Materials Transactions Online

Material Transaction, JIM, Vol.40 No.7 (1999)

571-577 :
Mechanical Properties of Nb3Al-Base Intermetallics Prepared by a Ceramic Mold-HIP Process
Katsushi Kusaka, Michihiko Fujine, Michio Okabe
and Hiroshi Endo
578-585 :
Effects of Heat Treatment on the Partially Lubricated Sliding Wear Behaviour of a Zinc-Based Alloy
B. K. Prasad
586-593 :
Recrystallization Mechanism Involving <110> Rotation in Fe-30Cr Alloy Single Crystal
Tatsuya Okada, Wen-Yue Liu and Fukuji Inoko
594-599 :
Thermodynamics of the Si-Ca-O System at 1773 K
Mitsuru Tanahashi, Nobuyuki Mouri, Toshiharu Fujisawa
and Chikabumi Yamauchi
600-605 :
Calculated Phase Diagram of the Ni-W-B Ternary System
Masao Morishita, Koichiro Koyama,
Kouichi Maeda and Guofeng Zhang
606-611 :
Superabundant Vacancy Formation in Iron under High Hydrogen Pressures: Thermal Desorption Spectroscopy
Masanao Iwamoto and Yuh Fukai
612-617 :
The Role of Iron in Ti on the Growth of Ti Silicides in Bulk Ti/Si Diffusion Couples
Toshitada Shimozaki, Takahisa Okino, Masahiro Yamane
and Chan-Gyu Lee
618-626 :
Phase Relations and Activities of Components in the Zinc-Iron-Sulfur System at 1100 and 1200 K
Satoshi Itoh
627-633 :
Dislocations in YAG Phase of a Directionally Solidified Al2O3/YAG Deformed at Room and High Temperatures
Wonjin Moon, Hiroyasu Saka and Yoshiharu Waku
634-642 :
Bulk Amorphous FC20 (Fe-C-Si) Cast Iron with Small Addition of B
Xin Min Wang and Akihisa Inoue
643-647 :
Thermal Stability and Soft Magnetic Properties of Fe-Nb-B Amorphous Alloys with High Boron Concentrations
Takaomi Itoi and Akihisa Inoue
648-653 :
Difference of the Bend-Cracks between Ti-Coated (011)[100] Si-Steel Single Crystal and Ferritic Stainless Steel
Yukio Inokuti
654-658 :
Production of TiAl Sheet with Oriented Lamellar Microstructure by Diffusional Reaction of Aluminum and Textured Titanium Foils
Hiroshi Fukutomi, Masayasu Ueno, Mizuki Nakamura,
Tetsuya Suzuki and Shiomi Kikuchi
659-664 :
Microstructure of Splat-Solidified CuInSe2
Kazuhiro Ikezawa, Somei Ohnuki, Hideaki Nagai,
Yoshinori Nakata, Masaaki Suzuki and Takeshi Okutani
665-674 :
Three-Phase Planar Eutectic Growth Models for a Ternary Eutectic System
Toshiaki Himemiya and Takateru Umeda
675-684 :
Growth Models of Two-Phase Eutectic Cell in a Ternary Eutectic System: a Phase Selection Map
Toshiaki Himemiya
685-691 :
Effects of Dendrite Cell Size and Eutectic Si Particle Morphology on Fatigue Crack Growth in Cast and HIPed AC4CH Alloys
Shinji Kumai, Shoji Aoki, Sang-Won Han and Akikazu Sato
692-695 :
Visualization of Hydrogen Location in Pure Vanadium using an Imaging Plate Detector
Hideyuki Saitoh, Toshihei Misawa,
Youichi Noya and Toshiyuki Ohnishi
696-699 :
Rotating-Beam Fatigue Strength of Pd40Cu30Ni10P20 Bulk Amorphous Alloy
Yoshihiko Yokoyama, Nobuyuki Nishiyama, Kenzo Fukaura,
Hisakichi Sunada and Akihisa Inoue

[JIM HOME] [JOURNAL ARCHIVES]

© 2000 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp