Materials Transactions Online

Materials Transactions, Vol.43 No.3 (2002)

282-284 :
Material Recycling in OECD Countries
Timothy G. Gutowski
285-291 :
Barrier-Free Processing of Materials for Environmentally Benign Life-Cycle Design
Mamoru Mabuchi, Kohmei Halada and Tatsuhiko Aizawa
292-300 :
Suppression of Surface Hot Shortness due to Cu in Recycled Steels
Koji Shibata, Soek-Jong Seo, Masashi Kaga, Hiroshi Uchino, Akio Sasanuma, Kentaro Asakura and Chihiro Nagasaki
301-304 :
Deformation and Fracture Mechanism of Consolidated Fe-Cu Alloy from Rapidly Solidified Powder
Hideki Kakisawa, Kazumi Minagawa, Minoru Otaguchi and Kohmei Halada
305-310 :
Microstructure of Cast Strip in 0.1 mass%C Steels Containing Phosphorus
Koichi Hirata, Osamu Umezawa and Kotobu Nagai
311-314 :
Aluminum-Alloyed Cast Iron as a Versatile Alloy
Susumu Takamori, Yoshiaki Osawa and Kohmei Halada
315-321 :
Solid State Recycling of Recyclable Aluminum Wastes with In-Process Microstructure Control
Tatsuhiko Aizawa, Tachai Luangvaranunt and Katsuyoshi Kondoh
322-325 :
Solid-State Recycle Processing for Magnesium Alloy Waste via Direct Hot Forging
Katsuyoshi Kondoh, Tachai Luangvaranunt and Tatsuhiko Aizawa
326-331 :
New Heat-Resistant and Soluble Aramids Synthesized by Palladium-Catalyzed Carbonylation-Polycondensation
Yoshihiro Kubota, Shigekuni Nakada and Yoshihiro Sugi
332-339 :
Present State of Wood Waste Recycling and a New Process for Converting Wood Waste into Reusable Wood Materials
Yasushi Hiramatsu, Yuko Tsunetsugu, Masahiko Karube, Mario Tonosaki and Tsuyoshi Fujii
340-342 :
Corrosion Resistance and Adhesion Properties of the Chromium-Free Coating Using an Urethane-Base Resin for AZ91E Magnesium Alloy
Yasumasa Chino, Yoshiaki Mori, Koji Ippongi and Mamoru Mabuchi
343-347 :
Superhigh Strength Metal Injection Molded Low Alloy Steels by In-Process Microstructural Control
Hideshi Miura and Mitsuhiro Matsuda
348-351 :
Environmentally Benign Manufacturing of Automotive Parts via Powder Metallurgy
Akira Fujiki, Hisayoshi Kojima and Tatsuhiko Aizawa
352-354 :
Preparation of MoSi2-X(X=B, Al, Nb) Alloys by Mechanical Alloying and Pulse Discharge Sintering Process
Yong-Ho Park, Aidang Shan and Hitoshi Hashimoto
355-358 :
In Situ High-Temperature X-ray Observations of Crystallization of Zinctellurite Glass
Akihiko Nukui, Shin-ichi Todoroki, Masaaki Miyata and Yoshio Bando
359-363 :
Environmentally Benign Manufacturing and Ecomaterials; Product Induced Material Flows
Timothy G. Gutowski
364-367 :
Material Flow Challenges in Industrial Ecosystems
Bert Bras
368-375 :
Integrated Environment-Conscious Life-Cycle Design (Eco-Life-Cycle Design) of Building Structural Composite Materials, Components, and/or Systems -as a Basis of Establishment of Sustainable Eco-buildings and Eco-cities-
Toshio Fukushima
376-378 :
High Performance Materials for Long-Term Usage
T. S. Piwonka
379-385 :
Exergy Analysis of Steel Production Processes
Nobuyuki Shigaki, Tomohiro Akiyama and Fumitaka Tsukihashi
385-389 :
Graded Design of Carrier Concentration in Thermoelectric PbTe System by Heat-treatment
Yoshikazu Shinohara, Yoshio Imai and Yukihiro Isoda
390-396 :
Critical Issues in Promotion of Environmentally Benign Manufacturing and Materials Processing
Tatsuhiko Aizawa, Kohmei Halada and Timothy G. Gutowski
397-405 :
New Step of Ecomaterial to Break through the Barrier between Ecomaterial-Selection and Eco-Design
Kohmei Halada, Tatsuhiko Aizawa and Mamoru Mabuchi
406-409 :
Magnetic Properties and Microwave Absorption Properties of Polymer-Protected Cobalt Nanoparticles
Yoshihiro Kato, Satoshi Sugimoto, Ken-ichi Shinohara, Nobuki Tezuka, Toshio Kagotani and Koichiro Inomata
410-413 :
Effects of Compositions on Formation of 1, 2 Protorides in Ti-Cr-V Alloys
Takuya Tamura, Atsunori Kamegawa, Hitoshi Takamura and Masuo Okada
414-416 :
Characterization of Small Areas of Thin-Films by Grazing-Exit Electron Probe X-ray Microanalysis
Kouichi Tsuji, Zoya Spolnik, Kazuaki Wagatsuma, Kesami Saito and Katsuhiko Asami
417-420 :
Hydrogen-Storage Properties and Structure Characterization of Melt-Spun and Annealed Mg-Ni-Nd Alloy
Jingtian Yin, Kazuhide Tanaka and Nobuo Tanaka
421-423 :
Hydrogen Absorption and Desorption Properties of Ti3Al-Ni Alloys
S. Mano, K. Hashi, K. Ishikawa and K. Aoki
424-427 :
Anomalous Magnetic Moments of Mn13 and Mn19 Clusters
Tina M. Briere, Marcel H. F. Sluiter, Vijay Kumar and Yoshiyuki Kawazoe
428-431 :
Ternary Compound Ti3SiC2: Part I. Pulse Discharge Sintering Synthesis
ZhengMing Sun, ZheFeng Zhang, Hitoshi Hashimoto and Toshihiko Abe
432-435 :
Ternary Compound Ti3SiC2: Part II. Deformation and Fracture Behavior at Different Temperatures
ZhengMing Sun, ZheFeng Zhang, Hitoshi Hashimoto and Toshihiko Abe
436-438 :
Crystal Distortion and Magnetic Structure of γ-MnPd Alloys
Tomiei Hori, Yoshinori Tsuchiya, Yoshinobu Ishii and Kiichi Hojou
439-442 :
Relationship between the Crystallographic Structure of Electrodeposited Fe-Cr Alloy Film and Its Thermal Equilibrium Diagram
Feng Wang, Kiyoshi Itoh and Tohru Watanabe
443-446 :
Microstructures and Mechanical Properties of Porous Titanium Compacts Prepared by Powder Sintering
Ik-Hyun Oh, Naoyuki Nomura and Shuji Hanada
447-450 :
Microstructure and Mechanical Properties of L12-(Al, Cr)3Ti/Ti2AlC Composites Prepared by Combustion Synthesis
Atsushi Kakitsuji, Hiroki Miyamoto, Hiroshi Mabuchi, Hiroshi Tsuda and Kenji Morii
451-454 :
Observation of Tritium Distribution in V-4Cr-4Ti alloy by Tritium Radioluminography
Hirofumi Homma, Hideyuki Saitoh, Toshihei Misawa and Toshiyuki Ohnishi
455-458 :
Adsorptive Properties of Mn-Substituted Goethite Particles for Aqueous Solutions of Lead, Copper, and Zinc
Takahiro Kusuyama, Ko Tanimura and Kazunori Sato
459-461 :
A Thermodynamic Study of the HDDR Conditions in the Sm2Fe17Nx Compound
Satoshi Ohga, Satoshi Sugimoto, Nobuki Tezuka, Toshio Kagotani and Koichiro Inomata
462-465 :
Temperature Distributions and Thermoelectrical Performance of a Porous FeSi2 Element in a Steady State of Reciprocatory Flow Combustion
Futoshi Katsuki, Toshiro Tomida, Hiroko Nakatani and Yutaka Nakano
466-469 :
The Effects of Static Strain on the Damping Capacity of High Damping Alloys
Fuxing Yin, Susumu Takamori, Yoshiaki Ohsawa, Akira Sato and Kohji Kawahara
470-473 :
Crystal Structure and Protium Absorption Properties of Ti-Cr-X Alloys
Atsunori Kamegawa, Koji Shirasaki, Takuya Tamura, Takahiro Kuriiwa, Hitoshi Takamura and Masuo Okada
474-477 :
Precise Evaluation of Charging Effect on SiO2 Particles by Simulation of Holograms
Yoshitaka Aoyama, Young-Gil Park, Chang-Woo Lee and Daisuke Shindo
478-481 :
Improvement of Ta Barrier Film Properties in Cu Interconnection by Using a Non-mass Separated Ion Beam Deposition Method
Jae-Won Lim, Yukio Ishikawa, Kiyoshi Miyake, Mutsuo Yamashita and Minoru Isshiki
482-484 :
All-Electron Mixed-Basis Calculation of Structurally Optimized Titanium Nitride Clusters
Young-Cho Bae, Hiroki Osanai, Kaoru Ohno, Marcel Sluiter and Yoshiyuki Kawazoe
485-493 :
Gold Cementation from Ammonium Thiosulfate Solution by Zinc, Copper and Aluminium Powders
Harunobu Arima, Toyohisa Fujita and Wan-Tai Yen
494-500 :
Preferential Dynamic Nucleation at Triple Junction in Copper Tricrystal During High-Temperature Deformation
Hiromi Miura, Sutandyo Andiarwanto, Keiichi Sato and Taku Sakai
501-509 :
Flow Behaviour of Aluminium-Based Materials at Ultrahigh Temperatures in the Presence of a Liquid Phase
B. Y. Lou, J. C. Huang, T. D. Wang and T. G. Langdon
510-517 :
Nano-glass Mechanism of Bulk Metallic Glass Formation
Takeshi Egami
518-522 :
Effects of Titanium and Oxygen Content on Microstructure in Low Carbon Steels
Sang-Yoon Lee, Young Joo Oh and Kyung-Woo Yi
523-525 :
High Frequency Behavior of La0.7Sr0.3MnO3 with Giant Magnetoimpedance Effect
Jifan Hu, Hongwei Qin, Juan Chen and Zhenxi Wang
526-531 :
Fabrication of Porous Iron by Unidirectional Solidification in Nitrogen Atmosphere
Soong Keun Hyun and Hideo Nakajima
532-536 :
Electrorefining Electrolyte from Copper Plant Dust
Bipra Gorai, Ranajit Kumar Jana and Zahid Husain Khan
537-543 :
Microstructure and Mechanical Properties of Gas Atomized Aluminum Alloy Powder Compact Densified by Pulsed Current Pressure Sintering Process
Takekazu Nagae, Masaru Yokota, Masateru Nose, Shogo Tomida, Katsumasa Otera, Takashi Kamiya and Shigeoki Saji
544-550 :
Relation between Widths of the Grain Boundary Energy Cusps at Special Misorientations and the Microstructural Characteristics in the Sintering of a Fe-Cu-C Alloy
Po-Liang Liu and Shun-Tian Lin
551-559 :
Computation of Partial Equilibrium Solidification with Complete Interstitial and Negligible Substitutional Solute Back Diffusion
Qing Chen and Bo Sundman
560-565 :
Change of Microhardness in Stoichiometric CuAu
Markus Spanl, Wolfgang Püschl, Boris Spru\vsil, Jind\vrich \vSachl, Vladimír \vSíma and Wolfgang Pfeiler
566-570 :
Residual Stress of TiNi Shape Memory Alloy Thin Films with (111) Single-crystal Silicon Wafer
Tingbin Wu, Bohong Jiang, Xuan Qi, Yushu Liu, Dong Xu and Li Wang
571-574 :
Oxygen Embrittlement and Effect of the Addition of Ni Element in a Bulk Amorphous Zr-Cu-Al Alloy
Yoshihiko Yokoyama, Atsushi Kobayashi, Kenzo Fukaura and Akihisa Inoue
575-579 :
Relationship Between the Liquidus Surface and Structures of Zr-Cu-Al Bulk Amorphous Alloys
Yoshihiko Yokoyama, Hiroshi Inoue, Kenzo Fukaura and Akihisa Inoue
580-584 :
Novel Hexagonal Structure of Ultra-High Strength Magnesium-Based Alloys
Akihisa Inoue, Mitsuhide Matsushita, Yoshihito Kawamura, Kenji Amiya, Kentaro Hayashi and Junich Koike
585-588 :
Effect of Pre-Deformation of Austenite on Shape Memory Properties in Fe-Mn-Si-based Alloys Containing Nb and C
Alberto Baruj, Takehiko Kikuchi, Setsuo Kajiwara and Norio Shinya
589-592 :
Structure and Magnetic Properties of Fe42.5Co42.5Nb7B8 Nanocrystalline Alloy
Baolong Shen, Hisamichi Kimura and Akihisa Inoue
593-600 :
Evaluation of Corrosion Resistance of Coated and Uncoated Stainless-Steel Separators at Cathode Side for Molten Carbonate Fuel Cell
Byung-Il Kim, Hyeoung-Ho Park, Min-Ho Lee, Shoji Goto, Setsuo Aso and Yoshinari Komatsu
601-604 :
Effect of Partial Substitution of 3d Transition Metals for Co on the Thermoelectric Properties of NaxCo2O4
Mikio Ito, Tomoya Nagira, Yoshimitsu Oda, Shigeru Katsuyama, Kazuhiko Majima and Hiroshi Nagai
608-610 :
Thermally Enhanced Glass Formation in Multilayered Cu33Zr67 Composite Particles
M. Sherif El-Eskandarany and Akihisa Inoue

[JIM HOME] [JOURNAL ARCHIVES]

© 2002 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp