Alloy in Air by Electrolytic Diffusing Method
Meng-Chang Lin and Jun-Yen Uan
- 1360-1367 :
-
Change in Ultrasonic Parameters and Dislocation Structures during Fatigue Process of Aluminum Alloy under High Stress Amplitude
Xiaohua Min, Hiroshi Kato, Fuxing Yin and Seiji Konuma
- 1368-1377 :
-
Production Conditions of Acicular Magnetic Metal Nanoparticles for Magnetic Recording
Kazuharu Iwasaki, Takuya Itoh and Tsutomu Yamamura
- 1378-1387 :
-
Modelling Columnar Dendritic Growth into an Undercooled Metallic Melt in the Presence of Convection
Jerzy Banaszek and David J. Browne
- 1388-1392 :
-
Synergistic Effects of Heavy Ion and Helium Irradiation on Microstructural and Dimensional Change in β-SiC
Sosuke Kondo, Tatsuya Hinoki and Akira Kohyama
- 1393-1401 :
-
Crystal Structures of La--Mg--Nix (x=3--4) System Hydrogen Storage Alloys
Hiroshi Hayakawa, Etsuo Akiba, Midori Gotoh and Tatsuoki Kohno
- 1402-1406 :
-
Magnetic Properties and Microstructure of High-Density Sintered Iron Formed by Warm Compaction Using Die Wall Lubrication
Shin Tajima, Takeshi Hattori, Mikio Kondoh, Hiroshi Okajima, Masaki Sugiyama and Tadayoshi Kikko
- 1407-1412 :
-
Effect of Mn or Co on Kinetics of Eutectoid Decomposition in Sintered α-Fe2Si5 Alloys
Junxiang Jiang, Kazuhiro Matsugi, Gen Sasaki and Osamu Yanagisawa
- 1413-1416 :
-
Characteristics of Sputtered Al-Sc and Al-Nd Alloy Thin Films for use in Liquid Crystal Display
Chia-Hua Chen and Hsin-Erh Huang
- 1417-1424 :
-
Erosion and Corrosion Behaviors of ADI Deposited TiN/TiAlN Coatings by Cathodic Arc Evaporation
Cheng-Hsun Hsu, Jung-Kai Lu, Kuei-Liang Lai and Ming-Li Chen
- 1425-1432 :
-
Martensitic Transformation of Ni2.18Mn0.82Ga Single Crystal Observed by Synchrotron Radiation White X-Ray Diffraction
Kazuko Inoue, Yasuo Yamaguchi, Kazumasa Ohsumi, Katsuhiro Kusaka and Takeshi Nakagawa
- 1433-1435 :
-
Growth Kinetic Model for Isothermal Omega Phase Particles in Low-Cost Beta Titanium Ti--6.8Mo--4.5Fe--1.5Al Alloy
Jean Debuigne and Frédéric Prima
- 1436-1439 :
-
Characteristics and Sintering Behavior of Oxide Coated Iron Nanopowder Synthesized by Plasma Arc Discharge Process
Ji-Hun Yu, Cheol-Su Youn, Byoung-Kee Kim, Jai-Sung Lee and Chul-Jin Choi
- 1440-1442 :
-
Characterization of the Gas Tungsten Arc Welded Cu54Ni6Zr22Ti18 Bulk Metallic Glass Weld
Jonghyun Kim, Seungyong Shin and Changhee Lee
[JIM HOME]
[JOURNAL ARCHIVES]
© 2003 The Japan Institute of Metals
Comments to us :
editjt@jim.or.jp