Materials Transactions Online

Materials Transactions, Vol.43 No.8 (2002)

1784-1790 :
Role of Electrode Potential Difference between Lead-Free Solder and Copper Base Metal in Wetting
Tadashi Takemoto and Tatsuya Funaki
1791-1796 :
Shear Strength and Interfacial Compound of Sn-Ag-Bi-In Alloy
Moon-Il Kim, Joon-Kwon Moon and Jae-Pil Jung
1797-1801 :
Interface Reaction and Mechanical Properties of Lead-free Sn-Zn Alloy/Cu Joints
Ikuo Shohji, Takao Nakamura, Fuminari Mori and Shinichi Fujiuchi
1802-1807 :
Mechanical Strength and Microstructure of BGA Joints Using Lead-Free Solders
Masataka Nishiura, Akihiro Nakayama, Sigeaki Sakatani, Yasuhiro Kohara, Keisuke Uenishi and Kojiro F. Kobayashi
1808-1815 :
Mechanical Properties and Microstructure of Tin-Silver-Bismuth Lead-Free Solder
Hanae Shimokawa, Tasao Soga and Koji Serizawa
1816-1820 :
Numerical Simulation of Dynamic Wetting Behavior in the Wetting Balance Method
Jeong Whan Han, Hwang Gu Lee and Jae Yong Park
1821-1826 :
Interfacial Reactions Between Sn-58 mass%Bi Eutectic Solder and (Cu, Electroless Ni-P/Cu) Substrate
Jeong-Won Yoon, Chang-Bae Lee and Seung-Boo Jung
1827-1832 :
Effects of Alloying in Near-Eutectic Tin-Silver-Copper Solder Joints
Iver E. Anderson, Bruce A. Cook, Joel Harringa, Robert L. Terpstra, James C. Foley and Ozer Unal
1833-1839 :
Melting and Joining Behavior of Sn/Ag and Sn-Ag/Sn-Bi Plating on Cu Core Ball
Keisuke Uenishi, Yasuhiro Kohara, Shigeaki Sakatani, Toshio Saeki, Kojiro F. Kobayashi and Masaharu Yamamoto
1840-1846 :
Influence of Phosphorus Concentration in Electroless Plated Ni-P Alloy Film on Interfacial Structures and Strength between Sn-Ag-(-Cu) Solder and Plated Ni-P Alloy Film
Yasunori Chonan, Takao Komiyama, Jin Onuki, Ryoichi Urao, Takashi Kimura and Takahiro Nagano
1847-1853 :
Anomalous Creep in Sn-Rich Solder Joints
Ho Geon Song, John W. Morris, Jr. and Fay Hua
1854-1857 :
Tensile Properties of Sn-3.5Ag and Sn-3.5Ag-0.75Cu Lead-free Solders
Ikuo Shohji, Tomohiro Yoshida, Takehiko Takahashi and Susumu Hioki
1858-1863 :
Effect of Isothermal Aging on Ball Shear Strength in BGA Joints with Sn-3.5Ag-0.75Cu Solder
Chang-Bae Lee, Seung-Boo Jung, Young-Eui Shin and Chang-Chae Shur
1864-1867 :
Mechanical Properties and Shear Strength of Sn-3.5Ag-Bi Solder Alloys
Jin-Won Choi, Ho-Seob Cha and Tae-Sung Oh
1868-1872 :
Thermodynamic Properties of Liquid Al-Sn-Zn Alloys: A Possible New Lead-Free Solder Material
Sabine Knott and Adolf Mikula
1873-1878 :
Thermodynamics-Aided Alloy Design and Evaluation of Pb-free Solders for High-Temperature Applications
Jong Hoon Kim, Sang Won Jeong and Hyuck Mo Lee
1879-1886 :
Thermodynamic Calculation of Phase Diagram in the Bi-In-Sb Ternary System
Yuwen Cui, Satoru Ishihara, Xing Jun Liu, Ikuo Ohnuma, Ryosuke Kainuma, Hiroshi Ohtani and Kiyohito Ishida
1887-1890 :
Influence of P Content in Electroless Plated Ni-P Alloy Film on Interfacial Structures and Strength between Sn-Zn Solder and Plated Au/Ni-P Alloy Film
Yasunori Chonan, Takao Komiyama, Jin Onuki, Ryoichi Urao, Takashi Kimura and Takahiro Nagano
1892-1906 :
Recent Progress in Bulk Glassy Alloys
Akihisa Inoue and Akira Takeuchi
1907-1912 :
Kinetics and Thermodynamics of Bulk Glass Formation in a Zr52.5Cu17.9Ni14.6Al10Ti5 Alloy
Maciej Motyka, Enrica Gilardi, Guido Heunen and Marcello Baricco
1913-1917 :
Direct Comparison between Critical Cooling Rate and Some Quantitative Parameters for Evaluation of Glass-Forming Ability in Pd-Cu-Ni-P Alloys
Nobuyuki Nishiyama and Akihisa Inoue
1918-1920 :
Determination of Atomic Sites of Nb Dissolved in Metastable Fe23B6 Phase
Takahiro Nakamura, Hisato Koshiba, Muneyuki Imafuku, Akihisa Inoue and Eiichiro Matsubara
1921-1930 :
Relation Between Time and Temperature Dependence of Diffusion and the Structural State in ZrTiCuNiBe Bulk Glasses
Thomas Zumkley, Volkmar Naundorf, Michael-Peter Macht, Peter Fielitz and Günter Frohberg
1931-1936 :
Electrical Resistivity and Mössbauer Studies for the Structural Relaxation Process in Pd-Cu-Ni-P Glasses
Osami Haruyama, Hisamichi M. Kimura, Nobuyuki Nishiyama, Akihisa Inoue and Juichiro Arai
1937-1946 :
Stability of Supercooled Liquid and Transformation Behavior in Zr-Based Glassy Alloys
Junji Saida, Mitsuhide Matsushita and Akihisa Inoue
1947-1951 :
Structure of Zr52Ti5Cu18Ni15Al10 Bulk Metallic Glass at Elevated Temperatures
Norbert Mattern, Uta Kühn, Jan Sakowski, Jörg Neuefeind and Jürgen Eckert
1952-1956 :
Thermal Stability and Mechanical Strength of Bulk Glassy Ni-Nb-Ti-Zr Alloys
Akihisa Inoue, Wei Zhang and Tao Zhang
1957-1960 :
Anelastic Behavior under Tensile and Shearing Stresses in Bulk Metallic Glasses
Kazutaka Fujita, Akihisa Inoue, Tao Zhang and Nobuyuki Nishiyama
1961-1965 :
Preparation of Fe65Co10Ga5P12C4B4 Bulk Glassy Alloy with Good Soft Magnetic Properties by Spark-Plasma Sintering of Glassy Powder
Baolong Shen, Hisamichi Kimura, Akihisa Inoue, Mamoru Omori and Akira Okubo
1966-1973 :
Magnetic Properties and Phase Transformations of Bulk Amorphous Fe-Based Alloys Obtained by Different Techniques
Mihai Stoica, Jarmila Degmová, Stefan Roth, Jürgen Eckert, Helgard Grahl, Ludwig Schultz, Alain Reza Yavari, Åke Kvick and Guido Heunen
1974-1978 :
Thermal Stability and Soft Magnetic Properties of (Fe, Co)-(Nd, Dy)-B Glassy Alloys with High Boron Concentrations
Wei Zhang, Yi Long, Muneyuki Imafuku and Akihisa Inoue
1979-1984 :
High Strength Magnesium-based Glass Matrix Composites
Birgit Bartusch, Frank Schurack and Jürgen Eckert
1985-1991 :
Bulk Amorphous and Partially Crystallized Alloys in Nd-Fe-(Al, B) System with Hard Magnetic Properties Prepared by Arc Melting
Akira Takeuchi and Akihisa Inoue
1992-1999 :
Coercivity and Phase Transitions of Clustered Nd90-xFexAl10 Bulk Hard Magnets
Horia Chiriac and Nicoleta Lupu
2000-2005 :
Soft Magnetic Nanocrystalline Alloys for High Temperature Applications
Matthew A. Willard, Frank Johnson, John H. Claassen, Rhonda M. Stroud, Michael E. McHenry and Vincent G. Harris
2006-2016 :
Developments of Aluminum- and Magnesium-Based Nanophase High-Strength Alloys by Use of Melt Quenching-Induced Metastable Phase
Akihisa Inoue, Hisamichi Kimura and Kenji Amiya
2017-2025 :
Structural Characterisation and Mechanical Properties of Nanocomposite Al-based Alloys
Fernando Audebert, Frederic Prima, Marina Galano, Marilena Tomut, Paul J. Warren, Ian C. Stone and Brian Cantor
2026-2030 :
Strengthening Mechanisms in Al-Based and Zr-Based Amorphous Nanocomposites
Hyoung Seop Kim, Sun Ig Hong, Hidemi Kato and Akihisa Inoue
2031-2038 :
Composed Phases and Microhardness of Aluminium-Rich Aluminium-Iron Alloys Obtained by Rapid Quenching, Mechanical Alloying and High Pressure Torsion Deformation
Sergei D. Kaloshkin, Victor V. Tcherdyntsev, Igor A. Tomilin, Dmitrii V. Gunderov, Vladimir V. Stolyarov, Yurii V. Baldokhin, Irina G. Brodova and Evgenii V. Shelekhov
2039-2043 :
Amorphous Phase and Compact Solid Formation of Ti-(37.5-X) at%Si-X at%Fe (X=0-10) Powders by Mechanical Alloying and Pulse Current Sintering
Akihiro Matsumoto, Keizo Kobayashi, Toshiyuki Nishio and Kimihiro Ozaki
2044-2045 :
A Study of Local Nanocrystalline Structure of 0Cr16Ni22Mo2Ti Steel in Bond Area of Flash Welding
Zhang Fucheng, Zhang Ming and Li Jianhui
2046-2049 :
Thermo-Kinetic Anomalies across Rigidity Threshold in GexSe1-x
Anand M. Awasthi and Sujatha Sampath
2050-2057 :
THE FORTY-SEVENTH GOLD MEDALIST OF THE JAPAN INSTITUTE OF METALS, 2002
Martensitic Transformations: Microstructures and Uniaxial Stress, Magnetic Field and Hydrostatic Pressure Effects

Ken'ichi Shimizu
2058-2062 :
Annealing Effect on the Optical Properties of a-SiC:H Films Deposited by PECVD
Yong-Tak Kim, Sung-Min Cho, Byoungyou Hong, Su-Jeong Suh, Gun-Eik Jang and Dae-Ho Yoon
2063-2068 :
Tensile Properties at Room Temperature to 823 K of Mg-4Y-3RE Alloy
Mamoru Mabuchi, Yasumasa Chino and Hajime Iwasaki
2069-2072 :
Solvent Extraction Separation of Co, Mn and Zn from Ni-rich Leaching Solution by Na-PC88A
Jong-Gwan Ahn, Kyoung-Ho Park and Jeong-Soo Sohn
2073-2079 :
Solar Light Absorption Property of Nano-Structured Silver Layer and Application to Photo-Thermal Energy Conversion Coating
Masato Nishimura and Takashi Ishiguro
2080-2086 :
Semi-Continuous Production of Tantalum Powder by Electronically Mediated Reaction (EMR)
Il Park, Toru H. Okabe, Oh Yeon Lee, Chuel Ro Lee and Yoshio Waseda
2087-2091 :
Strengthening of Carbon Fibers by Imposition of a High Magnetic Field in a Carbonization Process
Mun Gyu Sung, Kensuke Sassa, Hiroyasu Ogawa, Yoshifumi Tanimoto and Shigeo Asai
2092-2096 :
Electron Energy-Loss Spectroscopy of Carbon Films Prepared by Electron-Cyclotron-Resonance Plasma Sputtering
Yoshie Murooka, Nobuo Tanaka, Shigeru Hirono and Michio Hibino
2097-2103 :
Whisker-Like Goethite Nanoparticles Containing Cobalt Synthesized in a Wet Process
Kazuharu Iwasaki and Tsutomu Yamamura
2104-2109 :
First-Principles Investigation of L10-Disorder Phase Equilibrium in Fe-Pt System
Tetsuo Mohri and Ying Chen
2110-2114 :
Semi-Solid Consolidation Processing of Rapidly Solidified Powders for Fabrication of High Strength AZ91 Magnesium Alloys
Toshiyuki Nishio, Keizo Kobayashi, Akihiro Matsumoto and Kimihiro Ozaki
2115-2119 :
The K Value Distribution of Liquid Phase Sintered Microstructures
Po-Liang Liu and Shun-Tian Lin
2120-2124 :
Solubilities and Equilibrium Distribution Coefficients of Oxygen and Carbon in Silicon
Takayuki Narushima, Atsushi Yamashita, Chiaki Ouchi and Yasutaka Iguchi
2125-2129 :
111Cd Time Differential Perturbed Angular Correlation Study of Deformed Ni
Koji Baba, Saburo Nasu, Takashi Ohtomo, Shotaro Morimoto and Tadashi Saito
2130-2136 :
Influence of Shear Height on Shear Strength of Tin-Lead Solder Ball Bonding
Takashi Nakamori, Mayumi Ikeda, Kunihiro Noguchi, Isao Shimizu and Yasuhide Ohno
2137-2142 :
Effects of Chromium on the Glass Formation and Corrosion Behavior of Bulk Glassy Fe-Cr-Mo-C-B Alloys
Shujie Pang, Tao Zhang, Katsuhiko Asami and Akihisa Inoue
2143-2147 :
Surfactant Effect of Oxygen Atoms on Epitaxial Growth of fcc Ultra Thin Films on Cu(001)
Masaki Onishi, Lin Li, Shingo Torii, Ayumu Kida, Masaaki Doi and Masaaki Matsui
2148-2156 :
Optimizing Drilling Conditions for AZ61A Magnesium Alloy
Kwo Zong Chong and Teng Shih Shih
2157-2160 :
High-Strength and High-Speed Bonding Technology using Thick Al-Ni Wire
Jin Onuki, Takao Komiyama, Yasunori Chonan and Masahiro Koizumi
2161-2164 :
Hydrogenation of Body-Centered-Cubic Titanium-Chromium Alloys Prepared by Mechanical Grinding
Nobuhiko Takeichi, Hiroyuki T. Takeshita, Toshio Oishi, Tadashi Kaneko, Hideaki Tanaka, Tetsu Kiyobayashi and Nobuhiro Kuriyama
2165-2168 :
Hydrogen Pressure-Composition Isotherms for Ti45Zr38Ni17 Amorphous and Quasicrystal Powders Produced by Mechanical Alloying
Akito Takasaki, Van T. Huett and Kenneth F. Kelton

[JIM HOME] [JOURNAL ARCHIVES]

© 2002 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp