Materials Transactions Online

Materials Transactions, Vol.43 No.10 (2002)

2364-2369 :
Low-Temperature Superplasticity in Aluminum Alloys Processed by Equal-Channel Angular Pressing
Satoshi Ota, Hiroki Akamatsu, Koji Neishi, Minoru Furukawa, Zenji Horita and Terence G. Langdon
2370-2377 :
High Strain Rate Superplasticity in an Al-Li-Mg Alloy Subjected to Equal-Channel Angular Extrusion
Fanil Musin, Rustam Kaibyshev, Yoshinobu Motohashi, Takaaki Sakuma and Goroh Itoh
2378-2384 :
Deformation and Fracture at High Temperatures in an Al-Mg-Mn Alloy Sheet Consisting of Coarse- and Fine-Grained Layers
Yoshimasa Takayama, Takanori Itoh, Hajime Kato and Hideo Watanabe
2385-2391 :
Effects of Flow Stress and Grain Size on the Evolution of Grain Boundary Microstructure in Superplastic 5083 Aluminum Alloy
Tomotake Hirata, Toshihiro Osa, Hiroyuki Hosokawa and Kenji Higashi
2392-2399 :
Effect of Cu and Zr Additions on the Superplastic Behavior of 6061 Aluminum Alloy
Rustam Kaibyshev, Fanil Musin, Dmitry Gromov, T. G. Nieh and Donald R. Lesuer
2400-2407 :
Continuous Dynamic Recrystallization in a Superplastic 7075 Aluminum Alloy
Xuyue Yang, Hiromi Miura and Taku Sakai
2408-2414 :
The Role of Grain Boundary Sliding in Microstructural Evolution during Superplastic Deformation of a 7055 Aluminum Alloy
Rustam Kaibyshev, Alexandre Goloborodko, Fanil Musin, Ilya Nikulin and Taku Sakai
2415-2418 :
The Critical Stress at the Interface for Cavity Nucleation in Superplastic Aluminum Matrix Composites Reinforced with Si3N4 Particles
Hiroyuki Hosokawa, Mamoru Mabuchi, Hajime Iwasaki and Kenji Higashi
2419-2423 :
Low Temperature Superplasticity of ECAE Processed Mg-10%Li-1%Zn Alloy
Yu Yoshida, Lawrence Cisar, Shigeharu Kamado and Yo Kojima
2424-2432 :
High Strain Rate and/or Low Temperature Superplasticity in AZ31 Mg Alloys Processed by Simple High-Ratio Extrusion Methods
H. K. Lin and J. C. Huang
2433-2436 :
Superplastic Behavior and Microstructural Evolution in a Commercial Mg-3Al-1Zn Magnesium Alloy
Manping Liu, Guangyin Yuan, Qudong Wang, Yinhong Wei, Wenjiang Ding and Yanping Zhu
2437-2442 :
Superplasticity and Cavitation of Recycled AZ31 Magnesium Alloy Fabricated by Solid Recycling Process
Yasumasa Chino, Ryuji Kishihara, Koji Shimojima, Hiroyuki Hosokawa, Yasuo Yamada, Cui'e Wen, Hajime Iwasaki and Mamoru Mabuchi
2443-2448 :
Superplastic Forming of AZ31 Magnesium Alloy Sheet into a Rectangular Pan
Abdel-Wahab El-Morsy, Ken-ichi Manabe and Hisashi Nishimura
2449-2454 :
Room Temperature Deformation Behavior of Zn-22 mass%Al Alloy with Nanocrystalline Structure
Tsutomu Tanaka, Koichi Makii, Atsumichi Kushibe and Kenji Higashi
2455-2462 :
Grain Boundary Character and Superplasticity of Fine-Grained Ultra-High Carbon Steel
Tadashi Furuhara, Eiichi Sato, Taichiro Mizoguchi, Shuji Furimoto and Tadashi Maki
2463-2467 :
Deformation Behavior of Pt-based Metallic Glass at Elevated Temperatures
Makoto Takagi, Toru Imura, Yoshihito Kawamura and Akihisa Inoue
2468-2472 :
Local Bonding States of Titanium and Germanium-doped Tetragonal Zirconia Polycrystal and Their Correlation to High Temperature Ductility
Akihide Kuwabara, Syu Yokota, Yuichi Ikuhara and Taketo Sakuma
2473-2479 :
Thermal Conductivity of Superplastically Deformed 3Y-TZP
Chujie Wan, Yoshinobu Motohashi, Taiju Shibata, Shinichi Baba, Masahiro Ishihara and Taiji Hoshiya
2480-2486 :
Characterization of Cavities in Superplastically Deformed Tetragonal Zirconia Polycrystals by Means of Small Angle Neutron Scattering
Stefanus Harjo, Naoki Kojima, Yoshinobu Motohashi, Jan Saroun, Vasyl Ryukthin, Pavel Strunz, Rudolf Loidl and Mathias Baron
2487-2493 :
Microstructures and Mechanical Properties of Al3Fe Reinforced Aluminum Matrix Composites Fabricated by a Plasma Synthesis Method
Jung-Moo Lee, Suk-Bong Kang, Tatsuo Sato, Hiroyasu Tezuka and Akihiko Kamio
2494-2501 :
Bio-Functionalization of Titanium Surfaces for Dental Implants
Masao Yoshinari, Kenichi Matsuzaka, Takashi Inoue, Yutaka Oda and Masaki Shimono
2502-2508 :
Prediction of Glass-Forming Composition Ranges in Zr-Ni-Al Alloys
Takuji Shindo, Yoshio Waseda and Akihisa Inoue
2509-2515 :
Electron Beam Welding of Zr50Cu30Ni10Al10 Bulk Glassy Alloys
Yoshihiko Yokoyama, Nobuyuki Abe, Kenzo Fukaura, Takeshi Shinohara and Akihisa Inoue
2516-2522 :
Technology for Recycling Magnesium Alloy Housings of Notebook Computers
Koichi Kimura, Kouta Nishii and Motonobu Kawarada
2523-2526 :
Surface Segregation of Chromium in a Copper-Chromium Alloy and its Effect on Formation of a Native Oxide Layer
Shigeru Suzuki, Yukio Ishikawa, Minoru Isshiki and Yoshio Waseda
2527-2530 :
High Temperature Oxidation of Ti-(45, 47)%Al-2%Mn-2%Nb-0.8 vol%TiB2 Alloys
Dong-Bok Lee, Woung-Shik Shim and Dong-Yi Seo
2531-2535 :
High Temperature Oxidation of Ti-47%Al-1%Mn Alloy
Dong-Bok Lee, Yu-Dong Jang and Morihiko Nakamura
2536-2542 :
Formation and Annealing Behavior of Nanocrystalline Steels Produced by Ball Drop Test
Minoru Umemoto, Xinjiang Hao, Tomohiro Yasuda and Koichi Tsuchiya
2543-2547 :
Effects of Hydrogen on the Mechanical Properties of Ti50Ni25Cu25 Metallic Glass
Shin-ichi Yamaura, Masashi Hasegawa, Hisamichi Kimura and Akihisa Inoue
2548-2553 :
Effect of Cell Size on the Dynamic Compressive Properties of Open-Celled Aluminum Foams
Hidetaka Kanahashi, Toshiji Mukai, T. G. Nieh, Tatsuhiko Aizawa and Kenji Higashi
2554-2560 :
Mechanical Properties and Press Formability at Room Temperature of AZ31 Mg Alloy Processed by Single Roller Drive Rolling
Yasumasa Chino, Mamoru Mabuchi, Ryuji Kishihara, Hiroyuki Hosokawa, Yasuo Yamada, Cui'e Wen, Koji Shimojima and Hajime Iwasaki
2561-2567 :
Corrosion Resistance of Alumina-Chromia Ceramic Materials Against Molten Slag
