Materials Transactions Online

Materials Transactions, Vol.44 No.4 (2003)

426-435 :
Deformation Behavior and Controlling Mechanisms for Plastic Flow of Magnesium and Magnesium Alloy
Arthur Galiyev, Oleg Sitdikov and Rustam Kaibyshev
436-439 :
Tensile Properties of Directionally Solidified AZ91 Mg Alloy
Mamoru Mabuchi, Masaaki Kobata, Yasumasa Chino and Hajime Iwasaki
440-444 :
Production of High Strength Mg97Zn1Y2 Alloy by Using Mechanically Alloyed MgH2 Powder
Mitsuhiro Matsuda, Yoshihito Kawamura and Minoru Nishida
445-451 :
Grain-Boundary Sliding in AZ31 Magnesium Alloys at Room Temperature to 523 K
J. Koike, R. Ohyama, T. Kobayashi, M. Suzuki and K. Maruyama
452-457 :
Anisotropy and Non-Uniformity in Plastic Behavior of AZ31 Magnesium Alloy Plates
Eitaro Yukutake, Junichi Kaneko and Makoto Sugamata
458-462 :
Mechanical Properties and Microstructure of Mg-Al-Zn-Si-base Alloy
Yuan Guangyin, Liu Manping, Ding Wenjiang and Akihisa Inoue
463-467 :
Mechanical Properties of Mg-Y-Zn Alloy Processed by Equal-Channel-Angular Extrusion
Hiroyuki Watanabe, Toshiji Mukai, Shigeharu Kamado, Yo Kojima and Kenji Higashi
468-475 :
Effect of Microstructural Factors on Tensile Properties of an ECAE-Processed AZ31 Magnesium Alloy
Yu Yoshida, Lawrence Cisar, Shigeharu Kamado and Yo Kojima
476-483 :
Microstructures and Tensile Properties of ECAE-Processed and Forged AZ31 Magnesium Alloy
Lawrence Cisar, Yu Yoshida, Shigeharu Kamado, Yo Kojima and Fukashi Watanabe
484-489 :
Mechanical Properties and Blow Forming of Rolled AZ31 Mg Alloy Sheet
Hiroyuki Hosokawa, Yasumasa Chino, Koji Shimojima, Yasuo Yamada, Cui'e Wen, Mamoru Mabuchi and Hajime Iwasaki
490-495 :
Influence of Grain Size on Elongation at Elevated Temperatures in AZ31 Mg Alloy
Mamoru Mabuchi, Yasumasa Chino and Hajime Iwasaki
496-503 :
The Grain Size Dependence on Diffusion Bonding Behavior in Superplastic Mg Alloys
Hidetoshi Somekawa, Hiroyuki Watanabe and Kenji Higashi
504-510 :
High-purity Magnesium Coating on Magnesium Alloys by Vapor Deposition Technique for Improving Corrosion Resistance
Harushige Tsubakino, Atsushi Yamamoto, Shinji Fukumoto, Atsushi Watanabe, Kana Sugahara and Hiroyuki Inoue
511-517 :
Surface Treatment of Magnesium Alloys by Artificial Corrosion-oxidization Method
Atsushi Yamamoto and Harushige Tsubakino
518-523 :
Improvement of Corrosion Resistance and Adhesion of Coating Layer for Magnesium Alloy Coated with High Purity Magnesium
Shinji Fukumoto, Kana Sugahara, Atsushi Yamamoto and Harushige Tsubakino
524-530 :
Tribological Properties of Magnesium Composite Alloy with In-situ Synthesized Mg2Si Dispersoids
Katsuyoshi Kondoh, Hideki Oginuma and Tatsuhiko Aizawa
531-538 :
Improvement of Wear Resistance of Magnesium by Laser-Alloying with Silicon
Kyouji Murayama, Atsuya Suzuki, Shigeharu Kamado, Yo Kojima, Yoshiro Ito and Hitoshi Hiraga
539-545 :
Microstructure and Voltage-Current Characteristics of Anodic Films Formed on Magnesium in Electrolytes Containing Fluoride
Sachiko Ono, Hideo Kijima and Noboru Masuko
546-551 :
Electrorefining of Magnesium in Molten Salt and Its Application for Recycling
Toshihide Takenaka, Satoshi Isazawa, Masaya Mishina, Yuki Kamo and Masahiro Kawakami
552-557 :
Observation of Manganese-Bearing Particles in Molten AZ91 Magnesium Alloy by Rapid Solidification
Yosuke Tamura, Jiro Yagi, Tadashi Haitani, Tetsuichi Motegi, Norio Kono, Hiroshi Tamehiro and Hideo Saito
558-561 :
Semi-Solid Processing of Magnesium Alloys
Chang Dong Yim and Kwang Seon Shin
562-570 :
Development of New Die-castable Mg-Zn-Al-Ca-RE Alloys for High Temperature Applications
Ifeanyi A. Anyanwu, Yasuhiro Gokan, Shuuhei Nozawa, Atsuya Suzuki, Shigeharu Kamado, Yo Kojima, Suguru Takeda and Taketoshi Ishida
571-577 :
Quenched and Annealed Microstructures of Hot Worked Magnesium AZ31
Matthew Robert Barnett
578-582 :
Solid Recycling of an AZ31 Mg Alloy with a Vapor Deposition Coating Layer of High Purity Mg
Yasumasa Chino, Atsuyuki Yamamoto, Hajime Iwasaki, Mamoru Mabuchi and Harushige Tsubakino
583-588 :
The Electronic Structure of MgY2H6+δ High-Pressure Hydride
Hitoshi Takamura, Yasuyuki Goto, Atsunori Kamegawa and Masuo Okada
589-594 :
Improvement of Protium Absorption/Desorption Characteristics of Mg-x mass%LaNi5 (x=50, 70) Composites by Interface-control
Yohei Funayama, Atsushi Kato, Shintaro Yamagiwa, Hayato Okumura, Shigeharu Kamado and Yo Kojima
595-600 :
Fabrication of Porous Magnesium Alloys by Pulse Electric Current Sintering Process Using Machined Chips
Hayato Okumura, Kohji Watanabe, Shigeharu Kamado and Yo Kojima
601-610 :
Solid State Synthesis of Non-Equilibrium Phase in Mg-Co and Mg-Fe Systems via Bulk Mechanical Alloying
Tatsuhiko Aizawa, Ken-Ichi Hasehira and Chikashi Nishimura
611-618 :
Magnesium Matrix Composite with Solid-state Synthesized Mg2Si Dispersoids
Katsuyoshi Kondoh, Hideki Oginuma, Ritsuko Tuzuki and Tatsuhiko Aizawa
619-624 :
Precipitation in Mg-(4-13)%Li-(4-5)%Zn Ternary Alloys
Atsushi Yamamoto, Tetsuya Ashida, Yoshio Kouta, Kwang Bae Kim, Shinji Fukumoto and Harushige Tsubakino
625-628 :
Evaluation of Silicon Twinning in Hypo-Eutectic Al-Si Alloys
Kazuhiro Nogita, John Drennan and Arne Kristian Dahle
629-632 :
Development of Thermal Conductivity Prediction System for Composites
Yibin Xu, Junichi Kinugawa and Koichi Yagi
633-636 :
An Experimental Investigation of Effects of Specimen Size Parameters on Compressive and Tensile Properties in a Closed Cell Al Foam
Yasumasa Chino, Mamoru Mabuchi, Yasuo Yamada, Shigehiro Hagiwara and Hajime Iwasaki
637-640 :
The Extraction of Sm from Sm-Co alloys by the Glass Slag Method
Tetsuji Saito, Hironori Sato, Shunpei Ozawa and Tetsuichi Motegi
641-644 :
Hydrogen Isotope Effects on Absorption Properties of Ti-Cr-V Alloys
Takuya Tamura, Atsunori Kamegawa, Hitoshi Takamura and Masuo Okada
645-648 :
Greenness Assessment of Products in PLCA by DEA Approach
Yinsheng Yang, Guang-Hong Lu, Xueyi Guo and Ryoichi Yamamoto
649-652 :
Preparation and Characterization of Electrodeposited Fe-Pd Binary Alloy Film
Sayaka Doi, Feng Wang, Kaori Hosoiri and Tohru Watanabe
653-656 :
Preparation and Characterization of Electrodeposited Co-Pt Binary Alloy Film
Kaori Hosoiri, Feng Wang, Sayaka Doi and Tohru Watanabe
657-660 :
Microstructures and Mechanical Properties of Porosity-Graded Pure Titanium Compacts
Ik-Hyun Oh, Haruhiko Segawa, Naoyuki Nomura and Shuji Hanada
661-664 :
Magnetocrystalline Anisotropy in a Single Crystal Fe-Ni-Ga Ferromagnetic Shape Memory Alloy
Haruhiko Morito, Asaya Fujita, Kazuaki Fukamichi, Takuya Ota, Ryosuke Kainuma, Kiyohito Ishida and Katunari Oikawa
665-668 :
Large Magnetostriction of Fe-29.6 at%Pd Alloy Ribbon under Tensile Stress
Teiko Okazaki, Hideyuki Nakajima and Yasubumi Furuya
669-672 :
Magnetic Domain of Fe73.5Cu1Nb3Si13.5B9 Studied by Electron Holography Coupled with Thickness Mapping Method
Yoshitaka Aoyama, Young-Gil Park, Daisuke Shindo and Yoshihito Yoshizawa
673-676 :
Evaluation Technique of the Hardness and Elastic Modulus of Materials with Fine Microstructures
Jin-Hak Kim, Tatsuo Tabaru and Hisatoshi Hirai
677-680 :
Crystal Structure of Fe-N Clusters Prepared by Plasma-Gas-Condensation
Dong-Liang Peng, Takehiko Hihara and Kenji Sumiyama
681-684 :
Fracture Toughness Evaluated by Indentation Methods and Its Relation to Surface Energy in Silicon Single Crystals
Masaki Tanaka, Kenji Higashida, Hideharu Nakashima, Hidenari Takagi and Masami Fujiwara
685-687 :
Partial Sulfurization of Laser-ablated Titanium Oxide Film for the Improvement in Photocatalytic Property
Takahiro Nakamura, Mitsugu Arata, Hideyuki Takahashi, Katsutoshi Yamamoto, Nobuaki Sato, Atsushi Muramatsu and Eiichiro Matsubara
688-691 :
Temperature Dependence of Inward Diffusion of Underpotentially-Deposited Cd into a Au (100) Bulk Phase under Electrochemical Environment
Tomofumi Tanaka, Kimihiko Kubo, Nobumitsu Hirai and Shigeta Hara
692-695 :
Effects of Boron-strontium Interactions on Eutectic Modification in Al-10 mass%Si Alloys
Kazuhiro Nogita, Stuart David McDonald and Arne Kristian Dahle
696-699 :
Hydrogen Absorption of Oxide Composite Materials Prepared from Melt-Spun Zr-Pd-Ni Alloys
Shin-ichi Yamaura, Hisamichi Kimura and Akihisa Inoue
700-704 :
An Analysis of Crystallization Process in Amorphous Alloys Using Time-Scaling Factor
Yoshihiro Takahara and Nobutaka Narita
705-708 :
Effect of Sodium Hypophosphite on the Structure and Properties of Electrodeposited Ni-W-P Alloys
Jamil Ahmad, Katsuhiko Asami, Akira Takeuchi and Akihisa Inoue
709-712 :
Study of the Crystallization Kinetics of Zr60Al15Ni25 Bulk Glassy alloy by Differential Scanning Calorimetry
Zhijie Yan, Jinfu Li, Shunrong He, Honghua Wang and Yaohe Zhou
713-721 :
Influence of Frequency on High-Temperature Fatigue Behavior of 17-4 PH Stainless Steels
Jui-Hung Wu and Chih-Kuang Lin
722-726 :
Carbothermic Reduction of MgO by Microwave Irradiation
Takeshi Yoshikawa and Kazuki Morita
727-730 :
In-situ Electrochemical Atomic Force Microscopy with Atomic Resolution of Ni(110) in Neutral and Alkaline Aqueous Solution
Nobumitsu Hirai, Hiromi Okada and Shigeta Hara
731-735 :
Coatings of Nb-based Alloy by Cr and/or Al Pack Cementations and Its Oxidation Behavior in Air at 1273-1473 K
Michihisa Fukumoto, Yuzi Matsumura, Shigenari Hayashi, Toshio Narita, Kazusi Sakamoto, Akio Kasama and Ryouhei Tanaka
736-742 :
High Temperature Oxidation of Y2O3 Partially-Stabilized ZrO2 Composites Dispersed with Ni Particles
Makoto Nanko, Makoto Yoshimura and Toshio Maruyama
743-748 :
Microstructure of Plasma-Sprayed Cast Iron Splats with Different Particle Sizes
Magdi F. Morks, Yoshiki Tsunekawa, Masahiro Okumiya and Madiha A. Shoeib
749-753 :
Corrosion Behavior of Cu-Zr-Ti-Nb Bulk Glassy Alloys
Chunling Qin, Katsuhiko Asami, Tao Zhang, Wei Zhang and Akihisa Inoue
754-758 :
Superplasticity-like Behavior of Rapidly Solidified Ti-rich TiAl Powders and its Application to In-situ Sintering Bonding
Yasuhiro Morizono, Ryohei Kumagae, Minoru Nishida, Yoshiyuki Mizuta and Akira Chiba
759-765 :
The Characterization of HIP and RHIP Consolidated NiAl Intermetallic compounds Containing Chromium Particles
Shintaro Ishiyama, Hans Peter Buchkremer and Dovert Stöver
766-774 :
Grain Refinement in As-Cast 7475 Aluminum Alloy under Hot Equal-Channel Angular Pressing
Alexandre Goloborodko, Oleg Sitdikov, Taku Sakai, Rustam Kaibyshev and Hiromi Miura
775-781 :
Materials Processing for Structural Stability in a ZK60 Magnesium Alloy
Hiroyuki Watanabe, Koji Moriwaki, Toshiji Mukai, Tetsu Ohsuna, Kenji Hiraga and Kenji Higashi
782-786 :
Characterization of the Silica Conversion Film Formed on Zinc-Electroplated Steel
Seong-Jong Kim, Motoaki Hara, Ryoichi Ichino, Masazumi Okido and Nobuaki Wada
787-793 :
Effect of Aluminum Content on Tribological Behavior of a Cu-Fe-C Based Friction Material Sliding against FC30 Cast Iron
Sun-Zen Chen, Jiin-Huey Chern Lin and Chien-Ping Ju
794-797 :
Compressive Deformation of Precursor-Derived Si-C-N Ceramics at Elevated Temperatures
Satoru Ishihara, Joachim Bill, Fritz Aldinger and Fumihiro Wakai
798-801 :
Direct Extraction and Recovery of Neodymium Metal from Magnet Scrap
Toru H. Okabe, Osamu Takeda, Kazuhiro Fukuda and Yoshiaki Umetsu
802-804 :
Preparation of BaTi2O5 Single Crystal by a Floating Zone Method
Takaya Akashi, Hiroaki Iwata and Takashi Goto

[JIM HOME] [JOURNAL ARCHIVES]

© 2003 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp