Materials Transactions Online

Materials Transactions, JIM, Vol.37 No.5 (1996)

965-969 :
Mössbauer Study on the Phase Separation of Fe-Co-Si Alloys
Takeshi Moriya, Kazutaka Ukai, Kazuhiro Kato,
Manabu Kimura, Kiyoshi Yazaki, Yūichirō Isokane,
Toru Miyazaki, Takao Kozakai and Toshiyuki Koyama
970-974 :
Mathematical Approach to σ Phase Precipitation in Austenitic Stainless Steel Welds
Hisaki Okabayashi
975-982 :
Effects of Thermal Residual Stress on Mechanical Properties of SiC Whisker Reinforced Al-Mg and Al-Li Alloys Composites
Sung-Kil Hong, Hiroyasu Tezuka and Akihiko Kamio
983-987 :
Elimination of Boron in Molten Silicon by Reactive Rotating Plasma Arc Melting
Takashi Ikeda and Masafumi Maeda
988-990 :
Thermodynamic Activity in Liquid Ga-Sn Alloys Studied by EMF Method
Iwao Katayama, Kazunari Maki, Motohiro Nakano
and Takamichi Iida
991-997 :
Evaluation of High Temperature Corrosion Resistance of Al Plasma Spray Coatings in Molten Sulfates at 1073 K by Electrochemical Measurements
Chengxiang Wu and Masaru Okuyama
998-1003 :
Effect of Nb-Ion Implantation on the Oxidation Resistance of TiAl
Shigeji Taniguchi, Toshio Shibata, Takehiko Saeki,
Huixing Zhang and Xianghuai Liu
1004-1007 :
Quantification of Sulfur in Copper by Secondary Ion Mass Spectrometry (SIMS)
Yoshinobu Nakada, Kazuhisa Mine, Toshimoto Koutsuka
and Koichi Sassa
1008-1013 :
Liquid Phase Diffusion Bonding of Rene80 Using Pure Boron
Jae Pil Jung and Choon Sik Kang
1014-1020 :
Heat Storage Rate of Magnesium Nickel Hydride
Tomohiro Akiyama, Takashi Fukutani, Reijiro Takahashi
and Jun-ichiro Yagi
1021-1025 :
A MBP Modeling Involved “Thermal Engine Effect” for Crystal Growth during Rapid Unidirectional Solidification
Yibin Zhang
1026-1029 :
Anomalous X-ray Scattering Method for Determining Electron Density Distribution in Amorphous Selenium
Masatoshi Saito and Yoshio Waseda
1033-1036 :
Surface Analysis of Fe-Cr Alloy by Glancing-Incidence and -Takeoff X-ray Fluorescence Method
Kouichi Tsuji and Kichinosuke Hirokawa
1037-1043 :
Vibrational Motion of Grain Boundary in Intermetallic Compound Induced by Electron Beam Irradiation
K.Sasaki, H.Saka and T.Arii
1044-1049 :
Effects of High Magnetic Field and Tensile Stress on Martensitic Transformation Behavior and Microstructure at 4.2 K in Fe-Ni-C Alloys
Hideyuki Ohtsuka, Kotobu Nagai, Setsuo Kajiwara, Hitoshi Kitaguchi and Mitsuru Uehara
1050-1055 :
Morphology and Lattice Constants of γ" Precipitates in a Ni-18Cr-16Fe-5Nb-3Mo Alloy
Kiyoshi Kusabiraki, Shuuichi Ikeuchi and Takayuki Ooka
1056-1060 :
Formation of Silicon Nitride Thin Films by RF Ion Plating and Their Properties
Norikazu Kanemoto, Takahiro Inoue,
Takashi Daikoku and Komei Baba
1061-1066 :
Amorphization of Al-12at.%Ti-X(X=Cr,Fe,Ni,Cu) Mixed Powders by Mechanical Alloying
Shigeoki Saji, Hideki Araki, Kazuya Hashimoto, Eiji Murata
1067-1072 :
Changes in Microstructure and Mechanical Properties during Solid Sintering of Ni-Al Mixed Powder Compact
Kiyotaka MATSUURA, Toshiki KITAMURA, Masayuki KUDOH and Youichi ITOH
1073-1077 :
Mechanical Alloying of Cu-Ni-Fe Powders
A.Yanagitani, M.Murakami and Y.Tanaka
1078-1083 :
Microstructure and Mechanical Properties of TiB2-W Cermets Prepared by HIP
Dong-Gil Ahn, Akira Kawasaki, Ryuzo Watanabe
1084-1090 :
MICROGRAVITY LIQUID PHASE SINTERING AND PORE EVOLUTION
Z. Xue, S. L. Noojin, J. G. Vandegrift, A.K. Kuruvilla and J. E. Smith, Jr.
1091-1098 :
Dynamics of Planetary Ball Milling: A comparison of computer simulated processing parameters with CuO/Ni displacement reaction milling kinetics.
M.P. Dallimore and P.G. McCormick
1099-1102 :
Magnetic Properties of Amorphous Si-M(M=Fe or Co) Alloy Powder Produced by Mechanical Alloying
Hakaru Sadano and Tsuyoshi Arakawa
1103-1108 :
Monitoring of Reactive Metal's Diffusion and Reaction at Ag-Cu-Ti/ZrO2 Brazed Interface
Takahisa Yamazaki and Akio Suzumura
1109-1115 :
Diffusion Brazing of Short Al2O3 Fiber-Reinforced Aluminum Composite
Akio Suzumura and Yujin Xing
1116-1121 :
Effects of SnO2 Additives on the Bondability and Superconductivity of YBCO Superconductors
Akio Suzumura, Dai Zhigang and Hirotaka Ogawa
1122-1126 :
Grain Boundary Structure of c-BN Thin Film Synthesized by PVD Method
Wei-Lie Zhou, Yuichi Ikuhara and Tetsuya Suzuki
1127-1131 :
Microstructures and Deteriorations on Al2O3/Al Alloy Joints
Ryujiro Udo and Akiomi Kohno
1132-1137 :
Characterization Of Diamond-Dispersed Cu-Matrix Composite
T. Sano, Y. Murakoshi, H. Takagi, T. Homma, H. Takeishi and M. Mayuzumi
1138-1142 :
Tensile Strength of C- or BN- coated SiC/TiAl Single Fiber Composites
Hiroyuki Umehara, Takakazu Suzuki and Ryuichi Hayashi
1143-1147 :
Evaluation of Subcritical Crack Growth in SiC Particle Reinforced Al2O3 Composites
Yumiko Katsukawa, Byung-Nam Kim, Manabu Enoki and Teruo Kishi
1148-1155 :
Fracture Behavior in 6061 Al Alloy Matrix Composites with Different Reinforcements
Afsaneh Rabiei, Byung-Nam Kim, Manabu Enoki and Teruo Kishi
1156-1160 :
Compressive Strength and Failure Mechanisms of Laminated C/C Composites by using Acoustic Emission Method
Nobuyuki Tohyama, Byung-Nam Kim, Manabu Enoki, and Teruo Kishi
1161-1165 :
Evaluation of Interfacial Shear Strength of C/C Composites by means of Micro-Indentation Test
K. Watanabe, A. Kohyama, S. Sato, H. Serizawa,H. Tsunakawa, K. Hamada, T. Kishi
1166-1170 :
Stress Analysis of Clustered Hexagonal Prismatic Composite Cells
Paul G. Henderson, Pat L. Mangonon, and Lixing Gu
1171-1176 :
Microstructural Dependence of Aging-Induced Phase Transformationin Y2O3-Partially-Stabilized ZrO2 Polycrystals
Jing-Feng Li and Ryuzo Watanabe
1177-1181 :
BaFe12-2xCoxTixO19 (x=0, 0.6, 0.9) Films Synthesized by the Spray-ICP Technique
Yoshihito Mizoguchi, Masahiro Kagawa, Yasuhiko Syono and Toshio Hirai
1182-1185 :
Synthesis and Thermoelectric Properties of Boron-rich Silicon Borides
Lidong Chen, Takashi Goto, Jianhui Li, Toshio Hirai
1186-1189 :
Observation of Microfracture Process of TiAl-based Alloy
Kenichi Mori, Manabu Enoki and Teruo Kishi
1190-1196 :
Change in Microstructure during Aging at 1273 K in Ti-40 at.%Al alloy
Makoto Tanimura, Yasuhide Inoue, Yasumasa Koyama and Makoto Kikuchi
1197-1203 :
Microstructure and Mechanical Properties of a Two-Phase TiAl Alloy Containing Mo in Single-, DS- and Poly-Crystalline Forms
Min-Chul Kim, Myung-Hoon Oh, Dang-Moon Wee,
Haruyuki Inui and Masaharu Yamaguchi
1204-1209 :
Degradation of Bending and Low Cycle Fatigue Properties of Ti-48mol%Al at Intermediate Temperatures by Chromium Diffusion Coating
Satoshi Takahashi, Kohji Takashima and Kazuaki Mino
1210-1213 :
Consolidation of Mn-Al-C Alloy by Powder Metallurgical Process
Y. Tanaka, A. Okawa, Y. Kuniwaki and A. Yanagitani
1214-1218 :
Modulated Structure in Al65Cu20Fe15-XMnX Alloys, Studied by Transmission Electron Microscopy
Chikai Sato, Tomoyuki Yokota, Katsuhiko Sato, and Yasumasa Koyama
1219-1223 :
Large Magnetoresistance Effect in Polycrystalline Isotropic La-AM-Mn-O Ceramics (AM=Na, K, Rb, Cs)
Masaaki Imura, Takahiro Takahashi, Hitoshi Takamura, Terumi Tanaka,
Satoshi Sugimoto, Motofumi Homma and Masuo Okada
1224-1227 :
Thermoelectric Properties of Bi-Te Module Prepared by Mechanical Alloying
K. Hasezaki, A. Yamada, H. Tsukuda and M. Araoka
1228-1231 :
An Investigation of HDDR Phenomena in the Sm3(Fe, V)29 Compound
David Book, Hajime Nakamura, Satoshi Sugimoto, Toshio Kagotani,
Masuo Okada and Motofumi Homma
1232-1237 :
Magnetic Properties of Rapidly Quenched (Sm,Zr)(Fe,Co)7-N+α-Fe
T.Yamamoto, T.Hidaka, T.Yoneyama, H.Nishio and A.Fukuno
1238-1243 :
Microstructure of Heat Treated Sm-Fe-Co-V-Zr Alloys and Their Magnetic Properties after Nitriding
T. Shimono, H. Nakamura, D. Book, T. Kagotani, S. Sugimoto, M. Okada and M. Homma
1244-1246 :
Tantalum in Solid Electrolytic Capacitors- New Developments
G.J. Korinek
1247-1250 :
Reduction Mechanism of Iron-Manganese Oxide with Carbon
Kiyoshi Terayama, Takayoshi Ishiguro and Hiroki Watanabe
1251-1257 :
Anomaly in Melting Behavior and Mechanical Properties of Carbon Steels Near Their Solidus Temperature
Chong Hee Yu, Mikio Suzuki, Hiroyuki Shibata, and Toshihiko Emi

[JIM HOME] [JOURNAL ARCHIVES]

© 1996 The Japan Institute of Metals
Comments to us : editjt@jim.or.jp