Takehiko Hirata, Tatsuo Morimoto, Akio Deguchi and Nozomu Uchida
2568-2573 :
Hi-NicalonTM Fiber-Reinforced CVI-SiC Matrix Composites: I Effects of PyC and PyC-SiC Multilayers on the Fracture Behaviors and Flexural Properties
Wen Yang, Hiroshi Araki, Tetsuji Noda, Ji Yeon Park, Yutai Katoh, Tatsuya Hinoki, Jinnan Yu and Akira Kohyama
2574-2577 :
Hi-NicalonTM Fiber-Reinforced CVI-SiC Matrix Composites: II Interfacial Shear Strength and Its Effects on the Flexural Properties
Wen Yang, Hiroshi Araki, Akira Kohyama, Yutai Katoh, Quanli Hu, Hiroshi Suzuki and Tetsuji Noda
2578-2581 :
Formation and Thermal Stability of Ca-Mg-Ag-Cu Bulk Glassy Alloys
Kenji Amiya and Akihisa Inoue
2582-2588 :
Formation of Pores during Unidirectional Solidification of Water Containing Carbon Dioxide
Kenji Murakami and Hideo Nakajima
2589-2592 :
Synthesis of TiAl(Cr)/Ti2AlC Composites by Reactive Arc-Melting
Atsushi Kakitsuji, Janakarajan Ramkumar, Jun Kinose, Hiroshi Mabuchi, Hiroshi Tsuda and Kenji Morii
2593-2599 :
Phase Transformations in Al87Ni7Ce6 and Al87Ni7Nd6 Amorphous Alloys
Livio Battezzati, Simone Pozzovivo and Paola Rizzi
2600-2603 :
Interface Stability in Diffusion Couple of L10 type TiAl and L12 type (Al, Mn)3Ti Alloys at 1273-1473 K
Guangxi Jin, Takashi Kimura, Kewei Gao, Kenki Hashimoto and Lijie Qiao
2604-2608 :
Laser Brazing of Diamond Grits Using a Cu-15Ti-10Sn Brazing Alloy
Sheng-Fang Huang, Hsien-Lung Tsai and Shun-Tian Lin
2609-2616 :
Structure of Thermoelectric Material CoSb3 Formed by Reactive Diffusion
Toshitada Shimozaki, Keun-soo Kim, Toshihiko Iwata, Takahisa Okino and Chan-Gyu Lee
2617-2621 :
On The Characterization of Plastic Flow in Zr-based Metallic Glass Through Micro-indentation: an Atomic Force Microscopy Analysis
Tarek Benameur, Khalil Hajlaoui, Alain Reza Yavari, Akihisa Inoue and Brahim Rezgui
2622-2628 :
The role of Silicon on Microstructure and High Temperature Performance of Aluminide Coating on Superalloy In-738LC
Kourosh Shirvani, Mohsen Saremi, Atsushi Nishikata and Tooru Tsuru
2629-2634 :
Microstructure Control of Particle Reinforced Metal Matrix Composites Fabricated by Low-Pressure Infiltration Process
Masayuki Mizumoto, Toshihisa Murano and Akio Kagawa
2635-2642 :
Effects of Mn Contents on the Microstructure and Mechanical Properties of the Fe-10Al-xMn-1.0C Alloy
Chih-Yeh Chao and Ching-Hua Liu
2643-2646 :
Tensile Properties from Room Temperature to 673 K of Mg-0.9 mass%Ca Alloy Containing Lamella Mg2Ca
Yasumasa Chino, Masaaki Kobata, Hajime Iwasaki and Mamoru Mabuchi
2647-2650 :
Microstructure Feature of Bulk Glassy Cu60Zr30Ti10 Alloy in As-cast and Annealed States
Yantang Chen, Tao Zhang, Wei Zhang, Dehai Ping, K. Hono, Akihisa Inoue and Toshio Sakurai

[JIM HOME] [JOURNAL ARCHIVES]

© 2002 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp