Materials Transactions Online

Materials Transactions, Vol.43 No.2 (2002)

90-97 :
High Purity Metals as Primary Calibration Materials for Elemental Analysis-Their Importance and Their Certification
Ralf Matschat, Michael Czerwensky, Sandra Pattberg, Hans-Joachim Heinrich and Silke Tutschku
98-100 :
Measurement of Oxygen and Nitrogen in High Purity Metals Used as National Standards for Elemental Analysis in Germany by Classical Carrier Gas Hot Extraction (HE) and HE after Activation with Photons
Heinrich Kipphardt, Thomas Dudzus, Klaus A. Meier, Sebastian Recknagel, Martina Hedrich and Ralf Matschat
101-104 :
Determination of Trace Amounts of Antimony and Boron in High-Purity Iron and Steel by Isotope Dilution/Inductively Coupled Plasma Mass Spectrometry
Kyoko Fujimoto, Makoto Shimura and Susumu Satoh
105-110 :
Determination of Trace Element Quantities in Ultra High-Purity Iron by Spectrochemical Analysis after Chemical Separation
Kunio Takada, Tetsuya Ashino, Toshiko Itagaki, Yukitoshi Morimoto, Kazuaki Wagatsuma and Kenji Abiko
111-115 :
Chemical Form of Precipitate by Coprecipitation with Palladium for Separation of Trace Elements in High-Purity Metals
Tetsuya Ashino, Kunio Takada, Toshiko Itagaki, Shun Ito, Kazuaki Wagatsuma and Kenji Abiko
116-120 :
Neutron Activation Analysis of Ultrahigh-Purity Ti-Al Alloys in Comparison with Glow-Discharge Mass Spectrometry
Atsushi Kinomura, Seiichi Takaki, Yukihiro Nakano, Yoshihiko Hayashi, Yuji Horino and Kenji Abiko
121-124 :
Preparation of Highly Perfect Aluminum Crystal by Cold-Crucible Induction Melting in Ultra-high Vacuum
Hiroto Osono, Hiroshi Maeta, Kikuo Matsusaka and Takao Kino
125-128 :
Formation of Mono-Layer Honeycomb Structure in High-Purity Iron by Single Pass Hot-rolling
Takeshi Yokota, Susumu Satoh, Kenji Abiko and Seiichi Takaki
129-134 :
Influence of Purity and Cooling-Rate on the Microstructure of Hot-Forged Pure Irons
Toshifumi Ogawa, Nobuyuki Harima, Seiichi Takaki and Kenji Abiko
135-140 :
Influence of Carbon Additions on the Dynamic Recrystallization of High Purity α-Iron
Christophe Desrayaud, Séverine Girard, Jean Le Coze and Frank Montheillet
141-146 :
Effect of Tungsten on Mechanical Properties of High-Purity 60 mass%Cr-Fe Alloys
Masayuki Totouge, Nobuyuki Harima, Seiichi Takaki and Kenji Abiko
147-154 :
Effect of Aging on the Tensile Properties of High-Purity Fe-50Cr Alloys
Kenji Kako, Seiichi Takaki and Kenji Abiko
155-162 :
Effects of Various Alloying Elements on Tensile Properties of High-Purity Fe-18Cr-(14-16)Ni Alloys at Room Temperature
Kenji Kako, Eishi Kawakami, Joji Ohta and Masami Mayuzumi
163-167 :
Mechanical Properties of Ultrahigh-Purity Ti-45 mol%Al Alloy
Chikara Kawarada, Nobuyuki Harima, Seiichi Takaki and Kenji Abiko
168-172 :
Effect of Trace Amounts of Carbon and Nitrogen on the High Temperature Oxidation Resistance of High Purity FeCrAl Alloys
Dmytro Naumenko, Jean Le-Coze, Egbert Wessel, Werner Fischer and Willem Joseph Quadakkers
173-177 :
Self-Diffusion along Dislocations in Ultra High Purity Iron
Yumiko Shima, Yukio Ishikawa, Hiroyuki Nitta, Yoshihiro Yamazaki, Kouji Mimura, Minoru Isshiki and Yoshiaki Iijima
178-181 :
Diffusion of Cr and Fe in a High-Purity Fe-50 mass%Cr-8 mass%W Alloy
Koichi Takasawa, Yoshihiro Yamazaki, Seiichi Takaki, Kenji Abiko and Yoshiaki Iijima
182-185 :
Composition Dependence of the Zener Relaxation in High-Purity FeCr Single Crystals
Michael Hirscher and Michael Ege
186-198 :
Quenching Studies of Lattice Vacancies in High-Purity Aluminium
Abdallah Khellaf, Alfred Seeger and Roy M. Emrick
199-205 :
Effect of Silicon Particles on the EDM Characteristics of Al-Si Alloys
De-Chang Tsai, Truan-Sheng Lui and Li-Hui Chen
206-213 :
Modeling of Fluid Flow and Heat Transfer in Twin-Roll Casting of Aluminum Alloys
Amit Saxena and Yogeshwar Sahai
214-221 :
Modeling of Thermo-Mechanical Stresses in Twin-Roll Casting of Aluminum Alloys
Amit Saxena and Yogeshwar Sahai
222-226 :
Phonon Band Structures and Resonant Scattering in Na8Si46 and Cs8Sn46 Clathrates
Zhiqiang Li, John S. Tse and Kentaro Uehara
227-231 :
The Influence of Phosphorus Concentration of Electroless Plated Ni-P Film on Interfacial Structures in the Joints between Sn-Ag Solder and Ni-P Alloy Film
Takao Komiyama, Yasunori Chonan, Jin Onuki and Toshihiko Ohta
232-238 :
Quaternary Diffusion in 7000 Aluminum Alloys
Tomoshi Takahashi, Yoritoshi Minamino and Toshimi Yamane
239-245 :
Effect of Au addition on Microstructural and Mechanical Properties of Sn-Cu Eutectic Solder
Seok-Hwan Huh, Keun-Soo Kim and Katsuaki Suganuma
246-255 :
Ageing Processes in Al-Mg-Si Alloys during Continuous Heating
Yasuya Ohmori, Long Chau Doan and Kiyomichi Nakai
256-260 :
Recycling of Rare Earth Magnet Scraps Part III Carbon Removal from Nd Magnet Grinding Sludge under Vacuum Heating
Akihiko Saguchi, Kazutaka Asabe, Wataru Takahashi, Ryosuke O. Suzuki and Katsutoshi Ono
261-266 :
Surface Characterization of Amorphous Zr-Al-(Ni, Cu) Alloys Immersed in Cell-Culture Medium
Sachiko Hiromoto, Katsuhiko Asami, An Pang Tsai and Takao Hanawa
267-270 :
New Glassy Zr-Al-Fe and Zr-Al-Co Alloys with a Large Supercooled Liquid Region
Tao Zhang and Akihisa Inoue
271-276 :
Kinetics of Phase Separation in Fe-Cr-Mo Ternary Alloys
Yoshihiro Suwa, Yoshiyuki Saito, Kazumi Ochi, Takahiro Aoki, Kanako Goto and Kotaro Abe
277-280 :
Bulk Glass Formation of Ti-Zr-Hf-Cu-M (M=Fe, Co, Ni) Alloys
Liqun Ma, Limin Wang, Tao Zhang and Akihisa Inoue

[JIM HOME] [JOURNAL ARCHIVES]

© 2002 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp